IOT-ENABLED WIRELESS PICKING SYSTEM FOR WAREHOUSE Specialized IOT technology makes picking system wireless and easy-to-use CO-EXISTS WITH Wi-Fi & BLUETOOTH ELSA-Q Wireless PICK-to-LIGHT TAG & ALE Light-Directed Picking: Agile, Accurate and Adaptive Unique radio spectrum for optimum coverage without interference from existing Wi-Fi, Bluetooth or Zigbee INTERACTIVE ACTION CONFIRMATION Patented network technology guarantees data link for task confirmation ERROR-FREE PICKING IN ORDER COMMISSIONING ILLUMINA
Technical Specification AISLE LIGHT (OPTIONAL) INFRASTRUCTURE SIZE (W x H x T) mm WEIGHT, gm ANTENNA LED INDICATORS 63 x 63 x 241.4 271.
Device Setup : Access Point Setting: The Access Point has a wired connection to the base station (computer) and communicates wirelessly with the Router(s) via the M2COMM proprietary Platanus protocol. The Access Point supports up to a total of 15 Routers and has an operating range from 0m to 100m; please refer to Section 2.7 System Hardware Deployment for guidance on the correct positioning of your Access Point.
Access Point - Network Port GREEN network activity indicator—turns on when a cable connects the port to another Gigabit Ethernet port YELLOW activity indicator—Flashes to indicate network activity over that port Attach included Antenna Plug one end of the supplied Cat 5E cable into the Access Point, the other end should be plugged into your computer. Connect the supplied AC power adaptor as shown. Use only the adapter that came with your Access Point.
Router Setting: The Router(s) operate wirelessly, via the M2COMM proprietary Platanus protocol, with the Access Point and ESL Tags. Each Router supports up to a total of 1000 ESL Tags and has an operating range up to 100m; please refer to Section 2.7 System Hardware Deployment for guidance on the correct positioning of your Router.
Will flash quickly when the Router loses connection with the network, duration 30 minutes Attach included Antenna Connect the included AC power adaptor as shown. Use only the adapter that came with your Router.
Computer Configuration for ASIA LIGHT Installation : It can be seen in the diagram below that the system architecture consists of several key components; a single or multiple Access Points, several Routers, multiple End Devices (ESL tags) and the Platanus Daemon program running on a desktop. This ASIA LIGHT demo installation is designed to use either a static IP address for a single Access Point or a dynamic IP address when multiple Access Points are installed.
Select Properties Select Internet Protocol Version 4 (TCP/IPv4), and select Properties
Check Use the following IP address and enter information shown above. Select OK to apply new settings (All open windows can now be closed) IP Address Configuration (Dynamic IP) For installations that contain multiple Access Points an external TCP/IP Ethernet hub is required; setting up the IP address for each Access Point will require modification of the ASIA LIGHT Daemon Integration file, please refer to UG-ASIA LIGHT001: ASIA LIGHT Daemon Integration Guide for further details.
M2COMM Web-based ASIA LIGHT Installation Getting Install Software Due to the Confidential and Proprietary nature of core elements within the ASIA LIGHT Operating System, we currently DO NOT offer public access to the install software download. We respectfully ask that customers who have purchased M2COMM hardware contact our support staff who will direct you to a secure location from which you can obtain the install package. Please contact us at support@m2comm.
Click Next> to continue Creation of a desktop icon is optional; Click Next> to continue Click Install to continue
During this stage of the installation it is highly likely that your computer screen may change color (Blue) and that a new dialogue pop-up box will appear. DON’T PANIC! Whilst extracting the files required for the installation the ASIA LIGHT program checks your computer to ensure that it has the core Python 2.7 libraries and modules installed, if it does not find them it will automatically redirect you to the Python 2.7 install page (That’s the blue screen you maybe currently seeing).
Nothing to do here please be patient. Click Next> to continue It is necessary for you to check I accept the agreement before the Next> button becomes active.
wxPython3.0-py27 is the M2COMM additional software that works with the core Python2.7 program.
Almost done please be patient. It is not necessary to view the README.win32.txt file, but we add the option here for IT and System Administrators who wish to review it. For most users this can be un-checked.
Click Finish to exit setup The ASIA LIGHT Demo Web Portal has now been installed on your computer and you should now be able to locate his icon (for launching the application) on your computer screen. You are now ready to launch the ASIA LIGHT Demo Web application. Setting Up the Asia Light Web Portal Ensure that your ASIA LIGHT Access Point is connected to your computer that the Router(s) and tags are installed throughout your premises and are powered on.
Please type in the name of your business, store, premises, etc and click OK to continue. NOTE: Your computer has already been configured to work with the default setting for the Access Point (see Computer Configuration for System Installation Section 0). Type Yes and click OK to continue Note: If your computer IP has not been changed to match the default requirements or if you select No to the above then the installation will stop.
Locate the M2C ESL Web System icon Using your mouse, right click the icon and select Open in browser (http://localhost:88/dashboard/), the ASIA LIGHT web browser login page will now appear on your screen. ASIA LIGHT Web Portal Login ASIA LIGHT has three user profiles available for granting or restricting access to areas of the application.
The following table shows the default privileges of each of the three user profiles. It’s recommended that the first time you login into the system that you use the pre-installed Super Admin profile.
The web portal will open in your browser; default page is System Overview as shown below; The Asia Light Access Point, Router(s) and Tags will auto-connect with the web portal and are shown under Network Summary. For detailed information of the hardware select the ESL Management tab.
LED Control Request
LED Control Response Aislelight LED Control User can control ALE LED of product by warehouse.ale.led.control User select LED mode to determine blink method of LED, BLINK-SLOW is more power saving than others mode.
Aislelight LED Control Request
Aislelight LED Control Response Notification API Users may setup a post server to receive notifications from the M2C Services.
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.