Maintenance Regularly clean your wrist and the fitness tracker, especially after sweating in the exercise or being exposed to substances such as soap or detergent which may attach on the internal side of the tracker. Do NOT wash the fitness tracker with household cleanser. Please use soapless detergent, rinse thoroughly and wipe with a piece of soft towel or napkin. While the fitness tracker is water resistant, it’s not good for your skin to wear a wet band.
IMPORTANT WARRANTY INFORMATION We are happy to offer a Lifetime Warranty to all of our devices. Please simply SCAN THE CODE to below with your phone to join our VIP LIST and activate your warranty as well as receive a 30% COUPON CODE for any of our products in our entire selection. User Manual Getting to Know Your Device Color Display Screen Touch Key Fastening Straps Charging Pins NEED HELP?? Contact us at Inspiratek1@gmail.com We reply to all inquiries within 24 hours.
Assembly Tracker Body Tracker Bands Side Charging and First Use Please charge your new device for at least 10 minutes to have it activated before initial use. How to Charge 1 Align the pins of the charging clamp with the 2 metal charging pieces on the back of the device body. 2 You will see the green charging display on the screen.
Download App Power on fitness tracker device by pressing and holding the Touch Key for 5 seconds 2 Options for Download Options 1: Scan the QR code with mobile phone camera to download and install 3. Select on the ID in the form of “TRK-XXXX’” to connect device to smartphone Note: For IOS system, there will be Bluetooth Pairing Request and you can click Bluetooth "Pairing" to confirm. For Android, you can connect directly.
2. When the icon flashes as shown below, this indicates the mobile phone APP has been disconnected from the wristband, and the APP connection bracelet needs to be opened. Note: Do not be alarmed if you see this status, the fitness tracker device is still able to function properly and track results. You will simply need to open the APP to push the results to the APP. 2. For IOS, we can disconnect the device from the phone by clicking on the “Unbind Device.
Main Functions Overview Click the touch key to toggle between each function Functions Introduction Main Screen Time, date, battery status and Bluetooth connection status are shown and are synchronized when bracelet and APP are connected. Press and hold the touch key for 3 seconds on Main Screen to switch between the 5 available display styles.
3. Sleep monitoring The bracelet can automatically determine when a user is sleeping and shows a summary of sleep time for the previous night. Further information to monitor sleep quality such as Deep Sleep, Light Sleep and Awake times can be viewed in the APP. 4. Heart Rate Monitoring Click the touch area to switch to the heart rate monitoring interface, supporting real-time dynamic heart rate. Wait around 10 seconds for the real-time heart rate to display. .
which can be oxygenated. It means the concentration of oxygen in blood. Note: The heart rate, blood pressure and blood oxygen data are for reference only and should not be used for medical purposes. 7. Sports Mode Click the touch area to switch to the Sports interface. Press and hold the touch key for 3 seconds on the Sports interface to change into the Sports Selection mode. Choose between 4 modes: Running, Mountaineer (Climbing), Swim and Riding. 8.
.2 Find Mobile Phone Frequently Asked Questions Shake the bracelet or press and hold the touch key for 3 seconds. Failed to find the device when pairing The mobile phone will either vibrate or ring synchronically depending on the phone settings. 1. Check the bracelet is energized or not. Make sure the bracelet within 1 foot of the mobile phone 9.3 Power Off Press and hold the touch key for 3 seconds on the Power Off interface to shut down.
Can this be worn in the shower or exposed to water? The bracelet is rated as IP67 Waterproof and can be safely worn in water up to 1 meter deep for up to 30 minutes. There is no vibration of the bracelet to remind me after setting the notification of incoming call 1. Make sure the mobile phone Bluetooth setting is switched ON and the bracelet is connected 2. Make sure the “JYouPro” APP is running (or backstage running) for Android and IOS systems.
Safety and Warranty Important Safety Instructions The Device contains electrical equipment that may cause injury if not used properly. For example, prolonged contact may contribute to skin allergies for some users. To reduce irritation, please read the safety guidelines on the following pages to ensure proper use and care. Do not expose your device to liquid, moisture, humidity or rain while charging; do not charge your device when it is wet as it may result in electric shock and injury.
Battery Warnings of any erroneous readings. A lithium-ion battery is used in this device. If these guidelines are not followed, batteries may experience a shortened life span or may cause fire, chemical burn, electrolyte leak, and/or injury.
& tĂƌŶŝŶŐ ^ƚĂƚĞŵĞŶƚ ŚĂŶŐĞƐ Žƌ ŵŽĚŝĨŝĐĂƚŝŽŶƐ ŶŽƚ ĞdžƉƌĞƐƐůLJ ĂƉƉƌŽǀĞĚ ďLJ ƚŚĞ ƉĂƌƚLJ ƌĞƐƉŽŶƐŝďůĞ ĨŽƌ ĐŽŵƉůŝĂŶĐĞ ĐŽƵůĚ ǀŽŝĚ ƚŚĞ ƵƐĞƌ͛Ɛ ĂƵƚŚŽƌŝƚLJ ƚŽ ŽƉĞƌĂƚĞ ƚŚĞ ĞƋƵŝƉŵĞŶƚ͘ dŚŝƐ ĞƋƵŝƉŵĞŶƚ ŚĂƐ ďĞĞŶ ƚĞƐƚĞĚ ĂŶĚ ĨŽƵŶĚ ƚŽ ĐŽŵƉůLJ ǁŝƚŚ ƚŚĞ ůŝŵŝƚƐ ĨŽƌ Ă ůĂƐƐ ĚŝŐŝƚĂů ĚĞǀŝĐĞ͕ ƉƵƌƐƵĂŶƚ ƚŽ WĂƌƚ ϭϱ ŽĨ ƚŚĞ & ZƵůĞƐ͘ dŚĞƐĞ ůŝŵŝƚƐ ĂƌĞ ĚĞƐŝŐŶĞĚ ƚŽ ƉƌŽǀŝĚĞ ƌĞĂƐŽŶĂďůĞ ƉƌŽƚĞĐƚŝŽŶ ĂŐĂŝŶƐƚ ŚĂƌŵĨƵů ŝŶƚĞƌĨĞƌĞŶĐĞ ŝŶ Ă ƌĞƐŝĚĞŶƚŝĂů ŝŶƐƚĂůůĂƚŝŽŶ͘ dŚŝƐ ĞƋƵŝƉŵĞŶƚ ŐĞŶĞƌĂƚĞƐ ƵƐĞƐ ĂŶĚ ĐĂŶ ƌĂĚŝĂƚĞ ƌĂĚŝŽ
