User Guide

Connect smartphone to

your Wi-Fi network (with

the Internet).

STEP 3

STEP 4

For the rst connection, place

the camera as close to the

router as possible (1-6ft).

Note. If the router supports

two frequencies, use a 2.4 GHz

network when connecting.

1-6 ft

STEP 1

STEP 2

Connect power to the camera.

Wait for the camera to load

(approximately 1 minute).

There is a «Reset» button

at the back of the camera.

Hold this button for about

7-8 seconds. You will hear

a characteristic sound.

After a successful reset,

the camera will emit three

short «beep beep beep»

sounds.

STEP 5

STEP 6 STEP 7

Download and install

the Smart Life app in

the App Store or the

Play Market.

Go to the Smart Life

app and register a new

account.

Go to the Smart Life app.

Click «Add Device».

First select the «Video

Surveillance» category.

Then select «Smart

Camera» from the list.

PAGE 1
STEP 1 STEP 5 STEP 3 Connect power to the camera. Wait for the camera to load (approximately 1 minute). 1-6 ft For the first connection, place the camera as close to the router as possible (1-6ft). Go to the Smart Life app and register a new account. STEP 6 STEP 4 STEP 2 Download and install the Smart Life app in the App Store or the Play Market. STEP 7 Connect smartphone to your Wi-Fi network (with the Internet). There is a «Reset» button at the back of the camera.
PAGE 2
STEP 8 STEP 10 WI-FI HOME SECURITY CAMERA The full screen of your smartphone will display a QR code. You need to scan this QR code with the Morvelli FHD30 camera. A page with resetting the camera will open. We have completed this point in the previous step. Click «NEXT». FHD-30 Place your smartphone opposite the camera lens at a distance of 3-7 inches. 3-7 inc STEP 9 STEP 11 Your Wi-Fi network to which we connected earlier will be displayed. Enter the password for this network and click «NEXT».