Studiophile BX10s User Guide English
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 What’s in the Box? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Studiophile BX10s Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Subwoofer Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 Studiophile BX10s Subwoofer
English Studiophile BX10s Subwoofer • User Guide Thank you for choosing the Studiophile Series BX10s active subwoofer. M-Audio is well known for direct-field studio loudspeaker monitors, and now after extensive research and development, we are proud to present the Studiophile BX10s subwoofer. Enclosure Like the other components, the BX10s’ enclosure has an important role in shaping the overall sonic response.
Setting Up the BX10s AC Voltage Select: Since the BX10s contains its own amplifier, it must be connected to a power outlet using the detachable AC cable provided. Note that the “AC Select” switch (located below the IEC socket for the mains power cord) is user-selectable for 100-120V~50/60 Hz or 220-240V~50/60Hz operation. Before you do anything, make sure the AC voltage select switch is set to the appropriate position for your location. Multichannel (e.g., 5.
With this method, you would place the BX10s in the chair in your listening position. (Presumably, this is at the apex of an isosceles triangle between your left and right direct-field monitors.) Play some music with substantial bass frequencies into the BX10s at a comfortable listening level. (Pink noise works great for this too.) Crawl around the floor of your room and listen for a place where the sound is “fullest” but also “tight” sounding. Wherever that is—bingo!—that’s where your BX10s will go.
Appendices Appendix A - Technical Specifications Type Bass-reflex active powered subwoofer Woofer Driver 10-inch composite (treated paper/fiberglass) cone with high-temperature voice coil and damped rubber surround Frequency Response 20Hz – 200Hz (-3dB points) Crossover HP/LP linked filter sweepable from 50-200Hz; 24dB/octave 4th-order alignment Input Sensitivity 85mV pink noise input produces 100dBA output SPL at one meter with volume control at maximum Amplifier 240 VA average power into 8 Ω, discre
M-Audio USA 5795 Martin Rd., Irwindale, CA 91706 Technical Support M-Audio Germany Kuhallmand 34, D-74613 Ohringen, Germany Technical Support web: www.m-audio.com/tech e-mail: support@m-audio.de tel (pro products): (626) 633-9055 tel: +49 (0)7941 - 9870030 tel (consumer products): (626) 633-9066 fax: +49 (0)7941 98 70070 fax (shipping): (626) 633-9032 Sales Sales e-mail: info@m-audio.de e-mail: sales@m-audio.