User Guide

ManualsBrandsLynxmotion ManualsElectronicsSharp IR Range Sensor - 10cm to 80cm W/ Cable

GP2D12/GP2D15

■ Absolute Maximum Ratings

■ Outline Dimensions

(Unit : mm)

General Purpose Type Distance

Measuring Sensors

1. TVs

2. Personal computers

3. Cars

4. Copiers

■ Features

■ Applications

1. Less influence on the color of reflective objects, reflectivity

2. Line-up of distance output/distance judgement type

Distance output type (analog voltage) : GP2D12

Detecting distance : 10 to 80cm

Distance judgement type : GP2D15

Judgement distance : 24cm

(Adjustable within the range of 10 to 80cm)

3. External control circuit is unnecessary

4. Low cost

Parameter Symbol Rating Unit

CC −0.3 to +7 V

−0.3 to Vcc +0.3

°C

opr −10 to +60

−40 to +70

°C

stg

Supply voltage

Output terminal voltage

Operating temperature

Storage temperature

(Ta=25°C, Vcc=5V)

R3.75

3.75

10.1

14.75

16.34.157.5

φ3.2 hole

6.3

8.4

7.2

2-1.5

13.5

18.9

+0.5

−0.3

29.5

★

20±0.1

★

4.5

Light detector side

PWB

Lens case

1.2

3.3

Connector

Made by

J.S.T. MFG,

CO., LTD.

S3B-PH

Light emitter side

1 3

GND

❈ The dimensions marked

★

are

described the dimensions of

lens center position.

❈ Unspecified tolerance : ±0.3mm

Terminal connection

Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP

devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.

Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/

Summary of content (4 pages)

PAGE 1
GP2D12/GP2D15 GP2D12/GP2D15 General Purpose Type Distance Measuring Sensors ■ Features ■ Outline Dimensions 6.3 Lens case R3.75 φ3.2 hole 3.75 Light emitter side 10.1 4.15 1 16.3 3 Connector 1.2 Made by 3.3 J.S.T. MFG, CO., LTD. S3B-PH 13 2 +0.5 18.9−0.3 R3.75 7.5 1. TVs 2. Personal computers 3. Cars 4. Copiers Light detector side 8.4 7.2 4.5 φ3.2 hole 14.
PAGE 2
GP2D12/GP2D15 ■ Recommended Operating Conditions Parameter Operating supply voltage Symbol VCC Rating 4.5 to +5.5 Unit V ■ Electro-optical Characteristics Parameter Distance measuring range GP2D12 Output terminal voltage GP2D15 Difference of output voltage GP2D12 Distance characteristics of output GP2D15 Average Dissipation current Symbol ∆L VO VOH VOL ∆VO VO ICC MIN. 10 0.
PAGE 3
GP2D12/GP2D15 Fig.4 Distance Characteristics GP2D15 (Detection) H L Output (V) Output H Hystersis width L Output L (Non detection) H 0 5 10 15 20 25 Output switching point distance L=24±3cm 30 35 40 45 50 55 60 65 70 75 80 Distance to reflective object L (cm) Fig.5 Analog Output Voltage vs. Surface Illuminance of Reflective Object GP2D12 3.0 2.8 L=10cm 2.4 Light source equivalent to sun light Reflective object Kodak Co., Ltd.
PAGE 4
Application Circuits NOTICE ●The circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. ●Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.