MAKE THE MOST OF YOUR SEDONA SIDE BURNER ACCESSORY CARE & USE/INSTALLATION
WARNINGS WARNING Read this manual carefully and completely before using your grill to reduce the risk of: 1. 2. 3. 4. Fire Burn hazard, personal injury or property damage Ruined steaks or other unpleasant cooking experiences Unapproved installation or servicing. This product is designed for outdoor use only. Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read this manual thoroughly before installation, use, or servicing of this product.
HOW TO LIGHT YOUR GRILL accessory 1. Before each use, complete the checklist below. 2. Make sure all burner control knobs are in the “OFF” position. 3. Push and hold the control knob for 2 - 5 seconds while listening for and visually verifying the ignition spark is present. 4. Turn the knob to the “LITE” position. 5. After ignition set the knob to the desired setting.
WARNINGS WARNING • Never use dented, rusty or damaged propane cylinders. Never store additional or empty propane cylinders in the cabinet or in the vicinity of this or any other appliance. Do not store propane cylinders indoors or on their sides. • Children should never be left alone or unattended in an area where an accessory is located. Place your accessory well away from areas where children play.
a message to our customers You’ve just joined the world of Lynx cooks … a discriminating collection of amateur and professional chefs that take outdoor cooking to a new level. Lynx manufactures many accessory cooking appliances to compliment your Lynx grill and your desire for truly superior cooking results. Your appliance has been designed and built with meticulous attention to detail and it offers some unique and powerful features.
WARNINGS WARNING 1. The outdoor cooking gas appliance and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 0.5 psi (3.5 kPa). 2. The outdoor cooking gas appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psi (3.5 kPa).
important safety precautions Please review these important safety precautions before you use your grill accessory. 1. NEVER LEAVE THE GRILL ACCESSORY UNATTENDED WHILE COOKING. 10. Never use charcoal or any other solid fuel in the grill accessory. 2. Ensure all tie-down wires have been removed from the burners. 11. Cooking excessively fatty meats and oils will cause flare ups.
table of contents 8 | A Message to our Customers 5 Important Safety Precautions 7 Using your Accessory Accessories Covered in this Manual 9 9 Lighting Instructions for All Accessories Safety Practices and Precautions At Each New Season Purging the Gas Lines Match Lighting Low Heat Flame Adjustment 10 10 10 10 11 11 contacting lynx customer care 12 Before You Start If Shipment Arrives Damaged Important Notes Where’s the Wind? How Long is Your Run? Are You “On-the-Level”? Built-in Installations
using your accessory This manual covers several accessory appliances and optional accessories for those appliances. Accessories Covered in this Manual The LSB501 and LSB502 (Side Burner 1 & 2) feature either one or two 12,500 BTU/Hr burners for cooking smaller food items. The LSB501 and LSB502 are designed for installation in a non-combustible, built-in enclosure.
Lighting Instructions for All Accessories Safety Practices and Precautions LIGHTING INSTRUCTIONS 1. Remove burner cover completely. Do not attempt to light any burner with the cover in place WARNING 1. DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. 2. An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.
Lighting Instructions for All Accessories ...continued Match Lighting Low Heat Flame Adjustment Using a paper match or a utility lighter, hold a flame over the burner ports while you push and turn the control knob of the corresponding burner to the “lite” position. Keep your face as far away from the burner as possible. The burners on your Lynx accessory feature an adjustable low setting. If the burner does not light in 5 seconds, turn the knob off and wait 5 minutes before attempting again.
CONTACTING LYNX CUTOMER CARE Before calling Lynx Customer Care, please make sure you have the following information: • Model number • Date of purchase • Proof of purchase by the original owner Your satisfaction is of the utmost importance to us.
BEFORE YOU START WARNING • Never install this product into a combustible enclosure. Doing so could result in fire, property damage and personal injury. • Never locate the accessory under a roof or overhang, in a building, garage, shed or other such enclosed area. • Always maintain the required clearances from combustibles as detailed. Accessories are designed for outdoor use only. Never use in a garage, building, shed, breezeway, or other enclosed area.
before you start...continued Built-In Installations Clearance to Combustible Materials Lynx built-in accessories are intended for installation in a built-in enclosure constructed of non-combustible materials. Minimum clearance from the sides and back of the accessory to adjacent combustible construction below the top of unit are 12” from the sides and back. The accessory drops into the opening shown in the cutout detail drawing and hangs from its counter-top trim.
Gas & electric connections Gas Plumbing WARNING Never connect a gas line directly to the side burner. A pressure regulator must be installed on all gas equipment. All local codes require it and THE MANUFACTURER supplies the correct regulator with your accessory. Removing or failing to install the pressure regulator can result in fire and serious personal injury and will void the warranty. The accessory is factory set to use either propane (LP) or natural gas (NAT).
Gas & electric connections ...continued LP Gas Never use a cylinder with a damaged valve. The side burners that are factory preset for use with LP gas come equipped with a 4/11 regulator, Lynx part number 30781. The regulator is used for permanently plumbed, hard piped LP connections, such as those in line with a bulk cylinder. If connection to a Type 1, 20 lb LP cylinder is required a LP gas pressure regulator and hose assembly is required and must be the type specified by Lynx.
Gas & electric connections ...continued LP GAS Hook Up Natural Gas/LP BULK-TANK Hook Up NATURAL GAS HOOK-UP LP BULK-TANK HOOK-UP L.P. GAS HOOK-UP Maximum Runs for all appliances on supply line WARNING COLD WEATHER WARNING: PROPANE Extremely cold temperatures may cause your burner to light inside the burner instead of outside. Once lit, if you hear a ‘whooshing’ sound, immediately turn the burner knob off to extinguish the flame and then immediately re-light the burner.
electric connections Optional Electrical Kits In addition to the accessory burner kits, Lynx also manufactures 3 specialized electrical kits that you may purchase for your accessory, depending upon how it will be installed. Each electrical kit ships with an instructional sheet for assembly. Assembly instructions and schematics/drawings can also be found on our website at www.lynxgrills.com.
testing the installation Before turning the gas supply on, check for proper installation using the following test: 1. Plug the transformer back into the receptacle. 2. Push in the gas control knob on your accessory and watch the igniter spark. 3. Turn on the light switch on the grill. Both the grill and the grill accessory lights should operate together. This indicates a proper assembly. 4. Turn the gas on to all appliances. Fixing a Gas Leak 1. Shut off the gas supply 2.
SIDE BURNER SCHEMATICS LSB501 Side Burner LSB501 Side Burner LED Light Molex Male Female Pins MM Green Varistor MF Molex Female Male pins LEAD WITH PIN DEAD LEAD (NO PIN) MF MM Molex Female Male pins Molex Male Female Pins BURNER LSB502 Side Burner LSB502 Side Burner LED Light Molex Male Female Pins MM LED Light Green Varistor MF Molex Female Male pins LEAD WITH PIN DEAD LEAD (NO PIN) MF Molex Female Male pins 20 | MM Molex Male Female Pins SEDONA side burner accessory care & use/install
SIDE BURNER SCHEMATICS ...
cut-out dimensions for sedona built-in grills & accessories Note: Side burners may be rotated 90 degrees. cutOut NOt rEQuirED With liJs Note: For Natural Gas grills, the manufacturer recommends using 3/4” gas supply lines. Locate a 110 V 15Amp GFI outlet for rotisserie models. Countertop Notch Detail 0.56” Only required if island countertop overhangs the face of the island A 12.00” c 2.25” A 2.00” 3.50” 34.
lynx limited warranty I. Limited Lifetime Warranty The stainless steel grill body, ProSear™ burner and rotisserie infrared burner are warranted to be free from defects in material and workmanship when subjected to normal domestic use and service for the lifetime of the original purchaser. The tubular stainless steel main burners carry a limited twelve (12) year warranty. This warranty excludes surface corrosion, scratches, and discoloration which may occur during normal use.
SIDE BURNER EXPLODED PARTS VIEW LSB501 Side Burner 2 14 7 16 8 18 9 17 11 24 4 10 5 12 13 3 23 1 25 15 21 24 | 22 19 20 SEDONA side burner accessory care & use/installation 6
SIDE BURNER EXPLODED PARTS VIEW...
SIDE BURNER EXPLODED PARTS LIST ITEM NO.
INDEX A M Adjustment, Low Heat ................................................... 11 Manual Lighting ............................................................. 11 Maximum Supply Line Runs........................................... 17 B Built-in Cut-out Dimensions........................................... 22 N Natural Gas Conversion................................................. 16 Natural Gas Hookup ...................................................... 17 C Code Requirements...................
Lynx Professional Grills 5859 Rickenbacker Rd. Commerce, CA 90040 Lynx Customer Care: 888.289.5969 Fax: 323.838.1778 www.lynxgrills.