Lighting Controller Model: 850-213207 How to set up Philips smart lights and nanoleaf panels? Pleas refer this steps as below： Step 1: Connect WIFI Please scan the QR code via phone to connect network. Connect WIFI Step 2: visit website Please scan the QR code to visit website ,if your phone connect network success. Visit web site PRORIETARY & CONFIDENTIAL © All Rights Reserved Lynx Innovation, Inc.
Step 3 Bridge 1.If you want to know the bridge status ,please click “Get bridge status” button. Bridge has three kinds of status： a: the bridge works normal b. Connect fail, please check network c. Bridge has not auth talk! 2.Please click ‘Get auth talk’ button, if the bridge has not auth talk. th It will prompt ‘Please touch the button of bridge’. a:it will prompt ” Get auth talk success”, if get auth talk success. B: it will prompt ” Get auth talk fail”, if get auth talk fail. 3.
Step 4 Bulbs 1.Please click ‘Search bulbs’ button to search bulbs . It will prompt ‘Please touch the button of bridge’. a:it will prompt ” ” Search bulbs success”, if search bulbs success. B: it will prompt ” Search bulbs fail”, if search bulbs fail. 2.Please click ‘Search bulbs by serial NO.’ button to search bulbs, if some bulbs need serial NO. to search success. 3. Please click “Clear bulbs” button, if you want clear the search result. Notes: it needs search and pairs bulbs again. If you clear bulbs.
Step 5 Scene 1.Item1: List bulbs a: Click “List bulbs” button, and all the bulbs Bridge searched will be listed below. The number on bulb button is bulb ID. b: Click bulb button, and the bulb will flicker once, so you can know the position of corresponding bulb of this ID. c. You can drag the light bulb to the corresponding position on the right. The bulb pairing is complete. PRORIETARY & CONFIDENTIAL © All Rights Reserved Lynx Innovation, Inc.
Step 5 Scene 2.Item2: Colors a: The "colors include" select button will list all the bulb colors of the bridge , and below will show the parameter of the selected color. b: Below is the illustration of the parameter of color： color name :color name，Philips indoor, Philips outdoor scene use the color name to set color. Hue: range(0~65535) Saturation: range(0~254) ColorTemp: (0~650) x: CIE Color matrix x position, range(0.0~0.75) y: CIE Color matrix y position, range(0.0~0.
Step 5 Scene 2.Item2: Colors c: "Save" button: Click the "save" button after modifying the color parameter value to save it to the database. If need to add a new one, the color will be added in select button when the color name is different from the color name in “Color include” select button .
Step 5 Scene 2.Item3: Philips indoor Scene a: "Bulb ID" row: bulb ID, column 0 is the header of scene table, and other each column represents a Philips indoor bulb; b: The rest three lines include six scenes: Spooky, Holidays, Energize . c: "Save" button: After editing the Scene table, click "save" button, and the parameters will be saved to the database. PRORIETARY & CONFIDENTIAL © All Rights Reserved Lynx Innovation, Inc.
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
