NB2 IoT User Manual Model: SIT-03-0-x Lyft, Inc.
Table Of Contents Table Of Contents FCC Notices Canadian Compliance Notices Regulatory Module Integration Instructions Module Summary External Interfaces Installation Instructions Electrical Connections Mechanical Connections
FCC Notices This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Regulatory Module Integration Instructions This module has been granted modular approval for portable applications. OEM integrators for host products may use the module in their final products without additional FCC / IC (Industry Canada) certification if they meet the following conditions. Otherwise, additional FCC / IC approvals must be obtained. ● ● ● The host product with the module installed must be evaluated for simultaneous transmission requirements.
Module Summary The Lyft SIT-03-0-x module is a connectivity, location, and card reader module for use on the Lyft SCT-03-0-x shared e-scooter. The module communicates with the controllers inside of the scooter to control motor speed, braking, and lighting; and to report the status of the scooter to an internet application over LTE. This module is only intended to be used by Lyft for integration into their own products, and will not be sold to other companies or to consumers.
Mechanical Connections The Module must be mechanically affixed to the shared scooter in order to ensure that the connectors maintain connectivity during motion. Screw threads are provided for secure attachment to the shared scooter base. The mechanical mount has been designed to mate with a Lyft-designed custom plastic plate that is affixed to the SCT-03-0-x handlebar area.
Environmental Limits This module is intended for use in ambient operating temperatures ranging from -10C to 40C.
