Safety Information

REGULATORY, COMPLIANCE

AND SAFETY DOCUMENT

The name Luxul, the Luxul logo, the Luxul logo mark and Simply Connected are all trademarks and/or registered

trademarks of Luxul Wireless, Inc. All other trademarks and registered trademarks are property of their respective

holders.

12884 S. Frontrunner Blvd, Suite 201

Draper, UT 84020

1-801-822-5450

This documentation contains regulatory compliance and safety information. No part of this publication, or any other

publication may be modiﬁed or adapted in any way, for any purposes without written permission from Luxul.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment o and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void

the user’s authority to operate this equipment.

LUX-REG-COM-

Last Update:

XWC-2000

Wireless Controller

XWC2000-60318

06/03/18

PAGE 1
2884 S. Frontrunner Blvd, Suite 201 Draper, UT 84020 1-801-822-5450 REGULATORY, COMPLIANCE AND SAFETY DOCUMENT XWC-2000 Wireless Controller Last Update: 06/03/18 This documentation contains regulatory compliance and safety information. No part of this publication, or any other publication may be modified or adapted in any way, for any purposes without written permission from Luxul. ©2018 Luxul. All Rights Reserved.
PAGE 2
Warnings and Safety Information XX Ensure that the electrical circuits have appropriate grounding, overload and surge protection. XX Attach only approved power cords to the device. XX Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment operation specifications. XX DO NOT install in or near hot or humid places, such as a kitchen or bathroom. Take care to minimize exposure to excessive heat or moisture.