Simply Connected Quick Install Guide XWR-600 Dual-Band Wireless 600N Router Use the XWR-600 to: Provide an Affordable Concurrent Dual-Band Wi-Fi Network Combine High Performance Gigabit and 802.
XWR-600 Quick Install Guide Quick Install Guide Model Number: XWR-600 Dual-Band Wireless 600N Router FCC ID: W59XWR600 IC: 8584A-XWR600 © 2014 Luxul. All Rights Reserved. No part of this publication may be modified or adapted in any way, for any purposes without permission in writing from Luxul. The material in this manual is subject to change without notice. Luxul reserves the right to make changes to any product to improve reliability, function, or design.
Simply Connected PACKAGE CONTENTS The following items should be included in the box: XWR-600 Dual-Band Wireless 600N Router 2 Dual Band RPSMA Male Antennas Ethernet Cable Power Adaptor Quick Installation Guide NOTE: If any of the listed items are missing or damaged, please contact the reseller from whom you purchased for return/replacement. HARDWARE DESCRIPTION XWR-600 LED Indicators Indicator Name Status Function WPS LED 5GHz ON Indicates the XWR-600 is ready for WPS pairing.
XWR-600 Quick Install Guide Rear Panel XWR-600 Rear Panel View Antenna Ports: 2 RPSMA female antenna ports to connect the included antennas Power Input: Power adapter included NOTE: To hard reboot the router, remove the power adapter. Wait 10 seconds and re-apply power.
Simply Connected PREPARING FOR INSTALLATION System Requirements Computer supporting TCP/IP and equipped with a Web browser. Supported Web browser versions include I.E. 9.0, Firefox 3.6, Safari 5.0, Chrome 6.0, Opera 10.6 and up. The Web browser is used to configure the XWR-600. Power must be AC 100-240V~ 1.0A 50/60Hz. XWR-600 INSTALLATION Desktop Installation For use as a desktop device, position the XWR-600 on a desk or other horizontal surface with adequate room around the XWR-600 for ventilation.
XWR-600 Quick Install Guide CONFIGURATION Default IP Address The XWR-600 default IP address is 192.168.0.1. This address can be changed. However, for hassle free installation of other XenConnect™ plug and play Luxul devices, it is recommended that the default IP value be maintained. Parameter: Default IP address: Default user name: Default password: Default Value 192.168.0.1 admin admin Connect a Client Device Use a computer or mobile device to connect via Ethernet or wireless to the XWR-600.
Simply Connected WPS CONFIGURATION/RESET BUTTON Used to configure WPS (Wi-Fi Protected Setup) or restore factory default settings To configure WPS, press and hold the WPS/Reset button until the WPS LED turns on (typically about 5 seconds). The XWR-600 is now in WPS pairing mode. Follow the pairing instructions for your client device and enter the XWR-600 WPS pin number (12345678) when prompted.
XWR-600 Quick Install Guide ADVANCED SETTINGS For advanced settings information go to luxul.com WARNINGS AND SAFETY INFORMATION Verify that the electrical circuits have appropriate grounding and overload protection. Attach only approved power cords to the device. Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment operation specifications. The XWR-600 is designed for indoor use only. DO NOT place this outdoors.
Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. NOTE: (1)The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
