s USER MANUAL
Content Content ........................................................................................................................................... 1,2 1Introduction ..................................................................................................................................... 3 1.1 Acknowledgement ........................................................................................................... 3 1.2 Announcements ......................................................
4.15 Backup and Reset ......................................................................................................... 38 4.16 Date and Time .............................................................................................................. 39 4.17 Fixed-time Startup and Shutdown ................................................................................ 39 4.18 Assistance Function .....................................................................................................
1Introduction 1.1 Acknowledgement Thank you for purchasing the Nitro Phablet 9S. Its CPU is MT8321 Quad Core. It is based on Android™ 8.1 Oreo GO, and it is easy to install 3rd party apps. The Nitro Phablet 9S comes with many features includingWCDMA Connectivity,WIFI, BT, GPS,FM, Voice Call and so on. With its SIM Card feature it is easy to achieve wireless communication and internet, allowing you to have access to surf the internet anytime and anywhere.
1.3 Safety Instruction Before the operation of the Nitro Phablet 9S, please read this chapter and teach your kids about this information. For further details, please refer to the safety instructions andannouncement. Never use the Nitro Phablet 9S when driving car, to ensure safe driving. In the medical area, please abide by related rules and regulations. Please shut down the Nitro Phablet 9S when it is near to the medical area.
1.4 Abbreviation/Terminology Abbreviation/Terminology Full Name MID Mobile Internet Device WIFI Wireless Fidelity Description Mobile Internet Terminal Base on IEEE 802.11b\g\n standard wireless LAN TF Trans Flash Alternative name Micro SD, super miniature memory card 5
2 Nitro Phablet 9S Introduction 2.1 Nitro Phablet 9S Operation and Preparation Battery Charging If this navigator is first used, please use AV adaptor to fully charge it. 1. Apply the power adaptor to charge for Nitro Phablet 9S. 2.2 Nitro Phablet 9S Status and Reminder Reminder icons When some remind message appears in your reminder window, please click column and slip the screen to open the reminder list. Choose the menu you need, and confirm the information.
3 Quick Start Guide 3.1 Keys Function Keys Function Description： Power button Short press to sleep/wake up, long press to startup and shutdown. Volume +（up） increase the volume Volume -（down） decrease the volume Click it in any interface will return to main interface. HOME button （home） click it in any interface will return to previous menu Back button（back） Menu button Setting button This button will display in menu interface.
camera, right slide the unlock icon and enter into Voice Search, upward slide unlock the screen. Picture 3.3-1 3.4 Usage of Touch Screen Nitro Phablet 9S operating methods There are below methods to view the main screen, menu and application procedure in your Nitro Phablet 9S. Click When you want to use the screen, keyboard typing or choose application in the main interface, you only need to touch it by your finger.
3.5 Home Page Main interface as below picture 3.5-1, long press the blank and it will popup windows to set wallpaper, folder, widgets, and shortcut. Battery Level Notice column Picture 3.5-1 Home Return Recently Apps The extended home pages The home page can be extended beyond the wideness of screen to provide more space, which you can put new-added shortcuts and widgets. Click the blank space in home page then slide right or left to extend to the right or left of the screen.
Picture 3.5-2 The shortcut icons management in desktop application. Create folder icon in desktop 1. Drag the icons need to be put together on one icon (can also overlay several icons) as Picture 3.5-3. 2. Then click the overlaid icons, the applications can be folded, as Picture 3.5-4. Click the unnamed folder in the black box, it will pop up the hidden keyboard, the folder name can be renamed, the icons position can be changed through long press. Picture 3.
Picture 3.5-4 Remove the icons in desktop 1. Long press the icons need to be remove, then on the right above of the screen, it will appear icons. 2. Drag the icon to the above of the remove icon, till the icon become red, then move your finger to delete the icon. Change the wallpaper of desktop 1． In home page, long press any blank space in main screen, it will pop up a window to change the wallpaper. 2． Click the gallery or wallpaper gallery to select the wallpaper.
3.6 Visit Application Procedures in right top of Picture 3.5-1, enter into main interface as Picture 3.6-1, choose the application procedure you want to visit. Click Picture 3.6-1 3.7 USB Connection Return to home page Nitro Phablet 9S storage configuration Before transmitting documents, you must conduct storage configuration for your Nitro Phablet 9S: 1. Connect the Nitro Phablet 9S to your computer by Micro USB cable, the reminder column will show the remind information. 2.
Picture 3.7-1 Copy the document into memory card 1. Connect the Nitro Phablet 9S to the computer with USB cable. 2. 3. 4. 5. As Nitro Phablet 9S storage configuration, it relates to computer successfully. Open the “My computer” in your computer, check the items in “MTP devices”. Copy the documents you need into “MTP devices”. After copying finishes, unplug the USB can. 3.
Picture 3.8-1 1 Switch between capitol and lower-case Letters 2 switch the mode of words input 3 click to insert the space 4 click input to execute 5 delete the character in the left of cursor, click and hold to delete all the characters in the left on the cursor. 3.9 Operation Technique Enter widgets interface In the application interface, click widgets on the above of screen, or slide the screen, it will switch into widgets interface.
3.10 Quick Setting Swipe-down gesture from the top of the screen, there are nine shortcuts icons, such as Wi-Fi, Bluetooth, Auto-rotate, and so on. In the full Quick Settings list, you can also tap the edit button at the bottom right to rearrange the tiles or replace them with others, as Picture 3.10-1. The optional extras list is minimal: Just Hotspot, Data saver and Invert colors.
Picture 4.1-1 2. Add Network 1) Click icon in right top, as Picture 4.1-2 Picture 4.1-2 2) Input network SSID, the wireless network name, click save. 3) Click user name already saved, click connect to use network, as Picture 4.
Picture 4.1-3 3. Network Notice If you open Network Notice, when WIFI signal appears, the right bottom will remind you available Wi-Fi network, as Picture 4.1-1 4.2 Bluetooth Bluetooth function operation 1. Click setting application in main menu interface 2. Click Bluetoothand open it. 3. If somebody open Bluetooth in your surroundings, click search device in right above, then Nitro Phablet 9S will automatically search the Bluetooth device nearby. As picture 4.
Picture 4.2-1 4．Click the availableBluetooth device, it will popup request window, enter related password, and match the device to connect. 5．After match successfully, choose the operation you want to, click to enter Picture 4.2-2. Picture 4.2-2 Bluetooth setting 1. Rename tablet Click icon in right top of Picture 4.2.1. SelectRemain this device,as Picture 4.2-3.
rename it as you want. Picture 4.2-3 2.Display the file you received Choose to display the file you received in Picture 4.2-3, you can view download and upload files. 4.3 Data Usage Check SIM card data usage, as Picture 4.3-1 Picture 4.
Check WIFI data usage Slide on thedata usage page to find “Wi-Fi data usage” and click it, as Picture 4.3-2 Picture 4.3-2 4.4 More 4.4-1 Airplane Mode Airplane Mode turns off WIFI and GSM card functionality. When airplane mode is turned on, WIFI and GSM can’t get any signal, When airplane mode is turned off, WIFI and GSM module will recover to previous state. 4.4-2 VPN Open VPN, click add VPN network, as Picture 4.4-1. Input name and server address, then save.
Picture 4.4-1 Click VPN, as Picture 4.4-2, input VPN user name and password, click connect. Picture 4.4-2 4.4-3 Network sharing and portable hotspots Portable WI-FI hotspots 1. Click setting application in main menu. 2. Click more 3. Select Tethering &portable hotspot Picture 4.
Picture 4.4-4 3. Click keep WI-FI hotspots on, choose open time. 4. Return to previous menu, open portable Wi-Fihotspots, click Set up WI-FI hotspots. Picture 4.4-5 5. Set passwords you want to, password should be more than 8 numbers. 4.4-4 Mobile Networks 1.Access Point Name(APN) 2.
Network Operator Click network operator, choose SIM card you need to connect, system will search available GSM and WCDMA network, as Picture 4.4-6 Picture 4.4-6 4.4-5 GPRS data prior mode After Open GPRS data prior mode, systems willpriority chooses your network. 4.5 Sound& notification 4.5-1 Sound 1. Open settings, click Sound, as Picture 4.
Picture 4.5-1 1. Vibrate In picture 4.16, click Also vibrate for calls, Nitro Phablet 9S will vibrate inincoming call. 2. Volume In picture 4.16, click volume, you can set ringtone, media, and alarm volume, as Picture 4.5-2 Picture 4.5-2 3. Voice call Ringtone In picture 4.16, click phone ringtone to choose voice call ringtone, as Picture 4.5-3 Picture 4.5-3 4.5-2 Notification 1. Open settings, click Notification, as Picture 4.
Picture 4.5-4 2.Click on any app icon in the list, then you can choose to show notifications silently, block all notifications or don’t silence or block, as Picture 4.5-5 Picture 4.5-5 4.6 Display 4.6-1 Adjust the screen brightness 1. Click Setting application procedure. 2. Click display, choose brightness, 3. Drag the portico to adjust the brightness volume, as Picture 4.
Picture 4.6-1 4.6-2 Wallpapers 1. Click setting application. 2. Click display, click wallpaper. 3. You can choose different wallpapers as you likegallery, live wallpapers, photos, wallpapers (system default), as Picture 4.6-2 Picture 4.6-2 4.
System is defaulted as off auto rotation, , system won’t rotate Nitro Phablet 9S screen by G-sensor. 4.6-4 Sleep 4. Click setting application. 5. Click display. 6. Click sleep. 7. Set the sleep time as you want, as Picture 4.6-3 Picture 4.6-3 4.6-5 Font size Click font size to adjust the size of the text, as Picture 4.
Picture 4.6-4 4.6-6 Display size ClickDisplay size to adjust the size of the icons, 4.6-5 Picture 4.6-5 4.6-7 Screen saver Charging Case, the tablet will enter the screen saver state. 4.6-8 Mira Vision Mira Vision is a set of engines to enhance display picture quality.
4.7 Storage Open setting function, click Storage, as Picture 4.6-6 Picture 4.6-6 (1) Internal storage Internal storage is Nitro Phablet 9S local NAND storage, as Picture 4.6-7, if you need to check the storage content, you can check it in main menu. Picture 4.6-7 (2) SD card Click SD card to check the storage content, as Picture 4.
Picture 4.6-8 Safely remove or format SD card 1. Click 2. Click Settings 3. After the above two steps you can choose what you want to do, remove or format SD card in picture 4.26 Note: Removing SD card safely can protect SD card and increase its lifetime. 4.8 Battery Click setting function, select battery, you can view the battery situation, as Picture 4.
Picture 4.8-1 4.9 Application program 1. Click setting application in Apps. 2. Select application, after entering, you can manage and delete installed application. (As Picture 4.9-1) Picture 4.
4.10 Memory View the used space and available space, as Picture 4.10-1 Picture 4.10-1 4.11 Account and Sync 1. Select setting application 2. Open account and sync, as Picture 4.11-1 Picture 4.
3. Click add an account, as Picture 4.11-2 Picture 4.11-2 4. After successfully load, it will open the sync function, as Picture 4.11-3 Picture 4.11-3 4.12 Location service Click setting, select Location, as Picture 4.
Picture 4.12-1 4.13 Safety setting Set locked screen Lock the touch screen by unlock icon or password to protect your Nitro Phablet 9S. Note: After setting screen locked, you should enter the passcode each time when you startup or screen is locked Set unlocked picture 1. Click setting application in main interface. 2. Click security. 3. Click screenlock. 4. Choose pattern in text setting area. 5. Click next following the remind message. 6.
8. When you see the reminder, enter the unlock pattern, then click confirm. Picture 4.13-1 Set unlock PIN code 1. Click setting application in main interface. 2. Click security. 3. Click screen lock. 4. Choose PIN in text setting area. 5. Enter new PIN code(numbers) and click continue. 6. Enter new PIN code again and click confirm. Set unlock password 1.Click setting application in main interface. 2.Click safe. 3.Click screen locked. 4.Set password in text setting area. 5.
Picture 4.13-2 Note: Manual installing APK files needs to turn on unknown source. 4.14 Language and Input Method Click setting > select language and input method > choose language, then click Add a language, select the language you want to add from the language list, as Picture 4.14-2.Back to language preferences page , you can drag the language you want to set to the first to switch language. Picture 4.
Picture 4.14-2 Click setting, choose language and input, choose GoogleTM keyboard setting, click input language, as Picture 4.14-3 Picture 4.14-3 Choose the language you want to change in the language list, as Picture 4.
Picture 4.14-4 4.15 Backup and Reset Connect WIFI and login into your Google account, choose backup my data, system will back up your data into Google server. If you need to recovery factory reset, please click reset, as Picture 4.15-1, if you need to formulate NAND, please click reset tablet. Picture 4.
4.16 Date and Time According to the preset, system will voluntarily apply the date, zone, and time provided by internet connection. Manual set date, time and zone 1． Click Setting application. 2． Slide down the screen, then click date and time. 3． Turn off “auto setting of date and time”. 4． Turn off “auto setting zone’. 5． Click Zone Selecting, then choose the zone lists. Slide down the list to view more zones.
4.17 Fixed-time Startup and Shutdown 1. Click Setting application procedure 2. Click Schedule power on & off. 3. Operate as below Picture 4.17-1 Click it to change time startup setting Turn on/off fixed-time startup Turn on/off fixed-time shutdown Click it to change shutdown setting 4.18 Assistance Function 4.18-1. Font size Click it to make system font large size 4.18-2. Click power button to end calls When Click call, press “power” button, call will end 4.18-3.
Picture 4.18-1 4.18-4Install webpage script It will allow you install webpage scrip when you open system, but it will increase the risk when you are browsing webpage. 4.19 Engineer Selection 4.19-1 USB debugging After opening USB bugging, you can use some software to read Nitro Phablet 9S software, but when USB debugging is turned on, USB storage needs to manual adjust. 4.19-2 Stay awake If you open stay awake, it will never auto sleep when your Nitro Phablet 9S is charging. 4.
Picture 4.19-1 4.20 About Tablet Check Nitro Phablet 9S state 1. Check Setting application. 2. Click About Tablet, check Model, Android Version, Version Number and so on. 3. Click state message, check battery status, battery level, SIM status, IMEI information, IP address and so on.
5 Multi-Media 5.1 Music Enter music player: in menu or desktop click music icon to enter into music player, click the music you want to play, as Picture 5.1-1: Picture 5.1-1 Song name Previous song Picture 5.1-2 Next song Artist Drag the progress bar to adjust play progress. Operation of music player button as Picture 5.
5.2 Photo Gallery Photo gallery application can auto search photos and video files in SD card, and photo gallery will classify these photos and videos in folder. You can apply photo gallery to view and edit photos, set the photos as wallpaper and watch the video. View pictures 1. Click gallery application in main interface. 2. Enter gallery, click the folder you want to view. 3. Click the picture you want to view; the system will play it in full screen mode automatically. 4.
5.3 Camera In the main interface or desktop, click camera application procedure , enter into camera Operation of camera, Switch camera: choose Menu key, click switch front/back HDR capturing camera, as Picture 5.3-1. Auto Gesture capture capture when Flash on/off mode smile is detected View the pictures and videos Normal Camera mode Click it pictures to take Face beauty mode camera shooting mode Panoramic mode Sub menu Next channel Picture 5.3-1 5.
Current frequency Save button Previous channel Next channel Exit FM Picture 5.4-1 Save channels: Click button in the main interface to save the channel, and the channel will be saved in channels list. Note: You need to insert earphone as antenna when using FM radio, if no antenna, your Nitro Phablet 9S can’t search any frequency band.
6 Communication Function 6.1 Phone 1. Click Phone application procedure 2.Operate as Picture 6.1-1 Display phone numbers Dial phone numbers Picture 6.
6.2 Text Message 1 Enter main menu, choose application procedure. Menu (discard, insert text and settings) 2 Click“Edit new message” Directly input Add receiver phone number Send message Picture 6.2-1 6.3 Contact List Click Contact list in the main interface, enter the contact list as Picture 6.
Picture 6.3-1 Search contact: click Add contact: click button, enter search function button, enter add contact interface.
7 Internet 7.1 Browser In case of Wi-Fi or mobile internet is connected well (Please refer to Chapter 4.1 for wireless and internet setting), click IE browser in the main menu or desktop to enter the IE interface, asPicture 7.1-1 Address column Save bookmark menu Picture 7.1-1 Click address bar to input the website, click start, enter into related webpage, then you can browse the website information, as Picture 7.
Picture7.1-2 8 Split screen functions Click to enter the multi task management page, then hold down one of the cards, and drag up to the top of the screen to open the task. That first app will then appear in the top window (or on the left if you’re in landscape mode) and you’ll able to choose your second app from the app picker which displays automatically.
52
9 Other Application Procedures 9.1 Clock Click Clock procedure, enter below interface as Picture 9.1-1. There are clock, picture, music and homepage buttons. Set alarm Picture 9.1-1 9.2 Calculator 1. Click. 2. Enter the basic board of calculator. 3. Soft touch the numbers or operator in calculator to calculate.
Pictuer9.2-1 9.3 File Manager File manager will copy, cut, delete, rename the documents or the folder in the TF card, it also will share the files, install apk etc. In the main menu or desktop, click the document manager icon manager.
Picture9.3-1 a、Copy, cut, delete, rename the files and folder: choose the file or folder, long press the file or folder to enter into the interface as Picture 9.3-2, you can operate the file or folder. Picture9.3-2 b、Paste the copy or cut file: choose the file you want to paste, icon to enter into Picture 9.3-3, Picture9.3-3 C.
in the list（Picture 9.3-4） Picture 9.3-4 d、install apk file：Choose the file suffixed. apk in the file manager, you can install the third part software as reminder. e、build new folder: Choose the menu you want to build the file, click icon in right top, choose new folder, you can build new folder as reminder. 9.4 Recorder In the main interface or desktop, click recorder icon to enter into record interface, click record key to stop recording. Click Play key to start record.
Picture9.
10 Installation of Procedures 10.1 Installation Installing Applications from Google Play Store 1. Open Play Store 2. Login / Create a Google account 3. Find apps you want and installing Install the third-party application procedure 1. Click “file manager” application procedure; choose the application procedure you need to install. 2. Hold the application procedure you need to install. 3. It popup install, click install apk. 4. Finish the installation as guide, it will operate.
11 Troubleshooting 1. The first startup of Nitro Phablet 9S is slow After the Nitro Phablet 9S system upgraded, the first startup need to install the pre-installed application software, the lead time is around 2-3 minutes, the startup afterwards will be much quicker. 2. 3.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference (2) this device must accept any interference,including interference that may cause undesired operation of the device.
@2018 Maxwest and the Maxwest logo are registered trademarks of their registered owners. Android is a trademark of Google LLC; Oreo is a trademark of Mondelez International, Inc. group. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License.
