Content Content .............................................................................................................................................. 2 1 Introduction .................................................................................................................................... 4 1.1 Announcements ................................................................................................................ 4 1.2 Safety Instruction .............................................
7 Internet ......................................................................................................................................... 59 7.1 Browser .......................................................................................................................... 59 7.2 Email .............................................................................................................................. 60 8 other characteristics...........................................................
1 Introduction 1.1 Announcements Preventive maintenance 1.2 ⚫ Please always keep the Tablet dry. To avoid the device short trouble, corrosion fault and electric short, please prevent the device, battery and charger from water and moisture, and don’t operate the device or charger by wet hand. ⚫ To avoid failure of device, battery and charger, please prevent the device, battery, charger from violent shock or shake.
1.3 ⚫ Never use the tablet in the vicinage of high temperature, inflammable gas ( gas station). ⚫ Protect the tablet and accessories from kids reach scope, and avoid the kids to use the tablet without parents’ supervision. ⚫ Please comply with related rules and regulations, and respect others’ privacy and legal rights while using the tablet. ⚫ Please strictly adhere to related instructions in the manual when using USB cable to ensure the safety of the tablet or PC.
2 Nitro 7Q Introduction 2.1 Nitro 7Q Operation and Preparation Battery Charging If this navigator is first used, please use AC adaptor to fully charge it. 1. Apply the power adaptor to charge for tablet. 2.2 Nitro 7Q Status and Reminder Reminder icons When some remind message appears in your reminder window, please click column and slip the screen to open the reminder list. Choose the menu you need, and confirm the information.
3 Quick Start Guide 3.1 Keys Function Keys Function Description： Power button Short press to sleep/wake up, long press to startup and shutdown. Volume +（up） increase the volume Volume -（down） decrease the volume HOME button （ home ） Click it in any interface will return to main interface. click it in any interface will return to previous menu Back button（back） Menu button Setting button 3.2 This button will display in menu interface.
1. Screen will be closed on its own if no operation happens for some time to save battery power 2. When screen is open, press POWER key, the screen will be closed immediately. Open the screen when it is closed. If the screen is closed, short press POWER to open the screen. The screen will be locked open it, it will show the picture as below picture, upward slide unlock the screen. Picture 3.3-1 3.
Rotate For most pictures, you only need to rotate the tablet sidewise to change the screen direction from horizon to vertical. For instance, when you are typing words, and watching movies. 3.5 Home Page Main interface as below picture 3.5-1, long press the blank and it will popup windows to set wallpaper, folder, widgets, and shortcut. Batty volume Time Picture 3.5-1 Home Picture 3.
Picture 3.5-2 The shortcut icons management in desktop application. Create folder icon in desktop 1. Drag the icons need to be put together on one icon(can also overlay several icons)as Picture 3.5-3. Picture 3.5-3 2. Then click the overlaid icons, the applications can be folded, as Picture 3.5-4. Click the unnamed folder in the black box, it will popup the hidden keyboard, the folder name can be renamed (this is similar with Apple IOS system), the icons position can be changed through long press.
Picture 3.5-4 3. Long press to enter the home screen settings, as Picture 3.5-5. you can turn on the notification dots feature , A small circle will appear in the corner of the app icon to let users know which specific apps have new messages, and the long-pressed app will bring up a preview window for viewing messages.The circle's color also changes as the icon's color changes , such as On lock srceen、 Allow notification dots、Default notification sound、Do Not Disturb , Figure 3.
Picture 3.5-6 Remove the icons in desktop 1. Long press the icons need to be remove, then on the right above of the screen, it will appear icons. 2. Drag the icon to the above of the remove icon, till the icon become red, then move your finger to delete the icon. Change the wallpaper of desktop 1． In home page, long press any blank space in main screen, it will popup a window to change the wallpaper. 2． Click the gallery or wallpaper gallery to select the wallpaper.
3.6 Visit Application Procedures in right top of Picture 3.5-1, enter into main interface as Picture 3.6-1, choose the application procedure you want to visit. Click Picture 3.6-1 Return to homepage Return to the previous menu PinnedShortcuts If you press an application software, you can pop-up the sub menu, and then you can use this way to use some functions of the application quickly as Picture 3.
Picture 3.6-2 3.7 USB Connection Tablet storage configuration Before transmitting documents, you have to conduct storage configuration for your tablet: 1. Connect the tablet and computer by USB cable, the reminder column will show the remind information. 2. Open the reminder board; please view the tablet status and reminder to learn how to open the board. 3. In the reminder board, click the “USB for file transfer”, it will as below Picture 3.7-1, then click “File transfers”. 4.
Picture 3.7-1 Copy the document into memory card 1. Connect the Tablet to computer with USB cable. 2. As Tablet storage configuration, it is connected with computer successfully. 3. Open the “My computer” in your computer, check the items in “MTP devices”. 4. Copy the documents you need into “MTP devices”. 5. After copying finishes, unplug the USB can. 3.8 Typing words Use the screen keyboard When you start the procedure or choose the words or numbers edition, it will show the screen keyboard.
5 1 4 2 Picture 3.8-1 3.9 3 1 switch the capital and small letter 2 switch the mode of words input 3 click to insert the space 4 click input to execute 5 delete the character in the left of cursor, click and hold to delete all the characters in the left on the cursor. Operation Technique Enter widgets interface In the application interface, click widgets on the above of screen, or slide the screen, it will switch into widgets interface.
3.10 Quick Setting Swipe-down gesture from the top of the screen, there are nine shortcuts icons, such as Wi-Fi, Bluetooth, Auto-rotate, and so on. In the full Quick Settings list you can also tap the edit button at the bottom right to rearrange the tiles or replace them with others, as Picture 3.10-1. The optional extras list is pretty minimal: Just Hotspot, Data saver and Invert colors.
Picture 3.10-2 4 Basic Setting 4.1 Network and Internet Search 搜索框 Click icon in right top of Picture , as Picture 4.1-1, You can search for what you want.
Picture 4.1-1 You can search for what you want as Picture 4.1-2 Picture 4.1-2 4.1.1. Connect Wi-Fi (1) In the main menu or interface, choose setting application procedure. (2)Click WLAN, open wifi, Tablet will automatically search the available Wifi wireless internet. As Picture 4.1-3 (3)Choose the Wi-Fi internet you want to connect, if it has password, it will popup the password window, enter password, click connect.
Picture 4.1-3 1.Add Network 1) Click icon in right top, as Picture 4.1-4 Picture 4.1-4 2) Input network SSID, the wireless network name, click save. 3) Click user name already saved, click connect to use network, as Picture 4.
Picture 4.1-5 2.Network Notice If you open Network Notice, when WIFI signal appears, the right bottom will remind you available WLAN network, as Picture 4.1-3 4.1-2 Mobile Networks 1.Access Point Name( APN) Choose access points name (APN), choose SIM card you need to connect, Choose connect type Remark: (CMWAP transmitters data through GPRS, the webpage it visit belongs to wap webpage, and CMNET support www browse mobile phone network, it can also log in webpage in computer.
Picture 4.1-6 3.GPRS data prior mode After Open GPRS data prior mode, systems will priority chooses your network. 4.1.3 Data Usage Check SIM card data usage, as Picture 4.1-7 Picture 4.
Check WIFI data usage Slide on the data usage page to find “Wi-Fi data usage” and click it, as Picture 4.1-8 Picture 4.1-8 4.1-4 Network sharing and portable hotspots Portable WI-FI hotspots 1. Click setting application in main menu. 2. Click more when wifi is well connected, open network share and portable hotspot Picture 4.1-9 3. Click keep WI-FI hotspots on, choose open time. 4.
as Picture 4.1-10 Picture 4.1-10 5. Set passwords you want to, password should be more than 8 numbers. 6. Set Maximum connections,such as,1 user、2 users、3 users、4 users、5 users、6 users、7 users、8 users、9 users、10 users 4.1-5 VPN Open VPN, click add VPN network, as Picture 4.1-11. Input name and server address, then save.
Picture 4.1-11 Click VPN, as Picture 4.1-12, input VPN user name and password, click connect. Picture 4.1-12 4.1-6 Airplane Mode Airplane Mode can turn off WIFI and GSM card function quickly, when airplane mode is turned on, WIFI and GSM can’t get any signal, then airplane mode is turned off, WIFI and GSM module will recover to previous state. 4.2 Bluetooth Bluetooth function operation 1. Click setting application in main menu interface 2. Click Bluetooth and open it. 3.
Picture 4.2-1 4．Click the available Bluetooth device, it will popup request window, enter into related password, and match the device to connect. 5．After match successfully, choose the operation you want to, click to enter into Picture 4.2-2. Picture 4.2-2 Bluetooth setting 1.Rename tablet Click Connected devices-Pair new device-Device name as Picture 4.
rename tablet, you can rename it as you want Picture 4.2-3 2.Display the file you received Choose display the file you received in Picture 4.2-4, you can view download and upload files. Picture 4.2-4 4.3 Apps & notification 4.
1. Click setting application in Apps. 2. Select application, after enter, you can manage and delete installed application. (As Picture 4.3-1) Picture 4.3-1 4.3-2 Notification 1. Open settings, click Notification, as Picture 4.
Picture 4.3-2 2. Click on any app icon in the list, then you can choose to show notifications silently, block all notifications or don’t silence or block, as Picture 4.3-3 Picture 4.3-3 4.4 Battery Click setting function, select battery, you can view the battery situation, as Picture 4.
Picture 4.4-1 4.5 Display 4.5-1 Night Light Mode 1 . Click Setting application procedure. 2. Click display, choose Night Light Mode, 3. Click the “Turn on Now” button and it will go into night mode and the blacklight turns red , as Picture 4.
Picture 4.5-1 4.5-2 Wallpapers 1. Click setting application. 2. Click display, click wallpaper. 3. You can choose different wallpapers as you like—gallery ---photos--- wallpapers (system defect), as Picture 4.5-2 Picture 4.5-2 4.5-3 Auto rotation System is defaulted as open auto rotation, when it is turned off, system won’t rotate Tablet screen by G-sensor.
4.5-4 Sleep 1. Click setting application. 2. Click display. 3. Click sleep. 4. Set the sleep time as you want, as Picture 4.5-3 Picture 4.5-3 4.5-5 Font size Click font size to adjust the size of the text, as Picture 4.5-4 Picture 4.5-4 4.
Click Display size to adjust the size of the icons, as Picture 4.5-5 Picture 4.5-5 4.5-7 Screen saver 1.Click setting application. 2.Click display. 3.Click Screen saver. 4.Set the screensaver as you want, as Picture 4.5-6 Picture 4.5-6 4.5-8 Device theme You can turn this feature on by selecting the "Dark" option in Settings> Display > Advanced > Device theme to dim or brighten Android devices,as Picture 4.
Picture 4.5-7 4.6 Sound Open settings, click Sound, as Picture 4.
Picture 4.6-1 1.Vibrate In picture click Also vibrate for calls, Tablet will vibrate when someone calls you. 2.Volume In picture click volume, you can set ringtone, media, and alarm volume, as Picture 4.
Picture 4.6-2 3.Voice call Ringtone In picture, click phone ringtone to choose voice call ringtone, as Picture 4.6-3 Picture 4.6-3 4.Shortcut to prevent ringing Incoming calls can be controlled by pressing and holding the power and volume buttons together, as Picture 4.
Picture 4.6-4 5.Charging sounds Open setting function,click charging sounds buttoun,There will be a prompt sound output when the charging line is inserted 4.7 Storage Open setting function, click Storage, as Picture 4.7-1 Picture 4.
Internal storage is Tablet local NAND storage, as Picture 4.7-2, if you need to check the storage content, you can check it in main menu. Picture 4.7-2 Storage manager Storage manager is mainly used to help release storage space, used to delete the device above the backup photos and video files, you can choose the following way to manage, as Picture 4.
Picture 4.7-3 (2)SD card Click SD card to check the storage content ,as Picture 4.7-4 Picture 4.7-4 Safely remove or format SD card 1. Insert SD card 2. Click in picture 4.7-5 3.Click Settings 4..After the above two steps you can choose what you want to do,remove or format SD card ,as Picture 4.7-6 Note: Removing SD card safely can protect SD card and increase its lifetime.
Picture 4.7-5 Picture 4.7-6 4.8 Security&location 4.8-1 Set locked screen Lock the touch screen by unlock icon or password to protect your Tablet. Note: After setting screen locked, you should enter the pass code each time when you startup or screen is locked Set unlocked picture 1. Click setting application in main interface. 2. Click security.
3. Click screen lock. 4. Choose pattern in text setting area. 5. Click next following the remind message. 6. The unlocked pattern board pop up, there are nine touch spots, connect 4 points from vertical, horizontal or diagonal direction. As Picture 4.8-1, move your finger from the screen when finish. The system will record yours new unlock pattern. 7. Click continue. 8. When you see the reminder, enter the unlock pattern, then click confirm. Picture 4.8-1 Set unlock PIN code 1.
6.Enter the password again and the click confirm. 4.8-2 Location service Click setting, select Location, as Picture 4.8-2 Picture 4.8-2 4.9 Users & accounts 1. Select setting application 2. Open account and sync, as Picture 4.9-1 Picture 4.
3. Click add an account, as Picture 4.9-2 Picture 4.9-2 4. After successfully load, it will open the sync function, as Picture 4.9-3 Picture 4.9-3 4.10 Accessibility 4.10-1. Font size Click it to make system font large size 4.10-2. Click power button to end calls When Click call, press “power” button, call will end but not hold. 4.10-3.
Click touch and hold delay to increase time, as Picture 4.10-1 Picture 4.10-1 4.10-4 Install webpage script It will allow you install webpage scrip when you open system,, but it will increase the risk when you are browsing webpage. 4.11 System 4.11-1 Language and Input Method Click setting, select language and input method, choose language , then click Add a language, select the language you want to add from the language list, as Picture 4.11-2.
Picture 4.11-1 Picture 4.11-2 Click setting, choose language and input, choose Google keyboard setting, click input language, as Picture 4.
Picture 4.11-3 Choose the language you want to change in the language list, as Picture 4.11-4 Picture 4.11-4 4.11-2 Gestures Jump to camera Operate it to open and close of this app as Picture 4.
Picture 4.11-5 Swipe up to Home button Swipe up on Home button is mainly used to switch apps. Swipe up once to show the recently opened application interface and up twice to enter the application interface as Picture 4.11-6 Picture 4.11-6 Prevent ringing function Incoming calls can be controlled by pressing and holding the power and volume buttons together, as Picture 4.
Picture 4.11-7 4.11-3 Date and Time According to the preset, system will voluntarily apply the date, zone, and time provided by internet. as Picture 4.11-8 Manual set date, time and zone 1． Click Setting application procedure. 2． Slide down the screen, then click date and time. 3． Turn off “auto setting of date and time”. 4． Turn off “auto setting zone’. 5． Click Zone Selecting, then choose the zone lists. Slide down the list to view more zones.
Picture 4.11-8 Note: If you use the time internet provided, you will not able to set the date, time and time zone. 4.11-4 backup Connect WIFI and login your google account, choose backup my data, system will backup your data into google server. as Picture 4.11-9 Picture 4.11-9 4.11-5 System update Check to see if the system is up-to-date ,as Picture 4.
Picture 4.11-10 4.11-6 Reset options If you need to recovery factory reset, please click reset, as Picture 4.11-11, if you need to formulate NAND, please click reset tablet. Picture 4.11-11 4.11-7 Multiple users Multi-user in Android is similar to multi-user in Windows, and can support multiple users to use the system.Typically, the first user registered with the system becomes the system administrator by default.
Picture 4.11-12 Picture 4.11-12 4.11-8 Engineer Selection 1. USB debugging After opening USB dbugging, you can use some software to read Tablet software, but when USB debugging is turned on, USB storage needs to manual adjust. 2.Stay awake If you open stay awake, it will never auto sleep when your Tablet is charging. 3.Pointer Location If you open pointer location, it will display touch vertical and horizontal direction. 4.
Picture 4.11-13 4.11-8 About Tablet Check Tablet state 1.Check Setting application. 2.Click about tablet, check Owner、Device name、Emergency information、Legal information、 SIM status、Model&hardware、IMEI、Android version、IP address and so on. (1).Click Emergency information state, you can add Medical information and Emergency contacts.Adding mdeical information and emergency contacts can help first responders in an emergency.
5 Multi-Media 5.1 Music Enter into music player: in menu or desktop click music player, click the music you want to play, as Picture 5.1-1: icon to enter into music Picture 5.1-1 Random play Single/sequential cycle Artist Album Song name Picture 5.1-2 Previous song Pause/play Drag the progress bar to adjust play progress. Operation of music player button as Picture 5.
5.2 Photo Gallery Photo gallery application can auto search photos and video files in SD card, and photo gallery will classify these photos and videos in folder. You can apply photo gallery to view and edit photos, set the photos as wallpaper and watch the video. View pictures 1. Click gallery application in main interface. 2. Enter into gallery, click the folder you want to view. 3. Click the picture you want to view, the system will play it in full screen mode automatically. 4.
5.3 Camera In the main interface or desktop, click camera application procedure , enter into camera ⚫ Operation of camera ,Switch camera: choose Menu key, click switch front/back camera, as Picture 5.3-1. Click it to record Switch ICONS for front and rear cameras Click it to take pictures • Flash on/off mode Click it to enter the submenu Picture 5.3-1 • 5.
Pause/Play FM Picture 5.4-1 ⚫ Save channels: Click button in the main interface to save the channel, and the channel will be saved in channels list. Note: You need to insert earphone as antenna when using FM radio, If no antenna, your Tablet can’t search any frequency band.
6 Communication Function 6.1 Phone 1. Click Phone application procedure 2.Operate as Picture 6.1-1 Picture 6.1-1 6.2 Text Message 1 Enter into main menu, choose application procedure. 2 Click “Edit new message” as Picture 6.
Add attachments(video, pictures, etc.) • Directly Add receiver input phone number Send message Picture 6.2-1 6.3 Contact List Click Contact list in the main interface, enter into the contact list as Picture 6.3-1 Picture 6.3-1 ⚫ Search contact: click ⚫ Add contact: click button, enter into search function button, enter into add contact interface.
7 Internet 7.1 Browser In case of Wi-Fi or mobile internet is connected well (Please refer to Chapter 4.1 for wireless and internet setting), click IE browser in the main menu or desktop to enter the IE interface, as Picture 7.1-1 Address column Save bookmark Picture 7.1-1 Click address bar to input the website, click start, enter into related webpage, then you can browse the website information, as Picture 7.
Picture7.1-2 7.2 Email Email application procedure contains email setting guide, you can add the external POP3 OR IMAP email account of normal web email service provider (For instance, Google,Outlook,Hotmail,and Live,Yahoo, Gmail, Hotmail Exchange and office 365and other),as Picture 7.2-1 Picture 7.
a. Email Setting 1． After you click the sending email icon which can help you to set. , you can see the email setting guide, 2． Input your email address and password. 3． Click “Next step” button, choose your email type is POP3 or IMAP. 4． Click “Next Step” button to check whether the email box servicer can receive or send emails 5． Input the email account and display the email subject, and click finish. 6． If the email box is available, you will enter into your mail box automatically. b.
Click it and Add attachment Picture 7.2-2 8 other characteristics 8.1 New gesture navigation The Android P officially eliminates the three Android king kong buttons and replaces a virtual navigation bar similar to the one on the iPhone X. Long press: start Google smart assistant; Swipe up half: enter the switch window; Swipe up: go to the app drawer; Swipe left and right: scroll through the most recent application, back button: return (only within the application), as Picture 8.
Picture 8.1-1 8.2 PIP function 1.PIP function is a special type of multi-window mode 2.The window that is playing the video can be hovered over other apps that are in use. The floating window can be dragged anywhere and then continue working on the home screen. When playing video in full screen on Google Chrome browser, press the Home button or double-click on the multi-tasking button to return to the desktop, and the video being watched will be displayed in picture-in-picture mode. as Picture 8.
Picture8.2-1 Specific operation: 1. Is to install the latest version of chrome, then open a video site to play video, and then full screen. 2. The last home button switches background tasks and switches on automatically when switched back to the desktop. 3. Tap the video window to pause, next set, and full screen. Note: There are few applications currently supported. 8.
Picture 8.
8.4 Dark mode You can turn this feature on by selecting the 'Dark' option in Settings>System > Display > Advanced > Devicetheme to dim Android devices,as Picture 8.4-1 Picture 8.4-1 8.5 New screenshot shortcuts Say goodbye to the default Power+ Volume Down button combo, and now you can grab a screenshot at any time by clicking on the icon in the Power menu,as Picture 8.5-1 Picture 8.
9 Other Application Procedures 9.1 Clock Click Clock procedure, enter into below interface as Picture 9.1-1. There are clock, picture, music and homepage buttons. Set alarm Picture 9.1-1 9.2 Calculator 1. Click. 2. Enter into the basic board of calculator. 3. Soft touch the numbers or operator in calulator to calculate.
Pictuer9.2-1 9.3 File Manager File manager will copy, cut, delete, rename the documents or the folder in the TF card, it also will share the files, install apk etc as Picture 9.3-1 In the main menu or desktop, click the document manager icon manager. ROM External SD card Picture9.
a、Copy, cut, delete, rename the files and folder: choose the file or folder, long press the file or folder to enter into the interface as Picture 9.3-2, you can operate the file or folder. Picture9.3-2 b、Share file:choose any file, long press it, it will popup “share”, choose the share way you want in the list（Picture 9.3-4） Picture 9.3-4 c、Install apk file：Choose the file suffixed .
software as reminder. d、Build new folder: Choose the menu you want to build the file, click icon in right top, choose new folder, you can build new folder as reminder. 10 Recorder to enter into record interface, click In the main interface or desktop, click recorder icon record key to start record. Click Stop key to stop recording. Click Play key to play the recorded sound. The system will auto remind you to use or abandon this record, please choose it manually.
1. Click “file manager” application procedure; choose the application procedure you need to install. 2. Hold the application procedure you need to install. 3. It popup install, click install apk. 4. Finish the installation as guide, it will operate. Note: The third party procedure searched from internet to use on the system are all suffixed with .apk. 11.2 Uninstall Uninstall application procedure 1. Click setting icon in main interface. 2.
screen open to the lightest or under charging, Tablet may feel fever. It is normal. 4. 5. Email can’t be set or Registration of application procedure. ⚫ Ensure your internet is well connected. ⚫ Make sure your email setting way is correct. ⚫ Keep your system time and local time consistent. The system is abnormal and can’t work. When you install some third party application procedure, it may cause abnormal work, you can press Reset key(next to power port) to reset the system. 6.
Warning Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference (2) this device must accept any interference, including interference that may cause undesired operation of the device.
