888-230-2225 help@manhattancomfort.
Included in the package 01 - Base = 01 piece (box 1/2) 15 02 - Lower Bar = 02 pieces (box 2/2) 03 - Left Side Panel = 01 piece (box 2/2) 04 - Right Side Panel = 01 piece (box 2/2) 05 - Top Panel = 01 piece (box 1/2) 06 - Front of the Drawer = 02 pieces (box 2/2) 07 - Left Side Panel of the Drawer = 02 pieces (box 1/2) 08 - Right Side Panel of the Drawer = 02 pieces (box 1/2) 09 - Rear Panel of the Drawer = 02 pieces (box 2/2) 10 - Base of the Drawer = 02 pieces (box 1/2) 11 - Shelf of the Drawers = 01 piece
11 lb 11 lb Front view Rear view Step 01 Using the hardware (G) connect the part (16) onto the part (03) and the part (17) onto the part (04).
Step 02 Fix the hardware (H) onto the part (03) and the part (04) with the hardware (C ). Connect the part (16) and part (17) with the hardware (D). 04 D D D D 03 17 D D D H C D C H 16 C C H C C H C C Step 03 Connect the part (01) onto the part (02) with the hardware (B).
Step 04 Connect the part (13) onto the part (05) with the hardware (J) and the hardware (A). A A J A 13 A A 05 A Step 05 B B Connect the part (01), the part (02), the part (11) and the part (05) onto the part (03) and the part (04) with the hardware (B).
Step 06 Connect all the parts (14) joining with the part (15) and the hardware (I). I 15 14 Step 03 Step 07 04 J A 13 Connect the part (13) onto the part (03) and the part (04) joining the corners with the hardware (J) with the hardware (A).
Step 08 Connect the parts (07), (08) and (09) with the hardware (B). Apply the part (10) in the groove of the parts (07) and (08) until the groove of the part (09). 07 10 B B 09 08 B B Step 03 Step 09 Connect parts (07), (08) and (06) using the hardware (E + F). Apply the hardware (M) on the hardware (F).
Step 10 Use the hardware (C) with the hardware (L) as shown on detail. 06 L L C C 09 L L C C Step 03 Step 11 Connect the hardware (N) onto the part (06) with the hardware (C ).
Step 12 12 Apply the hardware (K) into the part (03) and the part (04) to support the part (12). 12 04 03 K Step 03 Step 13 Install the drawer fitting it into the slides fixed on the side of parts (03) and (04).
Step 13 Attention! Tipover System C = 04x O = 02x Q = 02x P= 02x wall Before you fix the hardware (Q) onto the part (05) with the hardware (C ), you will need a pencil to mark where you should drill the wall with a 3/8" drill bit to put in the hardware (P). First, approach as close as possible to the wall *press the hardware wings (P) to put in the hole that you drilled in the wall. P Hardware (P), plugged in the wall.
888-230-2225 help@manhattancomfort.
Included in the package 01 - Doors = 02 pieces 01 A = 36x B = 04x C = 06x D = 02x Tools needed (not included) 02/04 Phillips screw driver Screw driver Mulberry kit door side wardrobe
Step 01 Attention to the position of the Handle (D) when fit in the Doors (01). One up and one down. Connect the hardware (C) into the Door (01) with bolts (A). Connect the hardware (D) into the Door (01) with bolts (B).
Step 02 Side Panels of the Mulberry Side Wardrobe Connect the Door (01) into the Side Panels of the Mulberry Side Wardrobe with hardware (A). 01 A A A A A A After adjusting the Hinge lock with the bolts (A).