888-230-2225 help@manhattancomfort.
Included in the package 11 10 01 - Base Panel = 01 piece 02 - Shelf Panel = 01 piece 03 - Top Panel = 01 piece 04 - Left Side Panel = 01 piece 05 - Right Side Panel = 01 piece 06 - Lower Bar = 04 pieces 07 - Lower Lateral Panel = 02 pieces 08 - Upper Lateral Panel = 02 pieces 09 - Larger Rear Panel = 02 pieces 10 - Smaller Rear Panel = 05 pieces 11 - Union Plastic Profile = 04 pieces 12 - Aluminum Hanger Bar = 02 pieces 03 08 04 05 09 02 07 01 12 06 A = 04x B = 24x C = 32x E = 16x F = 16x G = 1
15.4 lb Hanger Bar 11 lb 15.4 lb 11 lb Hanger Bar Front view Rear view Step 01 Fix the hardware (G) onto the part (04), onto the part (05) and the part (06) with the hardware (C ).
Step 02 B B B B B B B B Connect the part (01) onto the part (06) with the hardware (B). B B B B 01 06 06 06 06 Step 03 Connect the part (04) and the part (05) onto the part (01) with the hardware (B).
Step 04 Connect the part (07) onto the part (01) with the hardware (E + F) Apply the hardware (K) on the hardware (F). Pay attention to the correct position of the edges of the parts (07). 07 07 F K F K E E E 07 E F F K K 01 01 Step 05 Connect the part (07) onto the part (02) with the hardware (E + F). Apply the hardware (K) on the hardware (F). Connect the part (02) onto the parts (04) and (05) with the hardware (B).
Step 06 Connect the part (08) onto the part (02) with the hardware (E + F) Apply the hardware (K) on the hardware (F). 08 Pay attention to the correct position of the edges of the parts (08). 08 F F E F K K FE E 02 E K K 08 02 Step 03 Step 07 B 05 B Connect the part (08) onto the part (03) with hardware (E + F). Apply the hardware (K) B on the hardware (F). Connect the part (03) onto B the parts (04) and (05) with the hardware (B).
Step 08 Connect the part (09) with the hardware (H). 09 09 H H Step 03 Step 09 Connect the part (10) with the part (11) and the hardware (H).
Step 10 Fix the hardware (I) onto the part (04) and the part (05) with the hardware (C ). Remember to fix the hardware (C ) only in the hole like in the figure. 04 I 05 C 12 Insert the hardware (J) through the part (12) before fix the Hardware (J) onto the part (02) and the part (03) with the hardware (A). J A L A I C 12 Fix the hardware (L) onto the hardware (I) with the hardware (C ) after install the part (12).
888-230-2225 help@manhattancomfort.
Included in the package 01 - Doors = 02 pieces 01 A = 24x B = 04x C = 06x D = 02x Tools needed (not included) 02/04 Phillips screw driver Screw driver Mulberry kit door corner wardrobe
Step 01 Attention to the position of the Handle (D) when fit in the Doors (01). One up and one down. Connect the hardware (C) into the Door (01) with bolts (A). Connect the hardware (D) into the Door (01) with bolts (B).
Step 02 Side Panels of the Mulberry Corner Wardrobe Connect the Door (01) into the Side Panels of the Mulberry Corner Wardrobe with hardware (A).
888-230-2225 help@manhattancomfort.
Included in the package 01 - Base = 01 piece 02 - Lower Bar = 02 pieces 03 - Left Side Panel = 01 piece 04 - Right Side Panel = 01 piece 05 - Top Panel = 01 piece 06 - Front of the Drawer = 02 pieces 07 - Left Side Panel of the Drawer = 02 pieces 08 - Right Side Panel of the Drawer = 02 pieces 09 - Rear Panel of the Drawer = 02 pieces 10 - Base of the Drawer = 02 pieces 11 - Shelf of the Drawers = 01 piece 12 - Adjustable Shelf = 02 pieces 13 - Upper Bar = 01 piece 14 - Back Panel = 05 pieces 15 - Union Pla
11 lb 11 lb Front view Rear view Step 01 Using the hardware (G) connect the part (16) onto the part (03) and the part (17) onto the part (04).
Step 02 Fix the hardware (H) onto the part (03) and the part (04) with the hardware (C ). Connect the part (16) and part (17) with the hardware (D). 04 D D D D 03 17 D D D H C D C H 16 C C H C C H C C Step 03 Connect the part (01) onto the part (02) with the hardware (B).
Step 04 Connect the part (13) onto the part (05) with the hardware (J) and the hardware (A). A A J A 13 A A 05 A Step 05 B B Connect the part (01), the part (02), the part (11) and the part (05) onto the part (03) and the part (04) with the hardware (B).
Step 06 Connect all the parts (14) joining with the part (15) and the hardware (I). I 15 14 Step 03 Step 07 04 J A 13 Connect the part (13) onto the part (03) and the part (04) joining the corners with the hardware (J) with the hardware (A).
Step 08 Connect the parts (07), (08) and (09) with the hardware (B). Apply the part (10) in the groove of the parts (07) and (08) until the groove of the part (09). 07 10 B B 09 08 B B Step 03 Step 09 Connect parts (07), (08) and (06) using the hardware (E + F). Apply the hardware (M) on the hardware (F).
Step 10 Use the hardware (C) with the hardware (L) as shown on detail. 06 L L C C 09 L L C C Step 03 Step 11 Connect the hardware (N) onto the part (06) with the hardware (C ).
Step 12 12 Apply the hardware (K) into the part (03) and the part (04) to support the part (12). 12 04 03 K Step 03 Step 13 Install the drawer fitting it into the slides fixed on the side of parts (03) and (04).
