Spec Sheet

To ensure correct use of this product,
read the “Owner’s Manual”prior to use.
Failure to follow all safeguards can result
in fire,electric shock,or other accidents.
Safety Cautions
LUXMAN CORPORATION, 1-3-1 Shinyokohama, Kouhoku-ku, Yokohama-shi, Kanagawa 222-0033, Japan
Tel: [phone] Fax: [phone] www.luxman.co.jp
LUXMAN reserves the right to alter the design and specifications without notice.
All rights reserved LUXMAN CORPORATION
2017.11-HB L-509X
* Specifications and appearance are subject to change without notice. * The products listed in this catalog do not include line cables. Please purchase cables separately.
* Setting the phase inverter switch to the B position allows balance input terminal No 2 to change to HOT, and No. 3 to COLD.
Cartridge selection switch
(
MM, MC
)
Recording switch
Line straight switch
Separate switch
Headphone jack
Monitor switch
Operation switch Speaker selector
Tone control
(
bass, treble
)
Balance control
Input selector Power meters Volume control
Monitor input terminals
Pre-out terminals
Main-in terminals
Balanced input terminals
(
1, 2
)
Phase inverter switch
(
1, 2
)
Recorder output terminals
Line input terminals
(
1, 2, 3, 4
)
Phono input terminals
Speaker terminals
(
A, B
)Signal ground
*Rear panel : European Model
Remote control
RA-17A
AC inlet
(
NO.1 GROUND, NO.2 COLD, NO.3 HOT
)
Internal configuration
ODNF 4.0
New LECUA1000
PHONO
(
MM
)
PHONO
(
MC
)
LINE
REC OUT: 180mV, PRE OUT: 1V
PHONO
(
MM
)
PHONO
(
MC
)
LINE
BAL.LINE
MAIN IN
120W + 120W
(
8Ω
)
,
220W + 220W
(
4Ω
)
Rated output
Input sensitivity/
input impedance
Output voltage
Volume adjustment
Amplification circuit
Bipolar 4-parallel push-pull
PHONO
LINE
Frequency response
0.007% or less
(
8Ω, 1kHz
)
0.06% or less
(
8Ω, 20Hz to 20kHz
)
Total harmonic distortion
S/N ratio
(
IHF-A
)
Output configuration
SPECIFICATIONS
: 2.5mV/47kΩ
: 0.3mV/100Ω
: 180mV/47kΩ
: 180mV/55kΩ
: 1.1V/47kΩ
: 20Hz to 20kHz
(
±0.5dB
)
: 20Hz to 100kHz
(
within -3dB
)
: 91dB or more
: 75dB or more
: 105dB or more
BASS: ±8dB at 100Hz
TREBLE: ±8dB at 10kHz
Net weight
Speaker terminal
Supported Y-lug terminal
dimension
Accessories
380W
150W
(
under no signal
),
0.5W
(
at standby
)
Remote control
(
RA-17A
)
Power cable
Width of part a: 16mm or less
Width of part b: 7mm or more
* Connection may not be performed
depending on the shape of the
Y-lug terminal.
Power supply 230V~
(
50Hz
)
/ 115V~
(
60Hz
)
440
(
W
)
x 193
(
H
)
x 463
(
D
)
mm
front side knob of 20mm and rear side terminal
of 37mm included in depth
Max. amount of tone control
Power consumption
External dimensions
29.3kg
(
main unit
)
Damping factor 370