User's Manual

Operating and Safety
Instructions
Item No. OSI-00005 Rev. 3/09
World Wide Induction Ranges
Model Description Voltage HZ kW Plug
6954701 Countertop – Dual, Front-to-Back
208 - 240 50/60 3.3 - 3.8 US/CDN
6954702 Countertop – Dual, Front-to-Back 208 - 240 50/60 3.3 - 3.8 Schuko
6954703 Countertop – Dual, Front-to-Back 208 - 240 50/60 3.3 - 3.8 UK
6954704 Countertop – Dual, Front-to-Back 208 - 240 50/60 3.3 - 3.8 China GND
Dual Base Model: 69547
Thank you for purchasing this Vollrath Induction Range. Before operating the unit, read and familiarize yourself with the
following operating and safety instructions. SAVE THE ORIGINAL BOX AND PACKAGING. Use this packaging to ship the
unit if repairs are needed. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
WARNING
Electric shock, fire or burn injuries can
occur if this equipment is not used
properly. To reduce risk of injury:
Plug only into grounded electrical
outlets matching the nameplate rated
voltage.
Do not leave an empty pan on an
operating unit.
Unit should only be used in a flat, level
position.
Unplug unit and let it cool before
cleaning or moving.
Do not touch the cooking surface. It
remains hot after the unit is turned off.
Do not spray controls or outside of unit
with liquids or cleaning agents.
Unplug when not in use.
Keep unit and power cord away from
open flames, electric burners or
excessive heat.
Do not heat sealed cans or containers
as they may explode.
Handle hot cookware carefully.
Do not place any objects inside the air
intake or exhaust panels.
Do not operate unattended.
Closely supervise units operating in
public areas and/or around children.
Do not operate if unit has been damaged
or is malfunctioning in any way.
FUNCTION AND PURPOSE
This unit is intended to be used with induction-ready
cookware (see below) with a flat, ferrous base measuring
11.4 cm to 26 cm wide.
INDUCTION READY COOKWARE
Ferrous stainless steel
Iron
Cast iron
UNSUITABLE COOKWARE
Cookware with a base less than 11.4 cm
Pottery, glass, aluminum, bronze or copper
cookware
Cookware with any type of footed base
INSTALLATION
This unit is to be used on a flat, level surface. The unit is not
designed to be enclosed or built into any area.
IMPORTANT: There must be a minimum of 10 cm
between the induction range and any surrounding surface to
allow sufficient airflow around the unit. Blocking the
airflow could overheat the unit.
ENGLISH

Summary of content (4 pages)