Specification

ManualsBrandsLUXIER ManualsBathSingle Hole Single-Handle Bathroom Faucet with drain in Chrome

1 BSH11-S Rev. 1 5/2020

Luxier USA

Features:

- Brass and Zinc Alloy Construction

- Single Hole (Right Hand) Installation

- 1/4 Turn Drip Free Ceramic Cartridge

- Maximum Flow Rate 1.2 gpm at 60 psi

- 2 Stage Sprayer Head

- Complies with:

NSF 61-9

ANSI / ASME A112.18.1

cUPC

IAPMO / UPC

CA AB-1953

ADA

Model Number:

BSH11-SB (Brushed Nickel)

BSH11-SC (Chrome)

BSH11-SM (Matte Black)

BSH11-SO (Oil Rubbed Bronze)

Single Handle Lavatory Faucet

Certiﬁed by

IAPMO R&T

Max. Deck Thickness 2”

* Drawing not to scale. All Measurements are approximate*

1.375” Hole Size

Approx. 21” long hose with 3/8” compression ttings

8.84”

5.9”

2”

4.72”

4.93”

Summary of content (4 pages)

PAGE 1
Single Handle Lavatory Faucet Model Number: BSH11-SB (Brushed Nickel) BSH11-SC (Chrome) BSH11-SM (Matte Black) BSH11-SO (Oil Rubbed Bronze) Certified by IAPMO R&T Features: - Brass and Zinc Alloy Construction Single Hole (Right Hand) Installation 1/4 Turn Drip Free Ceramic Cartridge Maximum Flow Rate 1.2 gpm at 60 psi 2 Stage Sprayer Head Complies with: NSF 61-9 ANSI / ASME A112.18.1 cUPC IAPMO / UPC CA AB-1953 ADA 4.93” 8.84” 5.9” 4.72” 2” Max. Deck Thickness 2” 1.375” Hole Size Approx.
PAGE 2
Thank you for purchasing Luxier products. Please read the information below and keep this installation guide for future reference. If you require assistance, please contact our customer service department at 1-877-711-8828, Monday - Friday 9AM - 5PM Pacific Time or by email at support@luxierusa.com. Limited Lifetime Warranty (For USA Only) The manufacturer warrants this product to be leak and drip free during daily normal household use for as long as it is owned by the original purchaser of this product.
PAGE 3
Important Points • This installation guide is subject to change without notice, please contact us to request the most updated version of this installation guide. • This is a general installation guideline, actual installation may vary. Consult a professional if necessary. • Read and understand this instructions completely before installation. • Please follow all local building and plumbing codes. • Product drawings in this installation guide is for illustration purpose only.
PAGE 4
Installation A C B COLD HOT A. Shut off water supply at the valves. Remove the old faucet and clean the mounting surface for installation of the new faucet. D B. Insert the faucet through the mounting hole on the counter top. E C. Slide the rubber washer and metal washer onto the mounting rod. Secure the faucet by tightening the nut from underneath the sink. F Flexible water supply line Rubber Washer Locking Nut D. Use an adjustable wrench to tighten the water supply hoses.