Instructions / Assembly

ManualsBrandsLuXeo ManualsFire Pit Patio SetsVail 48 in. Two-Tone White Round Top HDPE Fire Pit, 5-Piece with White Aspen Chairs

https://www.LuXeoUSA.com

You will benefit from:

Enhanced customer support

Expedited warranty claims

New product updates

Exclusive offers and deals

Have Assembly Questions? Missing Parts or Hardware?

PLEASE DO NOT RETURN PRODUCT TO RETAILER

Contact Customer Service Department:

Tel: 714-729-3808 * 1-855-68-LUXEO * 1-855-685-8936

Monday to Friday * 9AM – 5PM PST

www.LuXeoUSA.com

ASSEMBLY INSTRUCTIONS

READ AND SAVE THIS INSTRUCTION FOR FUTURE REFERENCE



Please read all instructions prior to assembly



Check that all parts and hardware are included before beginning assembly



Do not tighten all bolts until all parts are in place. Failure to follow these instructions may cause the

bolts to misalign during assembly



Note that there might be tools needed that are not included for this product



This package may contain small parts which should be kept away from children



Save all packing materials until assembly is completed to avoid accidentally discarding small

parts or hardware



Use caution and care when lifting the product to avoid injury and/or damage to product



Two adults are recommended for faster and ease of assembly

We love to hear from you. We strive to provide excellent customer service and products. If you are happy

with our product, please take a moment to rate us with a 5 Star review with your favorite retailer

PAGE 1

v92021

Summary of content (17 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS REGISTER To Protect Your Product https://www.LuXeoUSA.com You will benefit from: - Enhanced customer support - Expedited warranty claims - New product updates - Exclusive offers and deals READ AND SAVE THIS INSTRUCTION FOR FUTURE REFERENCE         Please read all instructions prior to assembly Check that all parts and hardware are included before beginning assembly Do not tighten all bolts until all parts are in place.
PAGE 2
USER CARE and MAINTENANCE 1. USER CARE Our furniture will not rot and requires no paint nor stain. It is a good idea to occasionally inspect the furniture fastening to ensure bolts are not loosening. Daily expansion and contraction caused by heating and cooling can occasionally loosen hardware. 2. CLEANING For Quick Cleaning - mix mild soap and warm water in bucket. Use clean wet cloth to wipe soapy mixture on surface and rinse off with water.
PAGE 3
Outdoor Vail Gas Firepit Table Model: LUX-48FPRD ASSEMBLY INSTRUCTIONS Important: Retain For Future Reference. Read Carefully. This product is intended for Outdoor Domestic use only. Not for Commercial use. Questions, Problems, Missing Parts? Before returning to your retailer, contact our excellent Customer Service Dept. 1-714-729-3808 * 1-855-68-LUXEO (Monday to Friday, PST) Email us: https://www.luxeousa.
PAGE 4
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. This appliance has been tested to and complies with the ANSI Z21.97-2014, Outdoor Decorative Gas Appliances. When connecting to a fixed piping system, the installation must conform to local codes or in the absence of local codes, to the National Fuel Gas Code. ANSI Z223.1. NFPA 54; National Fuel Gas Code; National Gas and Propane Installation Code, CSA B149.
PAGE 5
SAFETY INFORMATION This appliance has been tested to and complies withthe ANSI Z21.97–2O17,Outdoor Decorative Gas Appliances CGA CR 97–OO3 OutdoorGas Fireplaces.Theinstallationmust conform to local codes or in the absence of localcodestothe NationalFuelGasCode.ANSIZ223.1.This manual contains information about the assembly, operation and maintenance of this fire pit. General safety information is presented in these first fewpagesand is alsolocatedthroughoutthe manual.
PAGE 6
OWNERS MANUAL Important: Read these instructions carefully before starting installation of the outdoor fire table. Before beginning assembly, make sure all parts are present. Compare parts with the package contents list and hardware contents above. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts.
PAGE 7
PAGE 7
PAGE 8
PAGE 8
PAGE 9
1.Tighten two screws on the Magnetic Catch Block with a Square Head Wrench (AA). 2.Attach the Top Door Bar(H) and the Bottom Door Bar(J) to the Right Front Leg(K) and the Left Front Leg(F) using 8pcs of Screws(CC) with a Square Head Wrench(AA). 3.Insert the Left Frame(E)、the Back Frame(D) and the Right Frame(R) into the Back Legs(C)、the Left Front Leg(F) and the Right Front Leg (K).Install them using 24pcs of Screws(LL) with a Square Head Wrench(AA).
PAGE 10
4.Insert the ABS Rubber Gasket(MM) into the Bolt(DD) on the Bottom Door bar(J). 5.Position the Door Frame(G) to the side making the hole on the bottom align with the bolt on the Bottom Door bar(J). Then attach the Door Frame(G) to the Top Door Bar(H) using 1pc of Bolt(DD) with a Hexagonal Wrench(FF).
PAGE 11
6.Turn over the base,attach to the Table Top(B) using 8pcs of Bolts with Washer& Nut(GG) with a Hexagonal Wrench(FF) and Nut Wrench (BB). 7.Attach the Tank Holder(L) between the Right Frame(R) and the Left Frame(E) using 6pcs of Screws (EE) with a Hexagonal Wrench (FF).
PAGE 12
8.Attach the Stainless Steel Gas Burner Round(Q) to the Table Top(B) using 4pcs of Bolts(HH) with a Hexagonal Wrench (KK). 9.Pour the fire glass into fire bowl. Cover the Lid(A) on the fire bowl. DANGER To ensure proper function,the guard on this burner must not be covered by glass beads.
PAGE 13
Remove the Lid(A) and place the Glass Wind Guard -Round (P) on the middle of the table top(B). Make sure the control knob is in the "OFF" position. Unscrew the push button cap on the ignition module located on the control panel to access the Battery(NN) compartment.The ignition module requires one AAA size Battery(NN). Open the door and place the propane gas tank(not included) onto the tank holder. Tighten the pre assembled wing screw(JJ) clockwise to ensure the propane tank is secure.
PAGE 14
Cover the fire pit with the PVC cover(M) when not-in-use to protect the unit from weather elements.The fire pit must be COMPLETELY cool before covering.
PAGE 15
Round Fire Pit Flame/Wind Glass Guard Assembly Instruction Step 1 ： Connect two pieces glasses together with provided clip Clip Plastic glide Step 1: Install the plastic glide into a clip and install the clip to the bottom of the two glasses as shown. Secure the clip position with the screws.
PAGE 16
Step 3: Follow Step 1 and 2 to install the third piece of glass. Secure the position with the screws but do NOT tighten the screws Step 4: Follow Step 1 and 2 to install the fourth piece of glass. Secure the position with the screws but do NOT tighten the screws.
PAGE 17
Step 5: Install the final two pieces of clips and plastic glides. Secure the position with the screws but do NOT tighten the screws. Step 6: Adjust the glasses positions. Tighten all the screws and put the glass shield upside-down, so the plastic glides are at the bottom. The glass shield is now ready to use.