Cut Sheet

ManualsBrandsLutron ManualsAudio1-Gang Telephone Jack, Taupe

MAESTRO CONTROLS

Smart Dimmers Accessory Dimmers

Have Questions? Call the Lutron Hotline 800-523-9466

To order—Call Lutron Customer Service 610-282-3800

JOB NAME AREA CONTROLLED

LOCATION JOB NUMBER

TITLE PAGE NO.

STANDARDS

SPECIFICATION SUBMITTAL

PRODUCT FAMILY FEATURES

• High-tech “Smart Dimmer” with microprocessor

technology for a standard designer wallplate opening

• Features a clean, flush, stylish appearance

• Two taps on the switch brings lights on to full

brightness; press and hold the switch to slowly fade

lights to off over 10 seconds

• LED’s indicate light level and glow softly as a locator

light in the dark

• Multi-location dimming from up to 10 locations

• Uses standard single-pole and 3-way wiring for easy

installation in any home

• Raise from off

SPECIFICATION FEATURES

• Power- failure memory

• Frequency compensation

• Includes Radio Frequency Interference suppression

• Front accessible service switch (FASS

TM)

to disconnect load power

• Electrostatic discharge tested

• Precise color matching across all controls

The High-Tech Multi-Location Dimmer

Smart

Dimmer

Switch

Rocker Switch

Jacks

Ports

Custom Multigang Wallplates

15A

Receptacle

15A GFCI

Receptacle

Single

Telephone

Jack

Cable

Jack

2-gang to 6-gang wallplates

6-Port Frame

20A

Receptacle

20A GFCI

Receptacle

® Satin Colors

www.lutron.com/satincolors

One tap on to selected light

level/off; two taps full bright;

press & hold for 10-second

fade off

Press rocker to adjust light level

Front accessible service switch

(FASS

TM)

LED’S indicate light level,

glow softly

SATIN COLOR ACCESSORIES

Note: For multi-location dimming only-use one Smart

Dimmer (left) with up to nine Accessory Dimmers

Receptacles

Summary of content (10 pages)

PAGE 1
SPECIFICATION SUBMITTAL ® Satin Colors www.lutron.
PAGE 2
® Satin Colors www.lutron.com/satincolors Description Model # SMART DIMMERS Incandescent Preset Smart Dimmers Single Pole/Multi-Location 600W MSC-600MSingle Pole/Multi-Location 1000W MSC-1000MProducts above: For multi-location dimming, use one Maestro Smart Dimmer with up to nine Accessory Dimmers, MSC-AD-. Not for use with mechanical 3-way or 4-way switches. Minimum load on dimmer is 40W. Derating required if ganged, see page 5.
PAGE 3
® Satin Colors www.lutron.com/satincolors Description Rating Model # SWITCHES General Purpose Switching of all Lighting Sources and Motor Loads Single Pole, 120/277V 15A 3-way, 120/277V 15A 4-way,120/277V 15A Products above: No derating required if ganged. SC-1PSSC-3PSSC-4PS- ACCESSORIES Receptacles Receptacle 15A,125V 20A,125V GFCI Receptacle 15A,125V 20A,125V Products above: No derating required if ganged. *20 Amp GFCI receptacles offered in SW, MN, TP, BI, ES, LS and DS only.
PAGE 4
® Satin Colors www.lutron.com/satincolors Description Model # STANDARD WALLPLATES 1-Gang W: 2.94” (75mm) x H: 4.69” (119mm) x D: 0.30” (7.6mm) SC-1- 2-Gang W: 4.75” (121mm) x H: 4.69” (119mm) x D: 0.30” (7.6mm) SC-2- 3-Gang W: 6.56” (167mm) x H: 4.69” (119mm) x D: 0.30” (7.6mm) SC-3- 4-Gang W: 8.37” (213mm) x H: 4.69” (119mm) x D: 0.30” (7.6mm) SC-4- 5-Gang W: 10.18” (259mm) x H: 4.69” (119mm) x D: 0.30” (7.6mm) SC-5- 6-Gang W: 12.00” (305mm) x H: 4.69” (119mm) x D: 0.30” (7.
PAGE 5
® Satin Colors www.lutron.com/satincolors DERATING/MAXIMUM CAPACITY No side sections removed (Full Capacity) One side section removed (End Units) Two side sections removed (End Units) Incandescent Dimmers 1 600W 1000W 500W 800W 400W 650W Electronic Low Voltage 2 600W 500W 400W Magnetic Low Voltage 1 600VA (450W 2) 500VA (400W 3) 400VA (300W 2) 1000VA (800W 2) 800VA (650W 3) 650VA (500W 2) DIMENSIONS Including Satin Colors wallplates – Wallplates sold separately. Dimmer Front Profile 0.
PAGE 6
® Satin Colors www.lutron.
PAGE 7
® Satin Colors www.lutron.
PAGE 8
® Satin Colors www.lutron.com/satincolors MAESTRO CONTROLS AND ACCESSORIES PART 1 – GENERAL 1.01 SUMMARY A. Scope: Provide, install and test all switches, dimmers and related devices as specified herein for the areas indicated on the drawings, specifications, and load schedules. B. Related Sections: Section 16580 (Ballasts), Section 16570 (Dimming Systems). 1.02 REFERENCES A. UL 1472, CSA, NOM, ISO 9001 1.03 SYSTEM DESCRIPTION AND OPERATION A.
PAGE 9
® Satin Colors www.lutron.com/satincolors d. Dimmers shall be designed to withstand a short, per UL 1472 section 5.10, between load hot and either neutral or ground without damage to the dimmer. e. Dimmers shall have a high-end of no less than 90% of line voltage. 4. Magnetic Low Voltage (MLV) Transformer Dimmers a. Provide MLV dimmers for direct control of up to 1000VA of magnetic low voltage load. b.
PAGE 10
® Satin Colors b. Receptacles shall be two pole, three wire ground and rated for 15A at 125VAC. All receptacles shall be NEMA configuration type 5-15R. c. Ground-fault interrupter receptacles shall be Lutron Satin Colors style with two-pole, three-wire ground and rated 15A at 125VAC Configuration shall be of the duplex type with rectangular NEMA WD-6 design. Receptacles shall have a 5 milliampere ground-fault trip level with "test" and "reset" buttons. 3.