INSTRUCTION MANUAL Item # 1003928489 Model # 6381501331 LUTEC USA CUSTOMER SERVICE Thank you for purchasing this Lutec Coastal fixture. This product has been manufactured with the highest standards of safety and quality. Questions, problems, missing parts? Before returning please call or email our customer service hotline Monday-Friday 9am-5pm EST (Eastern Standard Time) Toll Free 1-(877) 714-8669 E-mail: service@lutec.net Website: www.lutec.
TABLE OF CONTENTS Safety Information......................................................... 2 Warranty......................................................................... 2 Package Contents........................................................ 3 Hardware Contents ...................................................... 3 Installation .................................................................... 4 Tools Required .. ............................................................
PACKAGE CONTENTS A B C Part Description Quantity A Diffuser Cage 1 B Diffuser 1 C Fixture Pan 1 HARDWARE CONTENTS NOTE: Parts are not to scale.
INSTALLATION INSTALLATION Before you begin to install this lighting fixture, ensure all parts are present. Compare parts with the Hardware Included and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product.
ASSEMBLY INSTRUCTIONS WARNING: Consult a qualified electrician if you are not certain about the installation process. Always install wiring connections in accordance with local code, ordinances and the National Electric Code. 1 WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Loosen the pre-assembled hex nut (CC1) screwed onto the threaded nipple.
ASSEMBLY INSTRUCTIONS 3 Wire connection guide: Ground wire: Wrap ground wire from outlet box around ground screw preassembled on mounting plate (CC) no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire nut. Supply wires: Connect the Neutral (White) supply wire from the outlet box to the Neutral fixture wire (White). Connect the Hot (Black) supply wire from the outlet box to the Hot fixture wire (Black).
ASSEMBLY INSTRUCTIONS 4 Carefully place the wires into the junction box. Then secure the fixture pan (C) to the threaded nipple with the hex nut (CC1) detached from the mounting plate (CC). Attach the diffuser (B) the diffuser cage (A) to the fixture pan (C), OR diffuser cage (A) can be substituted by Secondary Diffuser Ring (DD) if desired.
ASSEMBLY INSTRUCTIONS 6 Color temperature adjustment: The initial time the light is energized, the color temperature is 3000K, turn off the switch and on again within 3 seconds, the color temperature changes to 5000K. Repeat this process for desired color temperature. 6 ON 3000K OFF ON 5000K CARE AND MAINTENANCE CAUTION: Turn OFF all power to the circuit at the main circuit breaker or fuse box. DO NOT rely on the wall switch alone to turn off power.
MANUAL DE INSTRUCCIONES Artículo # 1003928489 ATENCIÓN AL CLIENTE LUTEC USA Gracias por comprar este accesorio de Lutec. Este producto ha sido fabricado con los más altos estándares de seguridad y calidad. ¿Preguntas, problemas, piezas perdidas? Antes de regresar, llame o envíe un correo electrónico a nuestra línea de atención al cliente de lunes a viernes 9 am-5pm EST (hora estándar del este) Llamada gratuita 1- (877) 714-8669 Correo electrónico: service@lutec.net Sitio web: www.lutec.
ÍNDICE Información de seguridad ............................................ 10 Garantía ......................................................................... 10 Contenido del Paquete ................................................ 11 Contenido del Hardware .............................................. 11 Instalación ..................................................................... 12 Herramientas requeridas ..............................................12 Instrucciones de ensamblaje.............
CONTENIDO DEL PAQUETE A C B Pieza Descripción Cantidad A Caja difusora 1 B Difusor 1 C Aro de fijación 1 CONTENIDO DEL HARDWARE NOTA: Las partes no están a escala.
INSTALACIÓN INSTALACIÓN Antes de empezar a instalar esta lámpara, asegúrese de que estén todas las piezas. Compare las piezas con el Herraje Incluido y con las listas de Contenido de los Paquetes. Si falta alguna pieza o está dañada, no intente armar el producto.
INSTRUCCIONES DE ENSAMBLAJE ADVERTENCIA: Los cambios o las modificaciones a esta unidad que no sean aprobados en forma expresa por la parte responsable del cumplimiento pueden invalidar el permiso del usuario para usar el equipo. ADVERTENCIA: Consulte a un electricista calificado si no está seguro sobre el proceso de instalación. Siempre instale las conexiones eléctricas en conformidad con los códigos y ordenanzas locales y el Código Eléctrico Nacional.
INSTRUCCIONES DE ENSAMBLAJE 3 Guía de conexión de cables Cable de tierra: Envuelva el cable de tierra de la caja de salida alrededor del tornillo del suelo premontado en la barra transversal (CC) no menos de 2 pulg. desde el extremo del cable. Apriete el tornillo de tierra. Si el accesorio se suministra con un cable a tierra, conecte al cable de toma de tierra con una tuerca de cable.
INSTRUCCIONES DE ENSAMBLAJE 4 Coloque cuidadosamente los cables en la caja de conexiones. Luego asegure la bandeja del accesorio (C) al mango de unión con la tuerca hexagonal (CC1) separada de la placa de montaje (CC). Coloque el difusor (B) la caja del difusor (A) en la bandeja del accesorio (C), O la caja difusora (A) puede ser sustituida. por el anillo difusor secundario (DD) si se desea.
INSTRUCCIONES DE ENSAMBLAJE 6 Ajuste de la temperatura de color: La hora inicial en que la luz se energiza, a temperatura del color, es 3000K, apague el interruptor y enciéndalo de nuevo en 3 segundos, la temperatura de color cambiará a 5000K. Repita este proceso para obtener la temperatura de color deseada. 6 ON 3000K OFF ON 5000K CUIDADO Y MANTENIMIENTO PRECAUCIÓN: Apague la alimentación en el disyuntor principal o caja de fusibles.