LUMINOSA Item #1005 169 872 Model #KFR9914A Item #0000 000 000 Model #EFG8195L-2 USE AND CARE GUIDE 4-LIGHT INTERIOR PENDANT Questions, problems, missing parts? Please consult your local The Home Depot store or email Customer Service scott_w_morris@bellsouth.net 8 a.m. - 5 p.m.
Table of Contents Tools Required ........................................... 3 Hardware Included ..................................... 3 Package Contents ...................................... 4 Installation ............................................. 5 Care and Cleaning ................................ 7 Troubleshooting .................................... 7 Table of Contents ..................................2 Safety Information .................................2 Warranty ..............................
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly. Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse from the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: Keep your receipt and these instructions for proof of purchase.
Pre-Installation (continued) PACKAGE CONTENTS Part Description Quantity A Loop 1 B Nipple 1 C Socket 4 4
Installation 1 □ □ □ □ Attaching the mounting strap to the outlet box 2 □ Screw the mounting nipple (GG) about 1/2 in. into the screw collar loop (II). Screw the mounting nipple (GG) about 3/8 in. into the mounting strap (CC). Tighten the hex nut (FF) against the mounting strap (CC) to secure the mounting nipple (GG). Attach the mounting strap (CC) to the outlet box (not included) using the outlet box screws (EE). 5 Securing the nipple Screw the loop (A) onto the nipple (B). .
Installation (continued) 3 □ □ □ □ □ □ □ Dtermining the correct length of chain 4 Use pliers and a screwdriver to twist open link at the end of the chain (JJ). Take the open link and use it to attach the chain (JJ) to the screw collar loop (II). Close the link. Trun the quick link (KK) open at other end of the chain(JJ). Remove the quick links. Place the chain (JJ) through the canopy (AA) and the ring (HH).
Installation (continued) 5 □ □ Securing the canopy 6 Place the canopy (AA) over the mounting nipple (GG), and ensure it is flush with the ceiling. Screw the ring (HH) onto the screw collar loop (II) until the canopy (AA) is held firmly against the ceiling. □ Installing bulbs Item #0000 000 000 Model #EFG8195L-2 Screw four 60-Watt maximum, incandescent medium-base bulbs (sold separately) into the sockets (C).
Questions, problems, missing parts? Please consult your local The Home Depot store or email Customer Service scott_w_morris@bellsouth.net 8 a.m. - 5 p.m., EST, Monday - Friday Retain this manual for future use.
LUMINOSA Artículo #1005 169 872 Modelo # KFR9914A GUÍA DE USO Y MANTENIMIENTO ARAÑA PARA INTERIORES DE 4 LUCES Preguntas, problemas o piezas faltantes? Por favor, consulte a su tienda local The Home Depot o envíe un correo electrónico al Servicio de Atención al Cliente (scott_w_morris@bellsouth.
Índice Herraminentas Necesarias....................... 11 Hardware Incluido .................................... 11 Contenido del Paquete ............................. 12 Instalación ........................................... 13 Mantenimiento y Limpieza ................. 15 Solución de Problemas....................... 15 Índice ....................................................10 Información de Seguridad ..................10 Garantía ................................................
Pre-Instalatión PLANIFICACIÓN DE LA INSTALACIÓN Lee todas las instrucciones antes de ensamblar. Antes de comenzar la instalación o de quitar la instalación anterior, desconecte la alimentacion apagando el interruptor del circuito o quitando el fusible en la caja de fusible. Para evitar dañar el artículo, ensámblalo sobre una superficie suave, no abrasiva, como por ejemplo una alfombra o cartón. NOTA: Conserva el recibo y estas Instrucciones como Comprobante de Compra.
Pre-Instalación (continuación) CONTENIDO DEL PAQUETE Pieza Descripción Cantidad A Lazo 1 B Boquilla 1 C Portalámpara 4 12
Installation 1 □ □ □ □ □ Acoplar el base de montaje a la caja de salida Atornille la boquilla de montaje (GG) hasta 1/2 dentro en el lazo de cuello de tornillo (II). Atornille la tuerca hexagonal (FF) en la boquilla de montaje (GG). Atornille la boquilla de montaje (GG) hasta 3/8 dentro del en el base de montaje (CC) Apriete la tuerca hexagonal (FF) contra la base de montaje (CC) para fijar la boquilla de montaje (GG).
Instalación (continuación) 3 Determinar la longitud correcta de la cadena 4 □ PRECAUCIÓN: Para evitar dañar las anillas conectoras, ábralas solo lo suficiente como para conectarlas entre sí (sobre 5mm). Cubra la cadena con un paño para evitar que se dañe el acabdo del eslabón. □ □ □ □ □ □ □ Use pinzas y un destornillador para torcer y abrir los enlaces encima de la cadena (JJ). Quite los enlaces o argollas abiertas.Abre el enlace rápido(KK) en el extreme inferior de la cadena(JJ).
Instalación (continuación) 5 □ □ 6 Fijar el dosel Coloque el dosel (AA) sobre la boquilla de montaje (GG), y asegúrese que esté al ras del techo. Atornille el aro (HH) en el lazo de cuello de tornillo (II) hasta que el dosel (AA) esté fímemente sujeto contra el techo. □ Instalar las bombillas Atornille tres bombillas incandescentes de base medio de 60 Vatios máximo (vendidos por separado) en los portalámparas (C).
Preguntas, problemas o piezas faltantes? Por favor, consulte a su tienda local The Home Depot o envíe un correo electrónico al Servicio de Atención al Cliente (scott_w_morris@bellsouth.net) de lunes a viernes, de 8 de la mañana a 5 de la tarde (hora oficial del este) Conserva este manual para referencias futuras.