Sku Number: 356-9258 OUTDOOR SECURITY LIGHT Model Number: E8197W Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-887-6326 Monday – Friday 9:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS B C A D HARDWARE CONTENTS Note: Hardware not shown actual size.
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). • Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
ASSEMBLY INSTRUCTIONS (continued) For eave mounted only: Swing the sensor head towards the mounting bracket. Mounting Bracket Controls Controls Controls Installation Steps Turn off the power at fuse or circuit box. 1. The fixture mounting bracket (A) is pre-assembled on the light fixture (B). Unscrew both the decorative cover (DD) and the fixture mounting screw (EE) in order to remove the mounting bracket (A). 1 2.
ASSEMBLY INSTRUCTIONS (continued) Adjusting the Sensor Head: 1. a: Aim sensor head toward desired detection area, maintaining a 5° - 40° downward angle to allow moisture to drain. (See Fig.1) Note: Make sure sensor head is positioned with control knob facing towards the ground. Fig.1 D the detection zone at the farthest distance you wish to detect motion. 2. Range set too high may increase false triggering. (See Fig.2-1, 2-2) Fig.2-1 Fig.
ASSEMBLY INSTRUCTIONS FUNCTION AND OPERATION(continued) 5. PHOTOCELL (PC) MODE (nighttime operation only) Ɣ 7KH OLJKW WXUQV RQ WR IXOO EULJKWQHVV DW GXVN DQG UHPDLQV ³21´ XQWLO GDZQ 6. 3Min/10Min dual timer Ɣ :KHQ WKH OLJKW RQ IRU PLQ FRPHV WR WKH HQG WKH OLJKW ZLOO IODVK WZLFH DQG GLP GRZQ WR EULJKWQHVV IRU VHFRQGV GXULQJ WKLV time, if the sensor detects additional motion, the light will continue to stay on for 10min, and so on. Notes: 1.
USER GUIDE Seƫng for single light through mobile device (Take iOS for example as below. Android will be slightly diīerent). Before you strat 1. Download the Dualux BT App from the Apple App Store or Android Google Play store. 9:41 AM 2. Launch the App and tap “Wifi”. 1 Back Dualux Take photo Choose existing photo Cancel 2 3. Tap “Register” for new accounts or “Login” for existing accounts. 9:41 AM Back 4. Enter E-Mail address, then tap “Next”.
USER GUIDE (continued) 7. Power On the light and confirm the green indicator light is blinking. Then tap “next”. 9:41 AM Back 8. Choose a 2.4GHz WiFi network and enter the WiFi password, then tap “Confirm”. 9:41 AM Back Note: Only works with 2.4GHz WiFi networks. Take photo Take photo Choose existing photo Choose existing photo Cancel Cancel 8 7 9. Connected to the lighting devices “wifi (HF-XXXXXX)”. Tap “Set wi-fi” choose a HF-XXXXXX. 9:41 AM Back 10.
FUNCTION AND OPERATION (continued) 13. The Setting list, You can set up “Functions”, “Change image”, “Rename light”, and “Restore factory defaults”. 9:41 AM Back Take photo 14. Tap the “Functions”, You can choose “Test”, “Auto”, or “Custom Setting”. Select “Test” in Manual override and adjust “Detection Distance” , “Brightness” and “CCT change” as desired. Then click “Save”. Choose existing photo Cancel 13 14 15.
FUNCTION AND OPERATION (continued) 17. Click Fig.13 “Change image”. And click “take photo” to take a photo. 18. Android:Click “ iOS:Click “ ” to grasp a your desired view. ” to grasp a your desired view. Cancel 17 18 19. Android:Click “ ” to take a photo. The iOs system does not have this step. iOS 18 Android 20. Android:Adjust the photo to trim the photo’s desired size. Then click “ ”. iOS: Click“Done” to take a photo. Crop picture 19 20 21.
FUNCTION AND OPERATION (continued) 23. Click fig.13 “Change existing photo” to choose a desired image on your device. Then click “Cancel” back to “Setting” menu list. 24. Click fig.13 “Rename light” to enter a name for the light, then click “Save”. Cancel 23 24 Restore factory defaults 25. Click fig.8 “Restore factory defaults” to restore your settings (only the light name and password) to the original conditions. Note: The photo’s settings can’t be restored by using this function. 26.
FUNCTION AND OPERATION (continued) Connecting to Alexa 1. Sigin in with amazon alexa account. 2. Select your name or someone else. 1 2 4. Select Skills & Games. 3. Launch the Alexa App then tap on the “Menu”.
FUNCTION AND OPERATION (continued) 6. Tap “ENABLE TO USE”. 5. In the search menu type “Innovation & Perfect”. then tap “Innovation & Perfect”. 5 6 8.Get successful page and press cross. 7. Enter the user name & assword from the Innovation & Perfect App. Then tap “Login”. 4 7 8 10.Discover devices for 20 seconds 9. Discover your devices.
FUNCTION AND OPERATION (continued) 12.Add your light to a group. 11. Discover a light and set up device. 4 11 13. Select a group. 12 14. Light is added to a group. 4 13 15. Tap lights. 14 16. New device is displayed in group.
FUNCTION AND OPERATION (continued) Connecting to Google Home 1. Login Google Home with account. Press 2. Tap set up device.
FUNCTION AND OPERATION (continued) 4. Select[test] Innovation & Perfect. 3. Select Works with Google. 4 5. Enter the user name & assword from the Innovation & erfect App.Then tap “Login”. 5 6. Wait for signing in. 6 7. Go back to main page. 7 8. A device links to google home automatically.
FUNCTION AND OPERATION (continued) Range Up to 70ft. (Varies with surrounding temperature) Sensing angle Up to 240º Electrical load - LED 32W Lumens 2600lm Power requirements 120 VAC, 60Hz Operating modes Test, Auto, 3H, 6H, PC Time delay 30s,1min,3min Mobile device requirements Iphone 4S or newer running IOS 8.0 x or later. Android v4.4 or later Phone must also have Bluetooth version 4.0 or later The following parts are available for reorder if damaged or missing.
CARE AND MAINTENANCE To clean, turn off and wipe with a damp, non-abrasive cloth. TROUBLESHOOTING 1) The light does not come on at all: a) Make sure the wall switch and circuit breaker are on. b) Make sure the wiring is correct. c) Make sure the Daylight turn-on(photocell) is in effect. d) Make sure the motion sensor is aimed in the right direction to cover the desired area. e) Make sure the outside air temperature is not close to the same as a person’s body heat. 2) The light comes on during the day.