User's Manual

Aqara Product Manual SJCGQ11LM

Introduction

Aqara Water Leak Sensor is used to detect water leaking and flooding. It is able to

give real-time alarm through App and control other smart hardware products via

gateway devices, such as Mijia Multifunction Gateway.

* This product must be connected to a gateway device in order to function.

Basic information

Model: SJCGQ11LM

Dimensions: 50*50*15 mm

Wireless connection: ZigBee

Working temperature: - 10

℃

- +55

℃

Working humidity: 0%- 100% RH

Device supported: Android 4.4/iOS 8.0 and above

Download App

Search for “Mijia” in App Store or scan the barcode to download Mijia App. Connect

the Sensor to a gateway device, and then add it according to the instruction in “Add

Device”.

Add device

Start the App, select the gateway to be connected, and click “Add Sub-device” in the

Device Interface; then follow the instructions of the App until it prompts that the

gateway is successfully connected.

* If adding failed, please move the gateway device closer to the Sensor and try again.

Installation

Verification of valid distance: after the Sensor is successfully added, press the Reset

button at the selected installation position, the gateway will prompt which means that

there is valid communication between the Sensor and the gateway.

PAGE 1
Aqara Product Manual SJCGQ11LM Introduction Aqara Water Leak Sensor is used to detect water leaking and flooding. It is able to give real-time alarm through App and control other smart hardware products via gateway devices, such as Mijia Multifunction Gateway. * This product must be connected to a gateway device in order to function.
PAGE 2
Method : place the Sensor on a required plane directly without using the paster; *The surface of the plane must be clean *Do not install on metal surface FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2.
PAGE 3
IC NOTICE TO CANADIAN USERS This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with RSS‐247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.