Owner’s Manual EC45S Tower Evaporative Cooler IMPORTANT SAFETY INFORMATION: Please carefully read this manual before attempting to install or use this tower evaporative cooler. For your safety, comply with all safety instructions and warnings contained in this owner’s manual to prevent personal injury or property damage. To view the full line of Luma Comfort products, please visit www.lumacomfort.com.
Contents Introduction ..................................................................................................................... 1 Product Benefits .............................................................................................................. 1 Important Safety Information ........................................................................................... 1 Parts List ..........................................................................................................
Introduction Thank you for purchasing this evaporative cooler from Luma Comfort, the world leader in home appliances and home comfort products. This owner’s manual provides specific operating instructions for your tower evaporative cooler. Use the evaporative cooler only as instructed in this owner’s manual.
Parts List 1. 2. 3. 4. 5. 6. 7. Control panel Display panel Remote control receiver Air louvers Water level indicator Caster Dustproof air filter 8. 9. 10. 11. 12. 13.
Operating Instructions Carefully remove all packaging materials and retain for future storage/use. Make sure there is no residual foam left in any of the components. No tools will be required to assemble this tower evaporative cooler. Filling the Water Tank a. Locate the water tank knob and turn it counterclockwise 90° to unlock the tank. Pull out the water tank from the back of the cooler. b. Fill the tank with clean water.
Using the Remote Control a. The Luma Comfort EC45S is equipped with a remote control. A CR2032 3V coin-type replacement battery is included for your convenience. b. To put the battery inside the remote control, insert a coin into the slot located on the back of the remote control and turn it as directed on the remote control. c. To use the remote control, aim it at the unit’s remote control receiver and select one of the functions on the remote control. The effective distance is approximately 24”. d.
ON/SPEED & OFF Buttons a. After the tank is filled with water, connect the tower evaporative cooler to a power outlet. The unit will beep twice, indicating that the power source is connected. The cooler will be in standby mode at this time. Press the ON/SPEED button to turn on the tower evaporative cooler. b. To adjust the fan speed, press the ON/SPEED button again until your desired speed has been reached. To turn the tower evaporative cooler off and revert back to standby mode, press the OFF button.
Maintenance Regular cleaning and maintenance is an essential step in maintaining the longevity of your tower evaporative cooler and ensuring that it operates free of defects. Maintain your evaporative cooler by following these steps: General Maintenance Instructions Always unplug the evaporative cooler from the power supply before servicing or cleaning. Use a soft cloth and a mild soap and warm water solution to clean the unit’s exterior. Do not use harsh cleaners, gasoline, paint thinner, benzene, etc.
Troubleshooting Problem There is no airflow. Possible Cause(s) The power cord is not plugged in. The water tank is not locked into the unit. The unit does not cool at all. There is insufficient water in the tank. The cooler/humidifier button was not pressed. The unit does not sufficiently cool. Water is coming out of the vents. The pump is defective. The cooling pad is not sufficiently saturated with water. The cooling pad may be clogged with debris.
Warranty Luma Comfort products are warranted to be free from defects in workmanship or materials for one (1) year from the date of purchase. If the product is found to be defective within this period, Luma Comfort, at its sole option, will repair or replace any components that fail during normal operation. The repairs or replacement will be made at no charge to the customer for parts and labor, assuming that the customer shall be responsible for all transportation costs to and from Luma Comfort.