SMARTMARKER
SMARTMARKER user guide Components color rings eraser cap accessory power/pairing button receiver mounting bracket new page Bluetooth mode button marker release receiver USB port smartmarker USB charge port charging case direct connect cable marker cap *Ferrite core : CU0930B 1
❶ Download and install Equil Note Equil Note Phone Tablet platform available on iOS the App Store Android™ Google Play™ Mac OS X® the App Store Windows support.myequil.com Computer Equil Note Record and organize written notes. Edit, enhance and share them with friends and colleagues. Convert your handwriting to text for easy editing and sharing. ❷ Charge your marker and receiver Make sure to fully charge Equil Smartmarker before use. Charging takes approximately two hours.
❸ Set Bluetooth Mode The Bluethooth mode button is found on the side of the receiver. The default mode is iOS. To pair with your iPhone/iPad/iPod, press the BT mode button to select iOS. To pair with your Android, Mac OS or Windows device, press the BT mode button to select “others”. To turn Bluetooth OFF, press and hold the BT button for 3 seconds. Whiteboard notes will be saved to internal memory. Import your notes next time you connnect to your device.
❹ Pair receiver with your device ❶ Turn the receiver off. ❷ Hold power button for 2 seconds until the Bluetooth LED blinks fast. ❸ Turn on Bluetooth for the device you are pairing and select your Equil Smartmarker in the devices list. ❹ When pairing is complete, the Bluetooth LED will start to blink slowly (approx. once every 2 seconds). 4 Tips View the Tutorial For more detailed pairing info for your specific device, refer to the Equil Note software tutorial.
❺ Place receiver on your whiteboard Metal Whiteboards All Other Surfaces ❶ Attach adhesive bracket to receiver ❷ Remove protective backing ❸ Place receiver on surface, press firmly for best adhesion whiteboard surface Position the receiver at either side of your writing area, centered vertically. up to 5’ high (1.52m) up to 8’ wide (2.44m) up to 8’ wide (2.44m) left side right side no-draw zone 5 Tips Position the receiver where it will be convenient to press the new-page button.
❻ Install the dry-erase marker Open the marker barrel Change the color ring if desired Insert the corresponding dry erase marker Tips When your smartmarker battery is running low, the amber LED will blink 5 times when you turn it on to remind you to recharge soon. The smartmarker has no power button. It will to prevent the marker from drying out. The marker color in the software is determined by the color ring used on the smartmarker, regardless of what color marker is placed inside.
Tips 7 Install the eraser battery Open the battery cover – Install battery, negative side up + replace battery cover Slide downward and remove 8 Install eraser “parking spot” remove adhesive backing place bracket horizontally on surface 7 When your eraser battery is running low, the amber LED will blink 5 times when you turn it on to remind you to recharge soon. The eraser has no power button. It will The eraser can be “parked” on a metal whiteboard surface.
Finished! Tips Now you can start recording whiteboard notes directly to your smart phone, tablet or computer! Learn about all of the great features of Equil Smartmarker through the tutorials and user guide included with the Equil Note App. You can also take notes without your phone, tablet or computer. All of your strokes will be saved in memory, and you can sync them back to your device when its convenient.
Recording notes to memory When recording notes directly to the receiver memory, there are a few helpful indicators that appear around the New Page Button.
Using the Eraser Cap The eraser cap is an accessory that lets you make small corrections to your whiteboard notes as you are drawing. The eraser cap only works in its capped position on the smartmarker. Do not erase with it when placed in your hand or on the back of the smartmarker.
Using the charging case on the marker board surface You may attach the charging case to your whiteboard surface if you prefer to keep the receiver plugged in instead of using its battery power. The charging case also provides a handy place to store the smartmarker, and keeps it charged and ready for use. Use the provided 10 foot (3 meter) USB cable and the USB power adapter to plug the case into the nearest electrical outlet.
Thank you Merci Gracias Vielen Dank Grazie ありがとうございます。 谢谢! 謝謝! www.myequil.com support.myequil.com facebook.com/equil twitter.
FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Designed in California by Luidia Inc. Manufactured in Korea by PNF Co., Ltd. “Made for iPod,” “Made for iPhone,” and “Made for iPad” indicates an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.