User Manual

Catalog
1.Overview
2.Precautions
3.Main function
4.Main components
5.Accessories instructions
1.Overview
This product is specially designed and developed for the fishing
enthusiasts and the professional fishery operation through using
advanced science and technology. The use of this product can find
an d o b se r v e t h e p o sition an d t he direc tion of movem ent of the
un derwa ter sh oal of fish, and ju dge the sp ecies , s ize an d the
number of the fish through the display device, and also can observe
the position and the situation of fish bite.
Therefore, this product is the most ideal assistant for fishing, and it
also can help you to catch more fish easily.
2.Precautions
1.) Firstly, it is necessary to charge the built-in lithium battery for more
than 8 hours before using this machine for the first time.
2.) Do not remove the monitor of the host machine at will, so as to
avoid the accidents and cause the loss by human error.
3.) Make sure that the plug of the camera has been reliably plugged
into the corresponding plug of the host monitor, and then switch on
the supply power of the monitor.
3.Main function
1.) The camera adopts the high-definition camera module with 1/4
inch and 300,000 pixels to take image; the image is clea r, and the
color reproduction is real and verisimilar. The low-level lighting of
the camera is 0.1 LUX, and the resolution reaches up to 420 TV Line.
T h e c a m e r a c o m b i n e s w i t h f o u r f a r- i nf r a r ed L ED l i g ht s ; t h i s
combination can guarantee to observe the dynamic trend of the
underwater shoal of fish in extremely dark underwater environment.
The power cord is made from the special imported materials which
are extremely soft and have high tensile strength. Although the wire
diameter is only 2 mm, but it can resist the tensile force above
15 kgs.
4.Main components
1.Monitor
(1) Handheld monitor
(2)
Left Button
(5)
(6) Enter Key
Mode Menu
(3)
(4) Menu button
Right Button
5. Accessories instructions
1.Name of main parts
1).Camera lens
2).LED infrared LED
3).The principal part of camera
4).Profile holder
5).Camera neck
6).Central ring
7).Central ring solt
NOTE：Please ensure that central
ring fixed in the camera card slot
(see chart).
Please install the profile holder to the camera principal slot, an d load
th e c amera line into the profile holder, then carry out the transverse
detection.
6.Operation Instruction
1.) Pl ease turn o n the orange swi tch at the back of the monitor
fi rstl y b efore u sing this machi ne. Pre ss th e O N button once, th e
sw itch will b e o n, and pre ss ag ain, the switch will be off. Such
repeated operation is the switching program for this machine. Only this
switch is on, the monitor can be started. If this machine does not in
use for long a time, please turn off this switch. In this way, it can avoid
the loss of the battery power. Then press the power on/off , the
monitor will be turned on.
2.) Th en plug th e p l u g o f the camera into the socket on the back of
the monitor, and please make sure that the plug has been
plugged properly.
3.) After the power supply is on, the monitor will show the real-time
picture of the image.
6.Operating instructions
7.Main technical specifications
8.Standard configuration table
9.Safety information
10.Maintenance and service
10.Specification
7.Standard configuration table
Name
handheld monitor
underwater camera
the lateral detecting bracket of the camera
instruction
warranty card
bracket for rod
SD card
Quantity
one piece
one set
one volume
one volume
one piece
one piece
one piece
8.Safety information
1.) Please don't use this machine in high temperature, bring light
and strong electromagnetic field, etc.
2.) Please turn off the machine before entering into the place where
the explosion will occur easily due to the potential factors. In these
places, please do not remove, install the battery and or charge the
battery. In such environments where the explosion may occur, the
sparks may cause an explosion or fire, and cause the personal injury
or deaths.
Note: The above-mentioned places where the explosion may occur
sh o ul d in c lu d e: f ue l a r e a ( s u c h as : un d e r the ship’s dec k ,
transportation and storage facilities of the fuel or the chemicals), the
places where chemical substances and particles spread in the air
(such as: particle, dust or metal powder). The places where the
explosion hazard may exist will be marked usually, but not all the
places are marked by these signs.
3.) Please keep the machine and charger in the place where the
children can’t reach, and the rubber plug of the host machine and
other accessories may cause asphyxia due to the blockage of trachea.
4.) For your safety, please use the original charger.
9.Maintenance and service
1.)Monitor
(1)Although the machine has high waterproof grade, but for the sake
of safety, please keep the machine dry. The rain, moisture and liquid
contain many minerals, and will cause the circuit corrosion of the
machine.
(2)Please do not keep the machine in dirty and dusty place.
(3)Please do not use or keep the machine in high temperature. The
high temperature will shorten the service life of the electronic
components, damage the battery, and deform or melt some plastic parts.
2.) The monitor adopts 4.3 inch TFT color LCD screen.
The monitor has the function of recording, photos-taking, video
playback, and viewing pictures, and connecting to computer to copy
videos and pictures, and also has 9 Languages to choose from: English,
Chinese, Japanese, Русский, Korean,español, Deutsch, Italian,
French
(4) Do not use or keep this machine in the super cooled place. When
the machine is in normal temperature, the moisture will condense
within the machine, and cause the damage to the circuit board.
(5) Do not disass emble the machine at your own disc r etion; the
nonprofessional treatment may damage the machine. When the
machine breaks down, please connect with LUCKY dealers or
the salesmen for the after-sales service.
(6) Please avoid falling off, beating and vibrating the machine; the
inappropriate external force will bring about the damage to the circuit
and LCD monitor within the machine.
(7) Do not use the chemical solvents or cleaning agents to clean the
machine. If you want to clean the machine, please use the soft cotton
fabrics with the water or neutral soap to wipe the machine casing
gently. Please be sure to pull out all the cables when cleaning the
machine.
(8) Do not use the painting to paint the machine. The pigment may
block the machine components, and affect the normal operation
accordingly.
2.)Built-in lithium battery
(1) The lithium batteries can be charged and discharged for
hundreds of times, but will fail eventually. When the battery life is
significantly shortened, it is necessary for you to purchase and
replace the new battery.
(2) When the charger isn’t in use, please pull out from the power
socket outlet. Please don't connect the fully-charged machine with
the charger for a long time, because the overcharge will shorten
the battery life.
(3) After the battery power is used out, the machine will switch off
automatically. Please note to charge in time.
(4) In battery charging, due to the battery temperature will rise,
please do not put the machine together with the inflammables
profile holder
Underwater Fishing Camera
FL180AR Manual Guide
5
4
7
6
1
2
3
http://www.goodluckycn.com
ENTER
MODE
1) Display: 4.3 Inch LCD
2) Used for fishing, diving, swimming and other outdoor sports
3) 4 IR LED lights design, providing a wider underwater vision range
4) Visible Angle: 120 degrees
6) Max cable length: 20M
7) Power: 3.7V rechargeable lithium batteries
8) Operational Temperature: 14°F to 122°F(-10°C to 50°C)
(7)
(8) Main Switch
(9) Charger socket
(10)
(11) Slot for SD card
(12) Place for stand
Power ON/OFF
Camera socket
2.Function setting
(1) Menu Settings --- MENU button: Press the MENU button in photographing
or video recording mode to enter the menu settings. The menu settings
include format, language, default setting, and date.
(2) Mode --- MODE menu: Each time the MODE key is pressed, it is a cycle
conversion among three modes of photographing, video recording and file
browsing.
(3) Confirmation ENTER key: In photographing mode, every time the
ENTER key presses， it will take a photo; in video recording mode, press
the ENTER key once to start recording, and then press it again to stop
recording and save it, and then the same cycle of operation.
(4) Left button: In file browsing mode, press once to scroll forward; When
setting menu, press once to select upward.
(5) Right button: In file browsing mode, press once to scroll backward;
When setting menu, press once to select downward.
---
5.) Please use the charger indoors, do not keep the charger in the
place easy access to water, such as the windowsill.
6.) The charger is non-waterproof, please don't keep and use it in
too moist places, such as the kitchen and bathroom; or don’ t keep
and use it in the places where the corrosive gases occur. Otherwise,
it may cause the electric shock, explosion or burning accident.
7.) If the machine is unused for a long time, it may not start smoothly,
please start again after charging for a period of time.
8.) Please don't operate the machine continuously for a long time in
the strong sunlight. In this case, it will bring about the damage to the
liquid crystal. It is better to use the machine in 50 degree ambient
temperature or no less than -10 ℃
1
2 3
4
5 6
7
8
9
10
11
12
SD card
Bracket for rod
(such as: the head of a bed, clothes and books, etc.), so as to avoid
catching fire. In battery charging, please keep the machine in the
open space, not allow to be covered.
(5) Do not put the machine into the fire, or put it in extremely hot
place, in case of the battery explosion.
(6) In order to prolong the service life of the machine battery, please
keep the battery power in full state. When it isn’t in use, please
wrap the machine with the non-conducting materials after charging
the machine (in half-full state), and put it in a cool, dry and dark
place. The storage time is no more than a month. A month later,
please recharge it.
(7) If the power line or the socket of the charger has worn or damage;
the charger is caught in the rain or dampened seriously; the charger
case is broken; you want to clean the charger; as long as one of the
above-mentioned situations occur, please pull out the charger plug
immediately.