Espresso maker Design Luca Trazzi Instructions manual
x4 I M P O RTA N T S A F E G U A R D S IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1 Read all instructions. 2 Do not touch hot surfaces. Use handles or knobs. 3 To protect against fire, electric shock and injury to persons do not immerse cord, plugs or machine in water or other liquid. 4 Close supervision is necessary when any appliance is used by or near children.
x4 GE N E RAL I N FORMATIONS x4 SHORT INSTRUCTIONS General information for using the unit Short instructions We recommend that the grill (9), the drip tray (7), the water tank (11), the steam nozzle and air intake opening (8) are cleaned regularly. EXTREMELY IMPORTANT: never immerse the appliance in water or clean in a dishwasher. The contents of the water tank (11) should be changed regularly. After changing water, ensure that the suction hose (14) reaches into the inside of the water tank (11).
x4 STEAM AN D WATE R x4 CAPPUCCINO Steam Preparing one or several cappuccinos The X4 can generate steam or hot water for the preparation of cappuccino or tea. In order to generate steam, the TEMPERATURE must appear on the display. Press the steam button (4). IMPORTANT: PLEASE FOLLOW THE DESCRIBED INSTRUCTIONS AND SEQUENCE EXACTLY! The cup symbol will disappear from the display and the steam symbol will appear. The machine will now automatically increase its operating temperature.
x4 TIME x4 Programming the X4 PROGRAMMING Programming the switch on / switch off function (P1,P2,P3) The X4 allows the following functions to be programmed: Clock time Sleep/active modes Temperature at which coffee is prepared Duration of coffee preparation This function allows you to program three active periods for the machine throughout the day (P1, P2 and P3). On the display, you will see “L’ORA” (TIME).
x4 TE MPE RATU R E x4 EXTRACTION TIME To program P2 and P3, press button (2) and proceed in the same manner as described for P1. In order to deactivate the programming, the CLOCK TIME must be visible on the display. Press button (3). Select the programme that you wish to deactivate and then press button (4). The display will now show the programmed clock time. The word ‘PROGRAM’ will disappear.
x4 T E C H N I C A L DATA If ALL is displayed If the internal temperature of the boiler will exceed 138°C (i.e. before temperature safety activation) and the flashing word ‘ALL’ will appear on the display. No additional functions can now be used. As soon as the temperature falls to its normal level, the ‘ALL’ word will disappear and the machine will once again become operational. Technical Data IMPORTANT! Only connect your espresso machine to a standard socket.