Network Indoor Station Quick Start Guide
Network Indoor Quick Start Guide Legal Quick Start Guide ©2019 LT Security Inc. About this Manual This Manual is subject to and copyright LT Security Inc.("LTS") reserves all rights to this manual. This manual cannot be reproduced, changed, translated, or distribut y, by an Please use this user manual under the guidance of professionals.
Network Indoor Quick Start Guide TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, LTS WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW.
Network Indoor Station Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Network Indoor Station Quick Start Guide EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/ 65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union.
Network Indoor Station Quick Start Guide 1. l'appareil ne doit pas produire de brouillage, et 2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.
Network Indoor Station Quick Start Guide Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Danger Caution Note Description Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
Network Indoor Station Quick Start Guide Safety Instruction Warning • The working temperature of the device is from -10 ºC to 55 ºC. • All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other related regulations in your local region. • Please use the power adapter, which is provided by normal company. The power consumption cannot be less than the required value.
Network Indoor Station Quick Start Guide • Please use the provided glove when open up the device cover, avoid direct contact with the device cover, because the acidic sweat of the fingers may erode the surface coating of the device cover. • Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents. • Please keep all wrappers after unpack them for future use.
Network Indoor Station Quick Start Guide Contents 1 Getting Started ........................................................................................... 1 1.1 Activate Indoor Station ..................................................................................... 1 1.2 Quick Operation ................................................................................................
Network Indoor Station Quick Start Guide 1 Getting Started 1.1 Activate Indoor Station You can only configure and operate the indoor station after creating a password for the device activation. Steps 1. Power on the device. It will enter the activation page automatically. 2. Create a password and confirm it. 3. Tap OK to activate the indoor station.
Network Indoor Station Quick Start Guide Figure 1-3 Network Parameters 3. Configure the indoor station. 1) Choose Indoor Station Type. 2) Edit Floor and Room No. 3) Tap Next. Figure 1-4 Indoor Station Settings 4. Linked related devices and tap Next. If the device and the indoor station are in the same LAN, the device will be displayed in the list. Tap the device or enter the serial No. to link.
Network Indoor Station Quick Start Guide Figure 1-5 Related Device 1) Tap the door station in the list to link. Note If the door station is inactive, the system will pop up the dialog to activate the door station. 2) Tap to pop up the Network Settings page. 3) Edit the network parameters of the door station manually or enable DHCP to get the network parameters automatically. 4) Optional: Enable Synchronize Language to synchronize the time of door station with indoor station.