c o DIB-N800 Series DIB-N810 / DIB-N830 / DIB-N850 DIB-N810R / DIB-N830R / DIB-N850R User’s Manual This manual contains the warranty card. Please read this manual carefully before use.
Table of Contents 01 General Information Safety Information - Warning 4 Safety Information - Caution 6 Product Features 8 Product parts 02 Please save this manual and place in easily accessible location. 10 Installation Before Installation 14 Product Installation 15 Remote Installation 17 Trial Operation 18 Do not attempt to service this appliance yourself. Doing so will void warranty.
Safety Features Warning Safety Information Caution Risk of electric shock, fire, personal injury, property damage or products damage when violating the instructions. Risk of electric shock, fire, personal injury, property damage or products damage when violating the instructions. Do not disassemble, modify or repair the product yourself. Do not stand on the top of or place any heavy objects onto the seat cover. Do not plug or touch the power plug with wet hands.
Safety Features Warning Safety Information Caution Risk of electric shock, fire, personal injury, property damage or products damage when violating the instructions. Risk of electric shock, fire, personal injury, property damage or products damage when violating the instructions. TURBO Water filter Remove the water in the rectum after using Turbo function, or you may feel bloated or uncomfortable.
Products Features Ceramic water heating technology Product Features c o 2 Energy Saving modes Instant ceramic heating system provides an endless water washes. Offers 2 different energy-saving modes to maximize the electricity saving. Touch control panel 2 Nozzle Cleansing modes By applying the touch control panel with perfect waterproofness equivalent to IPX8, this can be used conveniently without worrying about malfunction even in high temperature and high humidity environments.
Product parts Control panel User presets 1 5 11 2 3 10 8 Turbo (enema) 7 4 Rear wash Rear wash oscillation 2X rear wash mode Front wash Front wash oscillation 2X front wash mode 9 6 Stop Dry 1 Lid 2 Control panel 3 Nozzle 4 Seat 5 Release lever 6 Deodorizing cover and air outlet 7 Intake deodorizing hole 8 Catch plate 9 Water inlet 10 Night light 11 Power cord Water pressure/ Dry temperature control Nozzle position control Child wash Installation parts Pulsation Seat temperatur
Product parts Control panel User presets 1 Rear wash Rear wash oscillation 2X rear wash mode 5 Front wash Front wash oscillation 2X front wash mode Water pressure/ Dry temperature control Nozzle position control 11 Child wash Turbo (enema) Water temperature control Seat temperature control Stop 9 6 8 8 2 4 3 10 7 Dry Nozzle cleansing Pulsation Engergy saving 1 Lid 2 Auxiliary panel 3 Nozzle 4 Seat 5 Release lever 6 Deodorizing cover and air outlet 7 Intake deodorizing hole 8 Catch
Before installation Caution Do not plug the product in until the unit is completely installed. Product Installation 1. Remove the seat from the existing toilet Release the nuts and then remove the seat and cover. Keep the removed seat, cover and nuts in a a proper place in case of using them again. Read the manual first before installation.
Product Installation 비데 설치방법 Remote Installation 6. Attach the bidet seat to the catch plate 1. Find a place visible and reachable from the toilet and clean the space thoroughly before attaching the bracket. Adjust the seat and front part of the toilet back and forth so that they can correspond before fastening the bolts. Set the bidet seat flat on the toilet bowl and push it in until it clicks into place and is secure. Failure to do may cause the seat to come apart. 7.
Trial Operation 1. Turn on the water supply Make sure the flush tank is filled up with water. 2. Check all connections for leaks, including T-valve and hose connections In case of leakage, check the tightening of the nut and whether the rubber washer is missing or twisted, and Teflon tape may be required depending on the installation environment. Operations Occupied seat sensor (getting started) Sit on the seat to ensure skin contact on the seat sensor.
Operations Operations 2X mode If the stronger water pressure is preferred while a rear/ front wash, select and hold a button for 3 seconds to change to 2X mode. 2X mode starts from Level 3 regardless previous setting. Select and hold a rear/front wash button for 3 seconds to initiate 2X mode rear/front wash. Select once again to initiate nozzle oscillation. To cancel the oscillation, select again. To cancel 2X mode, select and hold a rear/front wash button for 3 seconds.
Operations Operations Energy saving Nozzle cleaning There are two ways to initiate nozzle cleaning. Select the Energy saving button once to initiate the Energy saving mode 1. Select it again to initiate the Energy saving mode 2. To cancel the Energy saving mode, select it once again after the Energy saving mode 2. Nozzle cleaning 1 (nozzle body care) Select Nozzle cleaning for a second while not seated. Nozzle extends toward and self-clean 3 times with cold water. It retracts when finished.
Expert mode 기본기능mode Expert Expert mode allows the user to program the operations. It may be complicated for regular users. Entering & canceling Expert mode Select and hold Nozzle Cleaning for 2 seconds while Stop is selected and held to enter/cancel the expert mode. Nozzle Cleaning LED blinks to indicate Expert mode has been entered. The seat sensor is automatically overridden and, if the overriding is not canceled forcibly, it is canceled after 20 minutes automatically.
Expert mode 기본기능mode Expert Automatic deodorize on/off Water pressure and nozzle position change This feature can be set regardless seat sensor override. Activate the seat sensor override Select Water temperature while Stop is selected and held to initiate/cancel the automatic deodorize.
Maintenance ※ Dual protection (dryer inner cover and closed nozzle cover) protects the bidet seat from contamination and water damage. Cleaning the screen filter Turn off the water supply and hold the toilet flush lever down to empty the tank completely. Unplug the bidet seat, remove from the toilet and disconnect the bidet hose. You may use the bucket to catch any dripping water from the hose and bidet seat. Remove the screen filter from the water inlet with a long-nosed pliers.
Error code Specification ※ In the event of an abnormality, please refer to the error code table below and inform us at the time of receiving repair service, so that the action may be easier. Remote model Common display Left Right No. Power voltage AC 220V / 60Hz Max power consumption 1,430W Power cord 1.
Comparison Chart Remote control Specifications Feature Product name RF remote control for an electronic bidet seat Model name DIB-LT1-RF Frequency band 2440 Mhz DIB-N810 DIB-N830 DIB-N850 DIB-N810R DIB-N830R DIB-N850R Rear wash Front wash Turbo (Enema) Child wash Wash Pulsation Modulation type OQPSK Antenna type Internal antenna Power supply DC 3V (CR2032 Battery 2EA) Aerated wash Wireless type Zigbee Built in pump Product size 66mm X 155mm X 10mm Product weight 105 g Dry Oscill
Dimension WARRANTY Side arm model 449mm 280mm 528mm 200mm 300mm 380mm 200mm 500mm [ Round ] 380mm 99mm 112mm 500mm [ Elongated ] 99mm 112mm 449mm Remote model [ Elongated ] [ Round ] 200mm 280mm 528mm 380mm 200mm 300mm 380mm 155mm 10mm 66mm 34 35
Federal Communications Commission Statement CE Marking This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation.
ver.2207 www.lsdaewon.co.
