ANTHEM SL INSTALLATION MANUAL TM
1.PACKAGE CONTENTS One Anthem-SL with TRU•MIC, Element pickup, endpin preamp, volume control and battery lead __ pre-assembeled One battery bag Six self-stick wire clips Two adhesive pads for volume control One extra adhesive set for Tru • Mic 2. OVERVIEW AND CAUTIONS The Anthem SL Classical features our patent pending TRU•MIC microphone technology.
Preparing the saddle You will need to compensate for the thickness of the pickup in the overall height of the saddle by removing approximately .032” of saddle material. We recommend you do this from the bottom of the saddle. This will allow you to make sure the bottom of the saddle is absolutely flat while maintaining intonation/compensation on the topside. Remove the majority of the material on a belt sander first.
fig. 4a without bridgeplate fig. 4b with bridgeplate 6. BATTERY BAG PLACEMENT Stick the double-sided adhesive to an easily accessible spot on the back, side or neck block. Insert the battery and battery snap into the bag. The battery can then be changed by opening the flap on the bag and pulling out the battery. 7. MOUNTING THE CONTROL Attach the adhesive pad to the volume control. Remove the protective backing from the adhesive pad and mount the control in a convenient place on the rim of the soundhole.