SDS

ManualsBrandsLP Specialty ManualsBuilding materialsLP® SolidStart® LSL 2 x 4 x 16' Laminated Strand Lumber

Preparation Date: 24/July/2017 Page 1 of 20 Format: EU CLP/REACH Language: English (US)

Revision Date: 30/November/2017 EU CLP, OSHA HCS 2012, WHMIS 2015

Safety Data Sheet

Section 1: Identification of the Substance/Mixture and of the Company/Undertaking

1.1 Product identifier

Product Name

•

LP Engineered Wood Products

1.2 Relevant identified uses of the substance or mixture and uses advised against

Relevant identified use(s)

•

Various engineered wood building products for wall, roof, or floor components;

structural or nonstructural construction components; industrial applications.

This SDS applies to all of LP’s wood products except those with

fire retardant coatings.

1.3 Details of the supplier of the safety data sheet

Manufacturer

•

Louisiana-Pacific Corporation

414 Union Street, Suite 2000

Nashville, TN 37219

United States

www.lpcorp.com

Telephone (General)

•

877-744-5600

1.4 Emergency telephone number

Manufacturer

•

615-986-5600

Section 2: Hazards Identification

This product is not hazardous in the form in which it is shipped by the

manufacturer but health and/or physical hazards may be created

by downstream

activities (e.g., cutting, sanding, milling) that reduce its particle size. Those

downstream hazards are described below.

EU/EEC

According to: Regulation (EC) No 1272/2008 (CLP)/REACH 1907/2006 [amended by 2015/830]

2.1 Classification of the substance or mixture

CLP

•

Skin Sensitization 1 - H317

Respiratory Sensitization 1 - H334

Specific Target Organ Toxicity Single Exposure 3: Respiratory Tract Irritation - H335

Carcinogenicity 1A - H350

2.2 Label Elements

CLP

DANGER

Summary of content (20 pages)

PAGE 1
Safety Data Sheet Section 1: Identification of the Substance/Mixture and of the Company/Undertaking 1.1 Product identifier • LP Engineered Wood Products Product Name 1.2 Relevant identified uses of the substance or mixture and uses advised against Relevant identified use(s) • Various engineered wood building products for wall, roof, or floor components; structural or nonstructural construction components; industrial applications.
PAGE 2
Hazard statements • H317 - May cause an allergic skin reaction H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled H335 - May cause respiratory irritation H350 - May cause cancer. Precautionary statements Prevention • P202 - Do not handle until all safety precautions have been read and understood. P261 - Avoid breathing dust. P271 - Use (saw, sand, etc.) only outdoors or in a well-ventilated area. P280 - Wear protective gloves/protective clothing/eye protection/face protection.
PAGE 3
Prevention • Do not handle until all safety precautions have been read and understood. Avoid breathing dust. Use (saw, sand, etc.) only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection/face protection. In case of inadequate ventilation wear respiratory protection. Response • IF INHALED: Remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician.
PAGE 4
in a protected location. Dispose of waste material in accordance with local, regional and national regulations. Section 3 - Composition/Information on Ingredients 3.1 Substances • Material does not meet the criteria of a substance in accordance with Regulation (EC) No 1272/2008. 3.2 Mixtures Composition Chemical Name Wood (may include fiber, strands, or veneer) Identifiers NDA Classifications According to Regulation/Directive EU CLP: Skin Sens. 1, H317; Resp. Sens. 1, H334; STOT SE 3: Resp. Irrit.
PAGE 5
Section 4 - First Aid Measures 4.1 Description of first aid measures Inhalation Skin Eye Ingestion • IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Give artificial respiration if victim is not breathing. If signs/symptoms continue, get medical attention. • In case of contact with substance, wash with plenty of soap and water. If irritation develops and persists, get medical attention.
PAGE 6
explosive mixture if they are released into the atmosphere in sufficient concentration. Sweep up carefully to avoid generating airborne dust or use vacuum rated for use with combustible dust. Place recovered wood dust in a container for proper disposal. 6.4 Reference to other sections • Refer to Section 8 - Exposure Controls/Personal Protection and Section 13 - Disposal Considerations. Section 7 - Handling and Storage 7.1 Precautions for safe handling Handling • Minimize dust generation and accumulation.
PAGE 7
Wax (paraffin, slack, emulsion) (8002-74-2) TWAs 2 mg/m3 TWA (fume) STELs Not established TWAs Boric Acid, Zinc Salt 3 mg/m3 TWA (particulate matter containing no Asbestos and <1% Crystalline silica, respirable fraction); 10 mg/m3 TWA (particulate matter containing no Asbestos and <1% Crystalline silica, inhalable fraction) as Particulates not otherwise classified (PNOC) 2 mg/m3 TWA 2 mg/m3 TWA (fume) 2 mg/m3 TWA 2 mg/m3 TWA (fume) 4 mg/m3 STEL Not established 4 mg/m3 STEL Not established 10 m
PAGE 8
TWAs 10 mg/m3 TWAEV (including dust, inert or nuisance particulates; containing no Asbestos and <1% Crystalline silica, total dust) fraction); 6 mg/m3 STEL (insoluble or poorly soluble, respirable fraction) substances; use PCSTEL of silica When free SiO2 >10%, total) as Particulates not otherwise classified (PNOC) as Particulates not otherwise classified (PNOC) 10 mg/m3 TWA (insoluble or poorly soluble, inhalable fraction); 3 mg/m3 TWA (insoluble or poorly soluble, respirable fraction) 8 mg/m3 TWA (f
PAGE 9
limit); 5 mg/m3 TWA crystalline silica, [VME] (restrictive Serial No. 717) limit) as Particulates not as Particulates not otherwise classified otherwise classified (PNOC) (PNOC) PhenolFormaldehyde Resin Solids (9003-35-4) TWAs Wood (may TWAs include fiber, strands, or veneer) 5.0 mg/m3 TWA (dust) Not established Not established Not established 10 mg/m3 TWA [VME] (restrictive limit); 5 mg/m3 TWA [VME] (restrictive 10 mg/m3 TWA (no limit) more than 1% crystalline silica, as Particulates not Serial No.
PAGE 10
fraction); 50 mppcf TWA (total dust); 15 mg/m3 TWA (total dust)) ACGIH •Wax (paraffin, slack, emulsion) (8002-74-2): TLV Basis - Critical Effects: (nausea (fume); upper respiratory tract irritation (fume)) 8.2 Exposure controls • Ensure that dust handling systems (such as exhaust ducts, dust collectors, vessels and processing equipment) are designed in a manner to prevent the escape of dust into the work area (i.e., there is not leakage from the equipment).
PAGE 11
Environmental Octanol/Water Partition coefficient Data lacking 9.2 Other Information • No additional physical and chemical parameters noted. Section 10: Stability and Reactivity 10.1 Reactivity • No dangerous reaction known under conditions of normal use. 10.2 Chemical stability • Stable under normal temperatures and pressures. 10.3 Possibility of hazardous reactions • Hazardous polymerization will not occur. 10.
PAGE 12
Carcinogenicity EU/CLP•Carcinogenicity 1 OSHA HCS 2012•Carcinogenicity 1A WHMIS 2015•Data lacking Germ Cell Mutagenicity EU/CLP•Data lacking OSHA HCS 2012•Data lacking WHMIS 2015•Data lacking Toxicity for Reproduction EU/CLP•Data lacking OSHA HCS 2012•Data lacking WHMIS 2015•Data lacking STOT-SE EU/CLP•Specific Target Organ Toxicity Single Exposure 3: Respiratory Tract Irritation OSHA HCS 2012•Specific Target Organ Toxicity Single Exposure 3: Respiratory Tract Irritation WHMIS 2015•Data lacking STOT
PAGE 13
Section 12 - Ecological Information 12.1 Toxicity • Material data lacking. 12.2 Persistence and degradability • Material data lacking. 12.3 Bioaccumulative potential • Material data lacking. 12.4 Mobility in Soil • Material data lacking. 12.5 Results of PBT and vPvB assessment • PBT and vPvB assessment has not been carried out. 12.6 Other adverse effects • Material data lacking. Section 13 - Disposal Considerations 13.
PAGE 14
Boric Acid, Zinc Salt 138265-88No 0 No No Imidacloprid 138261-41No 3 No No MelamineFormaldehyde Resin Solids 25036-139 No No No Wax (paraffin, slack, emulsion) 8002-74-2 Yes Yes Yes PhenolFormaldehyde Resin Solids 9003-35-4 No No No Polymerized linseed oil 67746-081 No No No No Yes No Wood (may NDA include fiber, strands, or veneer) Inventory Component Aluminum sulfate (2:3) CAS 10043-013 Bifenthrin 82657-043 Australia AICS Canada DSL Canada NDSL China EU EINECS Yes
PAGE 15
Polymerized linseed oil 67746-081 Wood (may include fiber, NDA strands, or veneer) No Yes Yes Yes Yes No No No No No Australia Labor Australia - Work Health and Safety Regulations - Hazardous Chemicals Requiring Health Monitoring No ingredients subject to this requirement. Australia - High Volume Industrial Chemicals List No ingredients subject to this requirement.
PAGE 16
Canada - CEPA - Schedule III Part 2 - Export Control List - Substances Subject to Notification or Consent No ingredients subject to this requirement. Canada - CEPA - Schedule III Part 3 - Export Control List - Restricted Substances No ingredients subject to this requirement. Canada Alberta Environment Canada - Alberta - Ambient Air Quality Objectives No ingredients subject to this requirement. Canada - Alberta - Ambient Air Quality Guidelines No ingredients subject to this requirement.
PAGE 17
Environment Canada - Saskatchewan - Dangerous Goods - Acute Hazardous Substances No ingredients subject to this requirement. Canada - Saskatchewan - Dangerous Goods - Environmental Persistent or Chronic Hazardous Substances No ingredients subject to this requirement. Canada - Saskatchewan - Dangerous Goods - Industrial Hazardous Substances No ingredients subject to this requirement.
PAGE 18
Japan - Air Pollution Control Law - Emission Standards for Air Pollutants No ingredients subject to this requirement. Japan - Environmental Quality Standards - Annual Air Quality No ingredients subject to this requirement. Japan - Environmental Quality Standards - Daily Air Quality No ingredients subject to this requirement. Japan - Environmental Quality Standards - Soil Pollution No ingredients subject to this requirement.
PAGE 19
United Kingdom Other United Kingdom - Workplace Exposure Limits (WELs) - Substances in Review No ingredients subject to this requirement. United States Labor U.S. - OSHA - Process Safety Management - Highly Hazardous Chemicals No ingredients subject to this requirement. U.S. - OSHA - Specifically Regulated Chemicals No ingredients subject to this requirement. Environment U.S. - CAA (Clean Air Act) - 1990 Hazardous Air Pollutants No ingredients subject to this requirement. U.S.
PAGE 20
Disclaimer/Statement of Liability • This SDS is intended solely for safety education and not for use as specifications or warranties. The information in this SDS was obtained from usually reliable sources and is provided without any representation for warranties regarding the accuracy or correctness. Since the handling, use, and storage is beyond our control, LP assumes no responsibility and disclaims liability for any loss, damage, or expense arising therefrom.