PREMIUM BRIEFCASE TURNTABLE Model: LPSC-012 User Manual
BEFORE USE 1. Choose a safe location and avoid placing the unit in direct sunlight or near any heat source. 2. Avoid locations subject to vibrations, excessive dust, cold or moisture. 3. Do not open the cabinet as this may result in electrical shock. If a foreign object is inserted accidentally contact your dealer. 4. When removing the power plug from the wall outlet, pull directly on the plug, NOT the cord. 5. Do not attempt to clean the unit with chemical solvents as this might damage the finishing.
8. Headphones jack —to connect headphones or earphones to enjoy music privately 9. Platter – Place your record here. 10. Tone arm – The turntable comes with a ready to use pre-balanced tone arm and cartridge. The tone arm can be raised and lowered by hand, or by using the raise / lower lever. Please note that the tone arm needs to be moved away from resting position (on the arm clip) for the turntable motor to activate if auto stop is activated. 11. Cartridge 12. Tone arm clip 13.
Plug your USB stick into the USB port. During the vinyl records playback, press the REC button and the indicator will flash red and blue alternatively. The vinyl recording starts. Press SPLIT button when recording, the current record will be cut off and automatically stored in a file. Press SPLIT button again will generate another file. Press the REC button to stop the recording. The indicator will becomes red During recording, the recorded files will be saved in the USB stick. AUX IN MODE 1.
MUSIC playback on your own speaker system 1. Connect your own speaker system to the RCA port with a RCA-3.5mm audio cable (not included). 2. You can enjoy the music of the vinyl records at your own speaker system. How to Replace the Turntable Stylus (Needle) Removing the Stylus from the Cartridge 1. Place a screwdriver at the tip of the stylus and push downward as shown in direction “A”. 2. Remove the stylus by pulling the stylus forward and pushing downward. Installing the Stylus 1.
3. Frequently clean the needle tip-use a soft brush in a “back-to-front’motion only. 4. If you must use a needle cleaning fluid, use very sparingly. 5. Gently wipe the dust cover and turntable housing with a soft cloth. Use only a small amount of mild detergent to clean the turntable and dust cover. 6. Never apply harsh chemicals or solvents to any part of the turntable system.