VINTAGE TURNTABLE Model: LPSC-002
User Manual BEFORE USE 1. Choose a safe location and avoid placing the unit in direct sunlight or near any heat source. 2. Avoid locations subject to vibrations, excessive dust, cold or moisture. 3. Do not open the cabinet as this may result in electrical shock. If a foreign object is inserted accidentally contact your dealer. 4. Do not attempt to clean the unit with chemical solvents as this might damage the finishing. A clean, 5. Keep this manual for future reference.
. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Lift lever 33 / 45/78 RPM switch – This switch controls the RPM of the turntable platter. AUTO STOP ON/OFF switch Ceramic cartridge Platter – Place your record here. Please use the 45 RPM adapter, if the spindle is the incorrect size. Spindle Power on/off and volume control knob Headphone jack Port to connect power adaptor RCA output – Use to connect to external speakers (not included) 3.
How to Replace the Turntable Stylus (Needle) Removing the Stylus from the Cartridge 1. Place a screwdriver at the tip of the stylus and push downward as shown in direction “A”. 2. Remove the stylus by pulling the stylus forward and pushing downward. Installing the Stylus 1. Hold the tip of the stylus and insert the stylus by pressing as shown in direction “B”. 2. Push the stylus upward as in direction "C" until the stylus locks into the tip position. TIPS TO BETTER TURNTABLE PERFORMANCE 1.