Hyphy
• Charging Port • Indicator Light • Button A: On/Off (hold for 3 seconds) - Default start mode set to HighFrquency End Vibration (one tap to cycle “up” through preset vibrations) • Button B: Switch from HighFrequency End Vibration to G-Spot End Vibration (hold for 3 seconds) & Vibration (one tap to cycle “down” to preset vibrations)
What's Included (1) Bluetooth® Remote-Controlled Dual-End Vibrator (1) Charging/Storage Case (1) USB Charging Cable (1) User Manual (1) Quick Setup Guide (1) 3 Attachments Specifications Materials Weight Battery Charging Use Time Standby Waterproof ABS Plastic/Body-Safe Silicone 125.
Charging Turn off Hyphy. The cable can be plugged into any USB port or USB/AC power adapter and attached to the toy directly or the charging/storage case. It will take approximately 75 minutes to fully charge. Once it is fully charged, the solid red light will turn off. Note: The magnetic charger will only work if positioned correctly. If a solid red light doesn’t turn on, rotate the cable 180 degrees. Cleaning & Care • Clean Hyphy before and after each use.
Usage Tips • For your first time, we suggest setting the High-Frequency End vibration to low and/or using the attachments and then testing/changing until you find your preferred speed. • It is necessary to properly apply lube to your body and the toy before insertion. Only use water-based lube, as silicone or oil-based lube may affect the silicone casing. • You can adjust the low, medium, and high levels to suit your needs.
Warning • Keep away from extreme heat or cold. • Make sure your toy is recharged at least once every six months. • DO NOT use the toy while charging. • Please make sure you don’t attach the charging cable to any metal or stainless steel materials.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.