User Instructions

Warning:To Avoid Battery Leakage

Instructions

Maximum charge voltage DC 5V,

under 500mA for the build-in battery

Controller

Maximum charge voltage DC 5V,

under 500mA for the build-in battery

・Plug in the DC jack to recharge the bulid-in battery.

・Plug in the USB cable in to the power sources

with appropriate adaptor or USB port from computer

for recharging the vibrator.

・The LED light blinks when the vibrator is being charged.

・The LED light remains on when the vibrator is fully charged.

Vibrator

・Press the button to change

rhythm

・Hold the button 3 seconds

to power off

・Hold the button 3 seconds

to power on

PAGE 1
Instructions Maximum charge voltage DC 5V, under 500mA for the build-in battery Vibrator ・Plug in the DC jack to recharge the bulid-in battery. ・Plug in the USB cable in to the power sources with appropriate adaptor or USB port from computer for recharging the vibrator. ・The LED light blinks when the vibrator is being charged. ・The LED light remains on when the vibrator is fully charged.
PAGE 2
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.