Spec Sheet

DESCRIPTION
The MS-1 Mute Switch is an accessory to Louroe Audio
Monitoring/Audio Surveillance Systems when microphone muting is
required. The MS-1 contains a built-in rocker switch mounted to a
single gang stainless steel face plate. This is to mute or disable the
audio feed to a base station or other receiving and recording
devices. It prevents the operator from listening in to the microphone
when it is not needed, The MS-1 fits into a single gang backbox (not
included) for mounting to a wall or flat surface.
MODEL MS-1
MS-1
MUTE SWITCH
6955 VALJEAN AVE, VAN NUYS, CA 91406
PH: [phone] / FAX: [phone]
/ [e-mail]
®
ms_1_specs_3/15
FEATURES
+
Rocker Switch for muting microphone audio
+
Illuminates when audio is ON
+
Fits in a standard single gang electrical box
for flush or surface mounting
APPLICATION
Interrogation/Interview Rooms
Stairwells
Conference Rooms
Detention Centers
U
R
T
E
C
D
A
I
F
N
U
T
N
H
A
E
M
2 Conductor shielded cable, 22
gauge with a 24 gauge drain wire
NOTE: Unshielded cable is not
satisfactory for audio systems
WIRING REQUIREMENTS
West Penn 452 or equivalent
IMPORTANT NOTICE
When this equipment is used as part of an
audio monitoring system, the law requires
that the public be given notice of AUDIO
MONITORING ON THE PREMISES. A
decal notice is included with each
microphone shipped.
Federal Law References:
Federal Regulations, US Code, Title 18.
Crime and Criminal Procedure, Sec 2510.
AUDIO
MONITORING
On
These Premises
®
TECHNICAL DATA SHEET
SPECIFICATIONS
Supply Voltage
Switch contact
Dimensions
Faceplate
12Vdc
9A @125Vac
Weight
Shipping Weight
2.5 oz
1 lb
2 ¾ W x " 4 ½" H
303 Stainless Steel
Backbox Single gang electrical
box (not included)