Data Sheet

The Model DCS-1 is a duress call station with a panic button
and electret condenser microphone. They are mounted to a
stainless steel faceplate that fits into a single gang electrical
box. As part of an audio monitoring system, Model DCS-1
can activate the Louroe Base Station when the panic button
is pressed, or by sound activation picked up by the
microphone. Unit is compatible only with DG-12II and DG-
25III Alarming Base Stations. When the alarming base
station is activated, personnel can monitor the immediate
area around the DCS-1 location.
dcs_1_specs 3/15
APPLICATION
Parking Structures
Stairwells
Elevator Lobbies
Secured Walkways
Elevators
Detention Centers
FEATURES
+
Contains both a 3kHz oscillator and a
microphone to trigger base station
+
3kHz oscillator for pushbutton activation
+
Stainless steel faceplate
+
Fits in a standard single gang electrical box
for flush or surface mounting
* Single gang electrical box not included
U
R
T
E
C
D
A
I
F
N
U
T
N
H
A
E
M
DCS-1
REMOTE CALL STATION
TECHNICAL DATA SHEET
DCS-1
REMOTE CALL STATION
2 Conductor shielded cable, 22
gauge with a 24 gauge drain wire
NOTE: Unshielded cable is not
satisfactory for audio systems
WIRING REQUIREMENTS
West Penn 452 or equivalent
IMPORTANT NOTICE
When this equipment is used as part of an
audio monitoring system, the law requires
that the public be given notice of AUDIO
MONITORING ON THE PREMISES. A
decal notice is included with each
microphone shipped.
Federal Law References:
Federal Regulations, US Code, Title 18.
Crime and Criminal Procedure, Sec 2510.
6955 VALJEAN AVE, VAN NUYS, CA 91406
PH: [phone] / FAX: [phone]
/ [e-mail]
®
AUDIO
MONITORING
On
These Premises
®
SPECIFICATIONS
Sensitivity
-45 dB
Line Level (0 dBV, 600W @ 1kHZ)
Frequency response 50 Hz to 15 kHz
Output
Current drain
10 mA
Tone output 3 Vrms into 10K
load @ 3 kHz
Supply voltage
12 Vdc
Dimensions
Weight
Shipping Weight
4 1/2“ L x 2 3/4“ W
4 oz
1 lb