Spec Sheet

AOP-SP-CF/AOP-SP-CS
BI-DIRECTIONAL SPEAKERPHONE - Wall Surface and Flush Mount Unit
DESCRIPTION
Model AOP-SP-CF and AOP-SP-CS are ceiling mount
speakerphones designed to interface with various modes of
audio/video transmission systems. They provide bi-directional
audio with the receiving source (DVR, PC soundcard,
,
etc). Both AOP-SP-CF and AOP-SP-CS contain a built-in
electret condenser microphone and a 4” speaker. Also a
control potentiometer for adjusting the sensitivity of both
transmitted and received audio.
AOP-SP-CF is for Flush mounting to ceiling
AOP-SP-CS is for Surface mounting to ceiling
IP
network cameras with audio and video servers with audio
APPLICATION
Model AOP-SP-CF and AOP-SP-CS have the electronics to
provide two-way/talk-listen audio with the following
transmission systems:
DVR’s
IP Network Cameras
PC Soundcards
Video Servers
The above systems can be used as stand alone units or
with Louroe Model AOP-XD audio transceiver interface.
The AOP-XD provides power to the AOP-SP-CF/CS,
contains level controls for 2-way communication and
provides audio filtering to enhance the quality of sound.
,
,
,
,
,
FEATURES
MODEL AOP-SP-CF
2-way Speakerphone
Ceiling Mount-Flush
MODEL AOP-SP-CS
2-way Speakerphone
Ceiling Mount-Surface
aop-sp cf_cs 11/09
+
+
+
+
Omni-directional microphone and 4" speaker
Controls for adjusting volume of both listen
and talkback
Flush or surface ceiling mount models
Hands-free operation for talk/listen
SPECIFICATIONS (Speaker)
Speaker power output
Speaker impedance
Power supply
Speaker magnet
Speaker size
5W
8Ω
12 - 15 Vdc
3 oz. ceramic
4"
R
U
E
T
D
C
A
I
N
F
U
T
N
H
A
E
M
IMPORTANT NOTICE
When this equipment is used as part of an audio monitoring system, the
law requires that the public be given notice of AUDIO MONITORING ON
THE PREMISES. A decal notice is included with each microphone
shipped.
Federal Law References:
Federal Regulations, US Code, Title 18. Crime and Criminal Procedure,
Sec 2510.
AUDIO
MONITORING
E
L
OUROE
LECTRONICS
On
These Premises
WIRING REQUIREMENTS
3 Conductor consisting of:
+
2 Conductor shielded, 20 gauge
with 22 gauge drain
+
1 Conductor unshielded, 20 gauge
All in the same jacket
E
L
OUROE
LECTRONICS
6955 VALJEAN AVE, VAN NUYS, CA 91406
PH: [phone] / FAX: [phone]
[e-mail] / www.louroe.com
AOP-SP-CF/AOP-SP-CS
BI-DIRECTIONAL SPEAKERPHONE
TECHNICAL DATA SHEET
SPECIFICATIONS (Microphone)
Audio output
Microphone element sensitivity
Line level (0 dB @ 600Ω)
unbalanced
-45 dB
Frequency response
Audio Input Impedance
40 Hz - 10 kHz
600Ω
Electret Condenser
Type
Weight,net (AOP-SP-CF) 2.5 Lbs ( 1.1 Kg)
Weight, (AOP-SP-CS) with MR-8 5 Lbs (2.3 Kg)
SPECIFICATIONS (Speaker)
Speaker power output
Speaker impedance
Speaker magnet
Speaker size
1.5W
8Ω
3 oz. ceramic
4” (102mm)
Current Drain
Supply Voltage
200mA
12Vdc
SPECIFICATIONS (Mechanical)
AOP-SP - CF/CS (grill)
AOP-SP-CF (backbox) for flush mount
Inside
Flange
12 7/8” (327mm)
9 ¾” (247mm)
12 5/16” (313mm)
AOP-SP-CS MR8 (Mounting Ring)
for surface mount
12 3/8” X 3”H (314mm H x 76mm)
Depth
4 ½” (114mm)