Manual

PAGE 13 of 28
DG-25III AND DG-MA CONNECTIONS
Connect the DG-25III to the DG-MA as shown in Fig 8. Both control blocks of the DG-
25III and DG-MA are marked “1,2,3,4,5”. Connect terminal “1” of DG-25III to terminal “1”
of DG-MA. Connect terminal “2” of DG-25III to terminal “2” DG-MA; terminal “3” of DG-
25III to terminal “3” of DG-MA; terminal “4” of DG-25III to terminal “4” of DG-MA; terminal
“5” of DG-25III to terminal “5” of DG-MA. Connect the RCA cable between the DG-25III
and DG-MA as shown in Fig 8.
Fig. 8 Connecting the to DG-MADG-25III
ZONE 18
ZONE 15
ZONE 17
ZONE 16
ZONE 19
ZONE 20
1 2 3 4 5
TB GND
TB RETURN
TB AUDIO
ALL CALL CTRL
GND
ZONE 21
JP51
INPUT
AUDIO
OUTPUT
Rear of DG-MA
Rear of DG-25III
RCA Cable
LOUROE ELECTRONICS 6955 VALJEAN AVENUE, VAN NUYS, CA 91406 TEL [phone] FAX [phone]
Website: www.louroe.com Email: [e-mail]
(818)
INSTALLATION AND OPERATING INSTRUCTIONS
DG-25III 2/08