Lorex Baby Camera User Manual Ver. 1.
Overview Micro USB Power Port Temperature Sensor Speaker LED Indicator Mic Night Light Button Night Light WPS Button Power /Mode Button Wall Mount microSD Card Slot Micro USB Port English | 1
Getting Started Power On Please connect the camera with the provided power adapter. Press Power button for 1 second, you'll see the red light flashing and then change to orange in a few seconds. That means the camera is ready. Before you start, you need: 1. Please download [LOREX WONDER] from Google Play or Apple Store on your mobile before camera setup. 2. Before connecting your camera to internet, please make sure you have a WiFi AP and a mobile connected to internet.
Connect camera to internet Now you need to do two things. First, setup a WiFi AP for your camera. Second, add the camera to your mobile. 1) Setup a WiFi AP for your camera Step 1. Step 2. (iOS) (Android) Turn on Wi-Fi on your mobile and select camera (Lorex-XXXXX) as the AP. This will enable a connection between your mobile and camera. LOREX WONDER Tap to run LOREX WONDER APP. Step 3. Tap Step 4. in main page. Choose the camera and tap .
Connect camera to internet Step 5. House AP Lorex-lnh003484158 lnh003484158 Tap to select the WiFi AP for camera to connect internet. Step 6. Lorex-lnh003484158 Lorex-lnh003484158 lnh003484158 lnh003484158 House AP Password is strongly reconmended. And then tap . 4 | English House AP Tap to go back to main page. Camera LED will flash and turn to steady green.
Connect camera to internet 2) Add the camera to your mobile Step 7. Step 8. (iOS) (Android) or Press (iOS) or (Android) to go to your mobile settings. You need to switch the AP or 3G/4G for internet connection. Step 9. Step 10. Run LOREX WONDER APP. Tap to add the camera to your mobile. Tap to scan your camera ID or you can key-in camera ID manually. (for Android: you will be guided to install barcode scanner app if it's not on your mobile.
Connect camera to internet Step 11. Step 12. lnh003484158 lch003484158 lnh003484158 Tap and then shoot a picture for easy camera identification. Tap , then tap Your camera is added. 3) Start Live View Step 13. Step 14. You will see your camera in main page. Now tap you camera name. You should be able to live view from your camera now. 6 | English .
Audio & Video features Tap to take a photo to your mobile storage. Tap to record a video to your mobile storage. again to stop. and tap Tap Tap to mute the sound from the camera. and start talking, your baby will hear your voice from camera. And tap again to stop.
Audio & Video features Tap for audio only monitoring.
Alert Notification Camera provides 3 kinds of alert settings to monitor your baby. 1. Audio Detection 2. Motion Detection 3. Temperature Alert An alert email and mobile message will be sent to you if any of alert settings go off. Step 1. Step 2. In main page, tap and go to setup page for [Alert Notification] setting. Setup alert settings and enter e-mail address then tap .
Getting Help Q1: Do I need to go from step 1 to step 14 all over again if there's another mobile'd like to get connected as well? A1: If you've completed the internet connection of camera with the 1st mobile, you could just start from step 7 for the other mobile(s). Q2: If I'm outdoors and have no internet access, how do I make the camera work? A2: If you're outdoors and AP is not available, there's a simple way for you to see the camera. Step 1. Step 2.
Getting Help Q3: How to power off your camera? A3: You can press Power button for 3 seconds to turn it off (with 3 beep sound). Q4: What can I do when camera is no response? A4: You can press Power button for 10 sec to reset camera back to power off state. To turn on camera again, you need to press Power button twice. Q5: How to use WPS button? A5: You can use WPS button to connect camera to internet. Step 1. Step 2. WPS Press the WPS button on AP.
FCC Regulations: § 15.19 (a)(3) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. § 15.
as the Specific Absorption Rate (SAR). The SAR limit adopted by the FCC is 1.6W/kg for an uncontrolled environment. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines.
All trademarks belong to their respective owners. No claim is made to the exclusive right to use the trademarks listed, other than the trademarks owned by Lorex Technology Inc. We reserve the right to change models, configurations or specifications without notice or liability. Product may not be exactly as shown. Images are simulated.