VIDEO BABY MONITOR USER’S GUIDE BB2411 Version 1.
Safety Precautions • Adult assembly is required. Keep small parts away from children when assembling. • This product is not a toy. Do not allow children to play with it. • This video monitor is not a substitute for responsible adult supervision. • Test the video monitor before use. Become familiar with its functions. • Keep the cords out of reach from children. • Never use extension cords with power adapters. • Only use the chargers and power adapters provided.
Table of Contents: Product Includes ...............................2 Camera Overview ............................3 Getting Started ................................4 Optional - Camera Batteries...................... 6 Optional - Wall Mounting the Camera........ 7 Using Your Baby Monitor .................8 Using the Menus...................................... 8 Talking to Your Baby................................. 9 Changing Channels.................................. 9 Adjusting Volume.......................
Product Includes x1* x1* Power Adapter Camera x2* x2* x2* Screws & Anchors Cable Clips x1 x1 Power Adapter Monitor *Contents may vary by model Monitor Overview Sound LED’s Select camera/Scan Display Start/stop lullaby Power/video on/off Volume up Volume down Power LED Link LED Menu/Zoom Microphone Speaker Power port 2
Antenna Battery compartment Camera Overview Night-light Light sensor Nighttime LED’s Lens Antenna Microphone Power LED Mounting stand AAA Battery Compartment Power switch Power port Temperature sensor Speaker PAIR button 3 ENGLISH Belt Clip
Getting Started 1 Connect the power adapter to the camera. Make sure all power cables are at least 3ft / 1m away from the crib and out of reach of your child. 2 Slide the power switch to ON. Power switch 3 Press down on the battery compartment door and slide it off the monitor.
4 Connect the battery cable to the monitor. ENGLISH Battery cable The battery cable only connects one way. Do not force the battery cable. 5 Replace the battery compartment door. 6 Connect the power adapter to the monitor. 7 Press and hold the power button to turn on the monitor.
Tips • It is recommended to charge the battery for 6 hours before use. • For overnight monitoring, it is recommended to connect the power adapter. The monitor will stay on about 6 hours when fully charged. • For better reception, extend the monitor’s antenna. Pull up to extend antenna Optional - Camera Batteries Unscrew the battery compartment under the camera and insert 4x AAA batteries (not included). Replace the battery compartment door and screw.
Optional - Wall Mounting the Camera Make sure all power cables are at least 3ft / 1m away from the crib and out of reach of your child. Use the included cable clips to help manage the power cable. Cable Clips 1 Drill 2 holes in the wall with centers exactly 68mm apart. 2 Tap anchors into holes with a hammer. Insert screws 2/3 of the way. 3 Align the mounting points with the screws and push the camera down.
Using Your Baby Monitor The monitor shows the following icons during use: Icon Meaning Icon Meaning Signal strength VOX VOX (Voice Trigger) on Selected 1 channel Scan Battery full Scan mode activated Battery low Battery charging Volume muted X2 Digital zoom activated 68°F Song currently 2 playing Current room temperature Camera out of range or off (e.g.
Talking to Your Baby ENGLISH Press and hold to talk to the selected camera Changing Channels 1 Press to cycle through connected cameras or select Scan mode. The currently selected camera is shown on screen. The monitor only plays sound from the camera that is currently being viewed. When Scan mode is activated, the monitor changes channel automatically every few seconds. A Scan icon appears next to the currently selected channel number.
Adjusting Volume Press to adjust the volume coming from the camera Adjusting Screen Brightness 1 Press until is shown 2 Press to adjust brightness 3 Press to exit menu.
Using Digital Zoom 1 Press and hold to zoom in. An X2 icon and arrows appear on the screen. 2 X2 Press to move zoom area left/right Press to move zoom area up/down 3 Press and hold to zoom out. Turning on the Night-Light 1 OFF Press until is shown 2 Press to turn the night-light on or off for the currently selected camera. 3 Press to exit menu.
Playing Lullabies The camera can play 5 different pre-loaded songs. To play songs: 1 Press to play a song on the selected camera. 2 2 Right after pressing , press to change the song. The song number is shown on the monitor. If volume controls appear, press twice to restart the song. Volume controls will appear if you press a few seconds after pressing . 3 Press to stop playing the song.
Temperature Alerts You can control the high and low temperatures that trigger alerts or disable temperature alerts. To setup temperature alerts: ENGLISH The temperature alert feature allows you to ensure the baby’s room is at a comfortable, safe temperature. The monitor beeps if the temperature gets too hot or cold. 1 Lo 66° F Press until 2 Lo is shown. Press to adjust the low temperature.
Selecting Fahrenheit or Celsius You can select if you would like temperature readings and alerts to be in Fahrenheit or Celsius. To select temperature units: 1 °F Press until 2 Press C (Celsius) 3 Press is shown. to select F (Fahrenheit) or to exit menu. Enabling VOX Mode (Voice Trigger) In VOX mode, the monitor goes into standby. When sound is detected by the camera at the preset audio level, the monitor’s screen instantly turns on. This conserves battery power, and alerts you only when needed.
2 Press to adjust the audio sensitivity for VOX mode. VOX mode is off VOX VOX mode is on Low sensitivity High Sensitivity Medium Sensitivity ENGLISH VOX OFF If you want softer noises to trigger the monitor (such as a faint whimper), set the sensitivity setting higher. If you only want louder noises to trigger the monitor (such as a loud cry), set the sensitivity setting lower. 3 Press to exit menu.
Pairing Additional Cameras The camera(s) included have already been paired with the monitor. If you have purchased additional add-on cameras (model# BB2411AC1), OR if your monitor and camera are not paired up, follow the steps below. To pair a camera to your monitor: 1 Place the camera and monitor next to each other. Make sure the camera is turned on. 2 C1 Press and hold until is shown 3 Press to select the channel you would like to pair the camera to.
5 Press the PAIR button on the back of the camera. ENGLISH PAIR button Images from the camera are immediately shown on the monitor once the camera is successfully paired. Notes • Immediately move the camera away from the monitor to avoid speaker feedback. • The monitor can connect up to 4 cameras.
Technical Specifications Camera Frequency 2.4GHz Maximum Range Up to 450ft / 138m outdoors* Up to 150ft / 46m indoors* Image Sensor 1/5” Color CMOS Lens 3.6mm F2.8 IR LED 6 pcs Power Adapter 6.0V DC 800mA Battery Supports 4x AAA Batteries (not included) Weight 0.3lbs 0.1kg Monitor Frequency 2.4GHz Display 2.4” TFT Color LCD Power Adapter 6.0V DC 800mA Battery Li-ion Rechargeable Battery 3.7V DC 1500mAh Weight 0.3lbs 0.1kg *Based on unobstructed line of sight.
Troubleshooting Problem Solution • Press and hold the button to power on the monitor. • Monitor is out of batteries. Plug in the monitor power adapter. • Video Off or VOX mode is on. Press any button to turn the screen back on. Monitor screen keeps turning off • VOX mode is on. See “Enabling VOX Mode (Voice Trigger)” on page 14 for details on disabling VOX mode. • The monitor battery is low.
CLEANING Clean the monitor and camera with a slightly damp cloth or an antistatic cloth. Never use cleaning agents or abrasive solvents. • Do not clean any part of the product with cleaners with thinners or other solvents and chemicals. This may cause permanent damage to the product, which is not covered by the Warranty. When necessary, clean it with a damp cloth. • Keep your camera and monitor away from hot, humid areas or strong sunlight, and do not get it wet.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
USER’S GUIDE BB2411 Version 1.0 Copyright © Lorex Technology Inc.