ACCHM1_QSG_TRILINGUAL_R1.indd 1 En Wi-Fi Chime ACCHM1 Series Quick Start Guide lorex.
What’s included Wi-Fi Chime Power plug Pin Installation To attach the power plug, hook the power plug’s bottom tab into the chime slot and push in. ACCHM1_QSG_TRILINGUAL_R1.indd 2 To detach the power plug, hold onto the plug then push up on the detach switch.
Wi-Fi Chime overview Front Status indicator Back Solid blue Operating correctly. Speaker Reset Detach switch Status indicator Pairing button ACCHM1_QSG_TRILINGUAL_R1.indd 3 Power plug Slot Flashing blue • Ready for connection. • Network connection failed. Use the pin to reset. Dimensions Height: 3.9” (99mm) Width: 2.
App setup 1. Scan the QR code on this page to download the free Lorex Home app from the App Store or Google Play Store. 2. Open the Lorex Home app. 3. Sign in or sign up and create an account. 4. Plug the Wi-Fi Chime into a outlet. 5. Once the status indicator flashes blue and the startup chime sounds, tap the + icon. 6. Scan the device QR code on the chime and tap Next or tap Manually enter Device ID. 7. Follow the in-app instructions to complete the setup. ACCHM1_QSG_TRILINGUAL_R1.
Link to the 2K Video Doorbell There are two ways to link the Wi-Fi Chime to the 2K Video Doorbell. • During the doorbell setup: When the Chime Type screen appears, select your Wi-Fi Chime, then tap Complete. • After the doorbell setup: 1. Tap the ••• icon for the 2K Video Doorbell. 2. Tap Doorbell Chime, then tap Wi-Fi Chime. 3. Select your chime, then tap Save. ACCHM1_QSG_TRILINGUAL_R1.
Copyright © 2021 Lorex Corporation As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved. Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules.
Copyright © 2021 Lorex Corporation This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence.
