User's Manual

ManualsBrandsLooxcie ManualsCamera & PhotoLooxcie Standard Definition Mountable Video Camera Product with integrated 802.11 b/g

Table Of Contents

Looxcie Lookout User’s Guide

Lookout User’s Guide

The Looxcie Lookout is a lightweight, wearable camera that allows you to stream live video from your

point of view without interfering with your ability to perform your work. The Lookout should already be

preconfigured to use a WiFi connection to stream your live video to a secure Vidcie domain for remote

viewing by your colleagues. (If not, have your Vidcie tech use the Vidcie Cam Configurator tool to

configure your camera for your WiFi.)

This guide explains how to:

• Charge the Looxcie Lookout battery.

• Turn the camera on and off.

• Understand the LED status light.

• Record on-camera (if that functionality is enabled for your Lookout).

• Troubleshoot the camera.

Charging the Lookout Battery

Full charge the Lookout battery before first use.

To charge the battery:

1. Verify the power switch is OFF (switch is pushed toward rear of camera)

2. Plug the USB cable into the camera’s micro-USB port.

3. Plug the other end of the cable into a USB port on your computer or other USB charger.

Average charge time is 3-4 hours. The camera’s status light flashes green while charging. It turns solid

green when the battery is fully charged.

For hardware reset: Push and hold both the

Reset button on the bottom of the camera and

the Record button together for 3 seconds.

Micro-USB port

Record button

Status LED

Power switch (on back side of camera)

Reset button

Summary of content (4 pages)

PAGE 1
Looxcie Lookout User’s Guide Lookout User’s Guide The Looxcie Lookout is a lightweight, wearable camera that allows you to stream live video from your point of view without interfering with your ability to perform your work. The Lookout should already be preconfigured to use a WiFi connection to stream your live video to a secure Vidcie domain for remote viewing by your colleagues. (If not, have your Vidcie tech use the Vidcie Cam Configurator tool to configure your camera for your WiFi.
PAGE 2
Looxcie Lookout User’s Guide Turning the Camera On and Off To turn the camera on: • Slide the Power switch, located on the side of the camera, toward the front of the camera. When you turn the camera on, it immediately seeks a WiFi connection and begins streaming live video to your secure server. To turn the camera off: • Slide the Power switch toward the rear of the camera, away from the lens.
PAGE 3
Looxcie Lookout User’s Guide Troubleshooting My camera does not turn on. Press and briefly hold the Record and Reset buttons at the same time. If that does not work, charge the camera’s battery. My camera does not connect to WiFi (the LED status light continues to blink GREEN). Check to see if your WiFi network is on. If it is, you may try powering the WiFi device off and on again to reset it. If your camera still does not connect, make sure you are within range of your WiFi device.
PAGE 4
Looxcie Lookout User’s Guide FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.