User's Manual

Table Of Contents

Quick Installation Guide

Model: LP-8697N

NOTE: Do not insert the USB adapter until the software/driver has been installed.

High Power Wireless-300N Compact USB Adapter

Insert the Setup CD Install Software

The menu page should appear.

Select the instruction for your operating system and

install the driver for the USB adapter.

Follow the Instructions for Driver Installation

A. From the Menu page, select Driver Installation B. Start the Driver Installation

If the Menu page does not appear, browse the if prompted, click Next to begin the installation

CD drive and double-click the autorun.exe file

C. Continue the Driver Installation D. Restart your Computer

Follow the instructions that appear for installation A prompt will appear asking you to restart your

computer. Select Yes and click Finish to restart.

E. Insert the High Power USB Adapter

After the computer has fully rebooted, locate a USB port and insert the

USB Adapter. Windows should automatically begin to install the driver

for using the USB Adapter.

PAGE 1
Quick Installation Guide Model: LP-8697N High Power Wireless-300N Compact USB Adapter NOTE: Do not insert the USB adapter until the software/driver has been installed. Insert the Setup CD Install Software The menu page should appear. Select the instruction for your operating system and install the driver for the USB adapter. Follow the Instructions for Driver Installation A. From the Menu page, select Driver Installation B.
PAGE 2
Quick Installation Guide Model: LP-8697N Windows 7 1. Connect to a Wireless Network 2. Connect to a Wireless Network Locate the Wireless Icon in the Windows System tray (bottom right corner) and click it to view available wireless Networks. Highlight your desired network and click Connect. If the network you are trying to connect to has security enabled you will need to enter it here. Windows 8.1 1. Connect to a Wireless Network 2.
PAGE 3
Quick Installation Guide Model: LP-8697N How to Upgrade your Antenna Upgrading your antenna can provide more range and distance for different types of wireless applications. The Loopcomm High Power USB Adapter is compatible with any High Gain 2.4 GHz Wi-Fi antenna with a RP-SMA connector. Simply unscrew the original antenna and screw on the upgraded antenna for more range and distance. For more information on High Gain antennas visit our Loopcomm website.