Product Info

Table Of Contents

LOON CUP Beta version TEST

2. Your device has 2 buttons.

1. Disinfect

Do NOT put the cup in the microwave.Do NOT use boiling water.

Only use soap and warm water to clean the cup.

3. Inserting the Device.

You need to turn the cup on before inserting it at the start of your period.

note :

- when you empty the cup and rinse and reinsert the cup, there is no need to power the cup oﬀ and on.

The on/oﬀ button is placed at the bottom of the cup as shown.

ON/OFF : short press

SYNC : Long press until the red light comes in

InsertPower on

Press the on/oﬀ button inside the cup. The device

will turn on after the green light ﬂashes rapidly

4 times.

4 times

After you check the light has ﬂashed, insert the cup.

* If your device is not on, data will not be recorded.

Please remove the FCC label (  )

attached to the product before use.

  

PAGE 1
LOON CUP Beta version TEST 1. Disinfect Do NOT put the cup in the microwave.Do NOT use boiling water. Only use soap and warm water to clean the cup. 2. Your device has 2 buttons. The on/oﬀ button is placed at the bottom of the cup as shown. ON/OFF : short press SYNC : Long press until the red light comes in * Please remove the FCC label ( ) attached to the product before use. 3. Inserting the Device.
PAGE 2
4. Syncing the Device You need to turn on bluetooth to synch it with your mobile device Phone setting Power on Bluetooth & Syncing Power oﬀ sync 1) Activate bluetooth on your phone then press the sync button at the upper-right corner of the screen. 2) Press and hold the button inside the cup until the red light appears. The sync will begin after the red light comes on. 3) The cup will turn oﬀ automatically when the sync is completed, but also when the sync fails.
PAGE 3
FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.