SMART MIRROR USER MANUAL LED Mirror with Front and Backlit
SAFETY INSTRUCTIONS Thank you very much for choosing our led lighted mirror. For your safety, it is very important that the following instructions are read carefully and completely before beginning the assembly and installation of this lighting fixture: WARNING -TO REDUCE THE RISK OF BURNS, FIRE, ELECTRICAL SHOCK OR INJURY TO PERSONS: 1. It is strongly recommended that two or more adults install this led lighted mirror. 2. Disconnect power at the circuit breaker before putting on or taking off parts.
PRE-ASSEMBLY PRE-ASSEMBLY ATTENTIONS: 1. After opening the package, please inspect the product immediately for any damage during transit or missing parts. 2. Remove all parts and hardware from the box along with any plastic protective packaging. 3. Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware. 4. Before drilling, please ensure there are no hidden cables or pipes (water, gas, or electrical) behind hanging points. What's in the box No.
WALL ANCHORING Secure it! Wall Anchoring Guide 1.This mirror must be securely attached to the wall. The hardware used to secure your mirror to the wall depends on your wall material. If your wall material is not listed or if you have any questions, consult with a local hardware retailer. 2.The wall anchors(D) and mounting screws(C) are intended for use with solid wall applications only (concrete or brick mortar).
WIRE CONNECTION Safety First! Wire Connection Guide There are two ways to connect the power. You can connect the wires directly to your junction box or insert the plug directly into the wall socket. - Grounding Instructions: This product must be connected to a grounded metal permanent wiring system or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the product.
EASY TO INSTALLATION Attach the hole-positioning map to the wall using masking paper. Use the included top mounting bracket with a spirit level to ensure the paper is aligned horizontally. Gently puncture the hole map at each hole position using a Phillips-head screwdriver, marking the points on the wall. (Be careful not to drill directly through the map, as it 1 3" minimum can cause wrinkles and affect the accuracy of the hole positions.) 2 Remove the hole positioning map.
EASY INSTALLATION 4 Plug the plastic anchors into the holes. 5 Fasten the mounting bracket to the wall. 6 Connect the power supply. (ref. to page 4) 2 adults to hang the mirror.
BUTTON CONTROL TURN ON/OFF: Touch once to turn on the lighting and touch three times to turn it off. STEPLESS DIMMING: Long Hold to dim or brighten the light. (Factory setting: the brightness has been adjusted to 100%; if you think it is too dazzling, you can long press it again to reduce the brightness to your preferece) COLOR: Hold to switch the color temperature of the light. DEFOGGER: Touch to turn on/off defogging function. When defogger is on, the button should be in white color.
PRODUCT SPECIFICATION No. of Top Mounting Bracket No. of Screws & Wall Anchor for Bracket (Set) 1 2 2 1 3 6 6 4 500 2 2 1 8 8 4 350*500 410 2 8 350*1000 500 2 8 Mounting Bracket (mm) Size (mm) Input Power Input Current Defog Size (mm) 20"*28" 24"*36" 24"*40" 28"*36" 508*710*38 607*912*38 607*1016*38 710*912*38 36W 36W 36W 36W 1.5A 1.5A 1.5A 1.5A 250*250 300*400 300*400 300*400 280 280 280 410 28"*60" 30"*55" 32"*40" 710*1524*38 760*1397*38 810*1016*38 48W 48W 36W 2A 2A 1.
CUSTOMER SERVICE WARRANTY: This product is guaranteed to operate 1 years from the original date of purchase. This warranty is considered void if the product fails from misuse. lf, under normal use and for the full time period, your product fails to operate, We will be glad to solve the problem for you! CARE & CLEANING: 1. Use a household liquid glass cleaner to keep the mirror surface clean. 2. Do not use abrasive cleaners containing ammonia.