Camera Quick Start Guide Please read this manual carefully and keep it properly before using our network camera products. Related tools and documents of products, please download from http://www.herospeed.net.
Statement Thank you for using our products, please read this manual carefully before trying. This manual is applicable to network series products. This manual may contain information that is technically inaccurate, inconsistent in the product's function and operation, or in a typographical error. Our company will update the context in the manual according to the enhancement of product features. Updated content will be added in the new version of this manual without further notice.
Please avoid pointing the lens at strong light (such as lighting, sunlight or laser beam, etc.), otherwise it will damage the sensor. Power must be under safety certification, Its output voltage, current, voltage polarity and operating temperature must comply with the power requirements of this equipment. When using this equipment in thunder and lightning conditions, please pay attention to install lightning protection device or cut off the power.
1.Network Setting The default IP of all cameras is 192.168.1.168. The IPv4 address of the computer must be in the same network segment as the IP address of the IP camera. To enable the camera to access the network smoothly, plan the available IP network segments based on the actual network environment. Prepare the network configuration: (1) Add the same network segment IP as 192.168.1.168 (camera factory default IP) in the computer, such as 192.168.1.165.
The network configuration steps are as follows: Step 1:Open [ Search Tool] (Version 7.2.45.6 and above, please install Search Tool from http://www.herospeed.net). Step 2: Check 192.168.1.168. Step 3: Modify the relevant network parameters such as IP on the right side of the interface Step 4: Enter the user name (default is admin) and password (default is admin) of the device. Step 5: Click [Modify] → [Confirm].
2. Modify password Step 1: Open the IE browser, enter the IP address of IP Camera (if the IP has not been modified, please enter the default address http://192.168.1.168), and press [Enter]. Step 2: Enter the user name (default is admin) and password (default is admin) of the device, and click [Login].
Step 3: Click [Modify], enter the password, confirm the password, and set the security question, click [Key Export] → [Save].
3. Real-time Preview Step 1: Click [Download plugin], download the plug-in, close the browser, and follow the prompts to install the plug-in. Step 2: Open the browser and log in to the IPC WEB interface again to preview the real-time video. NOTE: If the browser you use is not IE, you can directly enter the preview video interface without installing a plug-in.
4. Parameter Configuration Click [Configure] can enter the device configuration interface, there are local configuration, system, local network, video, image, event and other functional configurations. Users can set these functions according to the actual situation of the application scenario to achieve the best monitoring effect.
5. Wi-Fi Configuration The steps for connecting IPC to wifi are as follows: Step 1 : After logging in, click [Wifi Configuration] to enter the WiFi configuration interface. Step 2 : Click [Scan] to search for nearby WiFi hotspots; Step 3 : Select the WiFi to be connected and enter the WiFi password in the key bar. Step 4 : Enable [DHCP], click [Save]. NOTE: When the camera is connected to wifi, you can also choose not to enable DHCP.
6. Smart Event Click [Configuration]→[Events]→[Smart Event] to enter the Smart Event configuration interface, Smart IPC supports Intelligent Detection, Intrusion Detection, Line Cross Detection, Loiter Detection, and People Gather Detection. Intelligent Detection: In the Smart event interface, click [Intelligent Detection], select the detection mode and [Upload face capture to FTP], click [Save].
7. NVR adds IPC Before adding devices, please make sure that the IP addresses of NVR and IPC are on the same network segment and do not conflict. Click [Channel] → [Camera] → [Search] under the NVR main menu, check the devices to be added, and click [Add]. NOTE: In the main menu of NVR, you can also perform operations such as video settings, video playback, motion detection, and encoding parameter settings.
8. iVMS320 Client Access Step 1: Open your browser and visit http://www.hero- speed.net/. Step 2: Click [PC Client] → [iVMS320 (Windows)] or [iVMS320 (Mac)] to download the latest version of the video management system [iVMS320]. Step 3: Follow the prompts to install and add devices to view and manage the devices. 9. Mobile App Access Scan the QR code below to download and install the BitVision App.
Disclaimer The following exemptions or limitations of liability, please pay special attention to: As a result of the following reasons, if the product interrupts or terminates the service for any of the following reasons, the company shall not be liable for personal injury or property damage to you or a third party.
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
