T9560 EZ Paging System Transmitter U S E R M A N UA L T9560 EZ 13 14 15 16 17 18 19 20 www.pager.net Usage, Installation, Warranty and Service Information Long Range Systems, LLC 4550 Excel Parkway, Suite 200 Addison, TX 75001 800.437.4996 • www.pager.
Table Of Contents Long Range Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Keypad Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Setting Operation Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Paging Your Pager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Message to Your Pager . . . . . . . .
Long Range Systems Thank you for choosing Long Range Systems to provide your on-premise paging solution. We provide cutting edge products and first-rate service to satisfy your needs for years to come. Please familiarize yourself and your staff with the contents of this instruction in order to properly operate and maintain your system.
Paging Your Pager The T9560 will page single pagers numbered from 1-799. To page a pager from 1-20, simply press the pager number on the keypad. Example: To page pager #12, press 12. To page a pager number from 21 to 799, press the PGR button, followed by the pager number. Example: To page pager #22, press PGR-2-2-Enter, or PGR-2-2 (this will send page, but with a delay) To use the All Page, press PGR-9-1-1. This will immediately send a page to all pagers.
976 – Glow 5 Minutes 977 – Glow 15 Times SP4 Staff 960 – Vibe Once 961 – Vibe Twice 962 – Vibe 3 Times 963 – Vibe/Beep Once 964 – Vibe/Beep Twice 965 – Vibe/Beep 3 Times Pager Programming The T9560 can program any LRS Pager type. The transmitter’s current mode of operation must match the desired pager type to program. (Example: To program an SP4, the transmitter must be set to the SP4 Staff Mode.
for the individual pager number and 1 for Group Number. To turn ON Group Paging, press PROG-9-9-1-Enter. To turn OFF Group Paging, press PROG-9-9-0-Enter. When Group Paging is enabled, select up to 5 Group Numbers to set and define in the transmitter.
Cleaning & Charging Instructions For LRS Paging Equipment Cleaning: LRS pagers are made from industrial-strength, polycarbonate material. However, this material is susceptible to hairline cracking if non-approved cleaners are used. When cleaning LRS pagers, we recommend only using ISOPROPYL ALCOHOL-BASED CLEANERS. To clean the equipment: 1. Take a clean rag and an isopropyl-alcohol based cleaner 2. Soak the clean rag with the isopropyl alcohol cleaner 3. Wipe down the pagers or equipment.
Troubleshooting Transmitter Unit Transmitter Display does not light when a key is pressed • The proper power supply for this transmitter is 12VDC 2.
Service Questions and Answers Should your paging system ever fail or should you need additional paging supplies, please call Long Range Systems at (800) 437-4996. Our office is open Monday through Friday 8:30 am to 5:00 pm Central Standard Time. For weekend or evening emergencies: Long Range Systems has 24/7 live Technical Support available via (800) 437-4996.
Warranty Long Range Systems, LLC permits a one-year manufacturer’s warranty following the original consumer purchase date of any LRS system. Any individual components or products purchased will receive a 30-day manufacture warranty. This warranty covers any defects due to faulty material or workmanship, but does not include damage to the product resulting from accident, misuse or improper electrical connection.
