MODEL KF-100 LOJACK CORPORATION 333 Elm Street Dedham, MA USA 02026 (781) 326-4700 Fax (781) 326-7255
Product Description: The MS100 motion sensor is vehicle mounted and monitors vibrations resulting from movement of the vehicle. The MS100 motion sensor is triggered after the piezo film sensor mounted on the PCB detects movement for a continuous one-minute period. The motion sensor, which is a three wire device, provides a positive output when triggered. The MS100 motion sensor device contains a receiver that receives a signal from the KF100 Key FOB.
Adjustments: The MS100 film sensor and KF100 Key FOB are pre adjusted from the manufacturer and “DO NOT” require additional tuning or adjusting. Wiring: The MS100 film sensor has three wires that must be connected in order for the module to work properly. The “RED” wire is connected to positive volts DC. The “BLACK” wire is connected to negative 12 volts DC.
LOJACK CORPORATION, 333 Elm Street. Dedham, MA USA 02026 (781) 326-4700 Fax (781) 326-7255 www.lojack.