User Manual

Setting Up Your Dell™ BT Travel Mouse (Part 1)
CAUTION:
Before you set up and operate your
Dell computer, read and follow the
safety instructions in your computer
Owner’s Manual.
Note: If you have
the Widcomm
Bluetooth Software
installed or run the
Microsoft Vista OS
on a Dell notebook
computer,
complete the steps
on part 2 or part 3.
If you have the Toshiba Bluetooth Software installed on a Dell notebook computer, complete
the following steps:
All required mouse software is pre-installed on your notebook computer. If you must restore
this software, insert the Setup CD-ROM, and then follow the on-screen instructions (about 5
minutes).Note: To uninstall your mouse software, in the Windows Control Panel, click
Add/Remove Programs, and then remove the SetPoint program.
1
Turn off any other Bluetooth-enabled mice, because during setup, the receiver may detect such
devices if they are in the 33 foot (10 meter) signal range.
2
Insert two batteries into your mouse, and
then turn it on (I).
3
A. Do one of the following:
•If your computer’s Bluetooth LED is on (blue), proceed to step B.
•If your computer’s Bluetooth LED is off, please follow your computer’s user manual to enable the
Bluetooth radio.
E. Wait for a minimum of 20 seconds while the Searching for Bluetooth devices
window appears to let your computer connect with your mouse.
F. When the connection is complete and Dell BT Travel Mouse appears in the
list, select the mouse, and click next.
Setting Up Your Dell™ BT Travel Mouse (Part 2)
CAUTION:
Before you set up and operate your
Dell computer, read and follow the
safety instructions in your computer
Owner’s Manual.
Note: If you have
the Toshiba
Bluetooth Software
installed or run the
Microsoft Vista OS
on a Dell notebook
computer, complete
the steps on part 1
or part 3.
If you have the Widcomm Bluetooth Software installed on a Dell notebook computer,
complete the following steps:
All required mouse software is pre-installed on your notebook computer. If you must restore
this software, insert the Setup CD-ROM, and then follow the on-screen instructions (about 5
minutes).Note: To uninstall your mouse software, in the Windows Control Panel, click
Add/Remove Programs, and then remove the SetPoint program.
C. In the Bluetooth Settings window that appears, click New Connection.
D. When the Add New Connection Wizard appears, press the
Bluetooth button on your mouse for 2 seconds, and then click Next in
the Add New Connection Wizard. Note: Be sure to complete steps E
and F within 3 minutes; otherwise, return to step B.
B. In the Windows taskbar at the bottom of the screen, right-click , click Start Bluetooth, follow the
instructions to activate Bluetooth, and then double-click .
C. In the Bluetooth Settings window that appears, click Next.
B. In the Windows taskbar at the bottom of the screen, right-click , click Start Using Bluetooth, follow the
instructions to activate Bluetooth, right click , and then click Bluetooth Setup Wizard.
1
Turn off any other Bluetooth-enabled mice, because during setup, the receiver may detect such
devices if they are in the 33 foot (10 meter) signal range.
2
Insert two batteries into your mouse, and
then turn it on (I).
3
A. Do one of the following:
•If your computer’s Bluetooth LED is on (blue), proceed to step B.
•If your computer’s Bluetooth LED is off, please follow your computer’s user manual to enable the
Bluetooth radio.
E. When the Bluetooth Device Selection window appears, press the
Bluetooth button on your mouse for 2 seconds, and then wait a minimum
of 20 seconds until Dell BT Travel Mouse appears in the list.
D. In the Bluetooth Service Selection window that appears, select Human Interface
Device, and then click Next.
F. In the Bluetooth Device Selection window, double-click Dell BT Travel
Mouse to let your computer connect with your mouse.
E. When the Bluetooth Device Selection window appears, press the Bluetooth button on your mouse
G. In the Confirmation Required window that appears, click Click here
before the countdown reaches zero to confirm that the correct mouse is
connected.
G. Close the Bluetooth setting window that appears (With Dell BT Travel Mouse
in the list) by clicking X in the upper-right corner.
Setting Up Your Dell™ BT Travel Mouse (Part 3)
CAUTION:
Before you set up and operate your
Dell computer, read and follow the
safety instructions in your computer
Owner’s Manual.
Note: If you have the
Widcomm Bluetooth
Software and Toshiba
Bluetooth Software
installed or run the
Microsoft Vista OS on a
Dell notebook
computer, complete
the steps on part 1 or
part 2.
If you have the Microsoft Vista Operation System installed on a Dell notebook computer,
complete the following steps:
All required mouse software is pre-installed on your notebook computer. If you must
restore this software, insert the Setup CD-ROM, and then follow the on-screen
instructions (about 5 minutes).Note: To uninstall your mouse software, in the Windows
Control Panel, click Add/Remove Programs, and then remove the SetPoint program.
On Off
On Off
On Off
On Off
On Off
On Off
On Off
On Off
On Off
On Off
Bluetooth
Bluetooth
C
M
Y
CM
MY
CY
CMY
K
Mouse for Dell QSG_1.ai 2007/2/8/¬P´Á¥| ¤U¤È 15:16:27Mouse for Dell QSG_1.ai 2007/2/8/¬P´Á¥| ¤U¤È 15:16:27
Bluetooth Mouse M-RCG-DE L 6